LG Electronics T1910B, T1710B owner manual Touch screen does not work

Page 20

Troubleshooting

Display image is incorrect

●The screen color is mono or abnormal.

●The screen blinks.

•Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.

•Make sure the video card is properly inserted in the slot.

•Set the color setting higher than 24 bits (Color Quality) at Control Panel --> Settings.

•Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.

Touch screen does not work.

●Did you install the touch screen driver?

Install the touch screen driver on the installation CD bundled with the product.

Make sure that the USB cable for touch screen is connected to your PC.

Make sure your PC and accessories are USB-enabled.

A19

Image 20

Contents LCD Touch Monitor Important Precautions On SafetyOn Installation On Disposal On CleaningOn Repacking Accessories Thank for selecting LGE productsBasic Adjustments of the Stand Basic AdjustmentConnecting the Display Using the ComputerInstall the Driver CD provided To Use Touch ScreenOSD LOCKED/UNLOCKED Control Panel FunctionsFront Panel Controls Auto Image Adjustment Power IndicatorOn Screen Display OSD Control Adjustment Screen AdjustmentOn Screen DisplayOSD Selection and Adjustment Menu Name Button Tip Icons Sub-menus Preset Brightness Contrast GammaRED GreenClock Phase TrackingPower Reset LanguageLanguage OSDMain menu Sub menu UserTroubleshooting No image appearsDisplay image is incorrect Touch screen does not work Specifications T1710BT1910B Preset Modes Resolution IndicatorInstalling the Wall mount plate A24 Model Serial