LG Electronics 47VL10 owner manual Troubleshooting, No image is displayed

Page 29

 

TROUBLESHOOTING 29

TROUBLESHOOTING

 

No image is displayed

 

 

 

 

Problem

Resolution

Is the product power cord

yy See if the power cord is properly connected to the outlet.

connected?

 

 

 

 

Is the power indicator light on?

yy See if the power switch is turned on.

 

yy May need service.

Power is on, power indicator is blue

yy Adjust brightness and contrast again.

but the screen appears extremely

yy Backlight may need repair.

dark.

 

 

The power indicator amber?

yy If the product is in power saving mode, move the mouse or press any

 

key.

 

yy Turn both devices off and then back on.

Does the 'Out of range' message

yy The signal from the PC (video card) is out of the vertical or horizontal

appear?

frequency range of the product. Adjust the frequency range by

 

 

referring to the Specifications in this manual.

 

* Maximum resolution

 

RGB : 1920 x 1080 @ 60 Hz

 

HDMI/DVI : 1920 x 1080 @ 60 Hz

Does the 'No signal' message

yy The signal cable between PC and product is not connected. Check

appear?

the signal cable.

 

 

yy Press the 'INPUT' menu in the remote Control to check the input

 

signal.

 

 

 

ENGLISH

NOTE

yyVertical frequency: To enable the user to watch the product display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz.

yyHorizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Monitor Signage Contents Licenses Assembling and Preparing AccessoriesStand Screws Speaker Optional AccessoriesCable management Cable holder Cable Tie Stand hole coverDescription Parts and buttonsScreen Buttons Screen Marks Connection panel YyConnect the speaker terminals noting the correct polarity Connecting the stand Connecting the SpeakersStandScrews Cable management Cable Management Using the Kensington security systemTo install Portrait Connecting stand hole coverInstalling on a wall Remote Control Connecting to a PC Using the Monitor SETUsing the input list Selecting an input sourcePC/MAC RGB connectionHDMI/DVI connection LAN connection Connecting to the LANHdmi connection Accessing main menus Customizing SettingsBrightness, Color, Sharpness, Tint or Expert Picture settingsColor TemperatureJust Scan Original169 Just Scan Original 149 Zoom Sound Mode Auto Volume Balance Speaker Audio settingsAudio EnvironmentsPower Saving Time settingsAvailable time settings are described in the following TimeOption Option settingsFactory Reset Setting Description Tile ModeNetwork Setup 5X5 When using 25 monitors Tile ModeIP Address Information settingsInformation Gaming device Making ConnectionsHDMI-See p.27 AVCVBS-See DVI-See p.27 AVCVBS-See p.28 HDMI/DVI RCA-PC Avcvbs connection No image is displayed TroubleshootingSignal cable that matches with the source input signal Resolution in the Control Panel Display Setting menuKey Lock On message appears Screen image looks abnormalAfter-image appears on the product Yy Adjust the volumeAudio function does not work Yy See if the audio cable is connected properlySpecifications Applicable only for models that support the speakers DimensionsWidth x Height Depth / Weight HDMI/DVIPC supported mode RGB PC supported modeDTV Mode Power IndicatorRS-232C Configurations Connecting the cableControlling the Multiple Product Communication ParameterFFH Command reference listLanguage ResetPosition SizeTransmission / Receiving protocol Error AcknowledgementTransmission OK AcknowledgementReal data mapping Volume Mute Command k eVolume Control Command k f To adjust Volume OSD Select Command k l To control OSD on/off to the set Contrast Command k g Tint Command k jAuto Configure Command j u Balance Command k tISM mode Command j p Tile Mode Command d d Change a Tile Mode Key Command m cTile V Position Command d f To set the Vertical position Tile H Size Command d g To set the Horizontal sizeElapsed time return Command d l To read the elapsed time Picture Mode Command d x To adjust the picture modeSound Mode Command d y To adjust the Sound mode Power On Delay Command f h Lamp fault Check Command d pDPM Select Command f j Language Command f Power saving Command f lPosition Command f q Reset Command f kInput Select Command x b To select input source for the Set Size Command f s Serial no. Command f yCodeHex Function Model

47VL10 specifications

The LG Electronics 47VL10 is a powerful and versatile display solution that caters to various professional environments, such as retail spaces, corporate offices, and control rooms. With its sleek design and cutting-edge technologies, this 47-inch LCD monitor stands out as a reliable choice for businesses seeking high-quality visuals and impressive performance.

One of the key features of the LG 47VL10 is its impressive Full HD (1920 x 1080) resolution. This ensures that images and presentations are sharp, vibrant, and true to life, making it an ideal option for displaying promotional content, videos, or important information. The display utilizes LED backlighting, which not only enhances image quality with deeper blacks and brighter whites but also contributes to energy efficiency, making it an environmentally friendly choice.

The LG 47VL10 is designed with a commercial-grade panel that is built for continuous operation, allowing it to function seamlessly even in demanding settings. Its industrial design supports 24/7 operation, ensuring it remains reliable in high-traffic areas without compromising performance. This durability makes it perfect for digital signage applications, where reliability is crucial.

Another significant feature of the LG 47VL10 is its HDMI and DVI connectivity options. This flexibility allows users to connect a variety of devices, from computers to media players, ensuring ease of integration into existing systems. Furthermore, the display supports daisy chaining, which enables multiple screens to be connected in a seamless manner, allowing for stunning multi-screen presentations.

The LG 47VL10 also includes an advanced thermal management system. This technology helps maintain optimal operating temperatures, preventing overheating and ensuring long-lasting performance even in challenging conditions. The monitor is equipped with built-in speakers, providing an all-in-one solution for businesses that require audio output alongside their visual presentations.

In summary, the LG Electronics 47VL10 is an outstanding display solution that combines high resolution, durability, and versatility. With its commercial-grade features, advanced connectivity options, and robust design, it caters to the specific needs of professional environments, making it an excellent investment for businesses looking to enhance their visual communication strategies.
Top Page Image Contents