LG Electronics 47VL10 owner manual Installing on a wall

Page 10

10ASSEMBLING AND PREPARING

Installing on a wall

 

CAUTION

ENGLISH

Install the monitor at least 10 cm away from the wall and leave about 10 cm of space at each side of the monitor to ensure sufficient ventilation. De- tailed installation instructions can be obtained from your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket.

10 cm

10 cm

10 cm

10 cm

If you want to mount the monitor on the wall (op- tional), attach the wall mounting bracket to the rear of the monitor.

Make sure that the wall mounting bracket is se- curely fixed to the monitor and to the wall.

Use the wall mount plate and screws that comply with the VESA standard as specified below.

yy785mm(31 inch) or greater

*Fastening screw: Diameter 6.0 mm x Pitch 1.0 mm x Length 10 mm

(32 inch is Diameter 4.0 mm x Pitch 0.7 mm x Length 10 mm)

yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.

yyUse the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit includes an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

yyFor more information, refer to the instructions supplied with the wall mount.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Monitor Signage Contents Licenses Accessories Assembling and PreparingCable management Cable holder Cable Tie Optional AccessoriesStand Screws Speaker Stand hole coverScreen Buttons Screen Marks Connection panel Parts and buttonsDescription StandScrews Cable management Connecting the stand Connecting the SpeakersYyConnect the speaker terminals noting the correct polarity Using the Kensington security system Cable ManagementConnecting stand hole cover To install PortraitInstalling on a wall Remote Control Using the input list Using the Monitor SETConnecting to a PC Selecting an input sourceHDMI/DVI connection RGB connectionPC/MAC Hdmi connection Connecting to the LANLAN connection Customizing Settings Accessing main menusPicture settings Brightness, Color, Sharpness, Tint or ExpertTemperature ColorOriginal Just Scan169 Just Scan Original 149 Zoom Audio Audio settingsSound Mode Auto Volume Balance Speaker EnvironmentsAvailable time settings are described in the following Time settingsPower Saving TimeOption settings OptionNetwork Setup Setting Description Tile ModeFactory Reset Tile Mode 5X5 When using 25 monitorsInformation Information settingsIP Address HDMI-See p.27 AVCVBS-See DVI-See p.27 AVCVBS-See p.28 Making ConnectionsGaming device HDMI/DVI RCA-PC Avcvbs connection Troubleshooting No image is displayedKey Lock On message appears Resolution in the Control Panel Display Setting menuSignal cable that matches with the source input signal Screen image looks abnormalAudio function does not work Yy Adjust the volumeAfter-image appears on the product Yy See if the audio cable is connected properlySpecifications Width x Height Depth / Weight DimensionsApplicable only for models that support the speakers DTV Mode RGB PC supported modeHDMI/DVIPC supported mode Power IndicatorControlling the Multiple Product Connecting the cableRS-232C Configurations Communication ParameterCommand reference list FFHPosition ResetLanguage SizeTransmission Error AcknowledgementTransmission / Receiving protocol OK AcknowledgementVolume Control Command k f To adjust Volume Volume Mute Command k eReal data mapping Contrast Command k g Tint Command k j OSD Select Command k l To control OSD on/off to the setISM mode Command j p Balance Command k tAuto Configure Command j u Tile V Position Command d f To set the Vertical position Key Command m cTile Mode Command d d Change a Tile Mode Tile H Size Command d g To set the Horizontal sizeSound Mode Command d y To adjust the Sound mode Picture Mode Command d x To adjust the picture modeElapsed time return Command d l To read the elapsed time Lamp fault Check Command d p Power On Delay Command f hPosition Command f q Language Command f Power saving Command f lDPM Select Command f j Reset Command f kSize Command f s Serial no. Command f y Input Select Command x b To select input source for the SetCodeHex Function Model

47VL10 specifications

The LG Electronics 47VL10 is a powerful and versatile display solution that caters to various professional environments, such as retail spaces, corporate offices, and control rooms. With its sleek design and cutting-edge technologies, this 47-inch LCD monitor stands out as a reliable choice for businesses seeking high-quality visuals and impressive performance.

One of the key features of the LG 47VL10 is its impressive Full HD (1920 x 1080) resolution. This ensures that images and presentations are sharp, vibrant, and true to life, making it an ideal option for displaying promotional content, videos, or important information. The display utilizes LED backlighting, which not only enhances image quality with deeper blacks and brighter whites but also contributes to energy efficiency, making it an environmentally friendly choice.

The LG 47VL10 is designed with a commercial-grade panel that is built for continuous operation, allowing it to function seamlessly even in demanding settings. Its industrial design supports 24/7 operation, ensuring it remains reliable in high-traffic areas without compromising performance. This durability makes it perfect for digital signage applications, where reliability is crucial.

Another significant feature of the LG 47VL10 is its HDMI and DVI connectivity options. This flexibility allows users to connect a variety of devices, from computers to media players, ensuring ease of integration into existing systems. Furthermore, the display supports daisy chaining, which enables multiple screens to be connected in a seamless manner, allowing for stunning multi-screen presentations.

The LG 47VL10 also includes an advanced thermal management system. This technology helps maintain optimal operating temperatures, preventing overheating and ensuring long-lasting performance even in challenging conditions. The monitor is equipped with built-in speakers, providing an all-in-one solution for businesses that require audio output alongside their visual presentations.

In summary, the LG Electronics 47VL10 is an outstanding display solution that combines high resolution, durability, and versatility. With its commercial-grade features, advanced connectivity options, and robust design, it caters to the specific needs of professional environments, making it an excellent investment for businesses looking to enhance their visual communication strategies.
Top Page Image Contents