LG Electronics RLM10, RLM20K owner manual Installation, PLC Power Line Communication Modem

Page 11

Installation

PLC (Power Line Communication) Modem

The PLC (Power Line Communication) Modem is necessary in order to use the Remote Laundry Monitor.

1.Remove the 2 Screws of the Safety Cover on the rear of the Washing Machine or Dryer. (ref. Picture 1)

2.Place the PLC Modem into position on the appliance. (ref. Picture 2)

3.Secure the modem with the 2 screws removed from the safety cover (Refer to Picture 3).

4.Locate the Washing Machine or Dryer where you want.

WARNING

Make sure that the appliance is unplugged from the power outlet before removing the safety cover and installing the modem.

Do not use excessive force when installing the PLC Modem.

Make sure the rubber gasket is in place when the modem is installed.

Tighten the two screws.

Failure to follow these instructions can damage your modem and can be dangerous for the user.

[Picture 1]

[Picture 2]

[Picture 3]

11

Image 11
Contents PLC Modem What is a Remote Laundry Monitor? Contents Always grasp the plug when you unplug the power cord Important Safety InstructionsConnecting the Power Do not cover the power cord with a rug When Using ProductsDo not install the unit in a dusty environment Do not place heavy objects on the power cordDo not operate the unit with the cover removed Do not touch the plug with wet handsUnit should not be exposed to water Never place the unit near heat sources Do not place the power cord near a heating deviceStop using the unit if smoke or strange smell occurs Install the unit by following Operating InstructionsWashing Machine and/or Dryer Safety CoverHousing ComponentsScrews Monitor Stand MonitorFront of the Monitor Rear of the Monitor Hanger HolderRear of the PLC Modem Gasket HousingPLC Modem Front of the PLC ModemPLC Power Line Communication Modem InstallationRLM Remote Laundry Monitor What is Home Code? Setting Home CodeRear Panel Home Code ClearFront Panel Home Code Clear is PROCESSING....DONE See Page 13, Setting the Home CodeMonitor Display Explanation When power is turned on, the RLM displaysWhen all of the operation is over, the RLM displays When the operation is paused, the RLM displaysCase of two products When error is occurred, the RLM displaysWhen Child Lock is set, the RLM displays Two-Phase WiringIn Your Home TroubleshootingWhen RLM doesn’t operate Page Qu’est’ -ce qu’un’ moniteur de lessive à distance ? Table des matières Connexion de l’alimentation Instructions de sécurité importantesNe pas placer d’objets lourds sur le cordon d’alimentation ServiceAu moment d’utiliser des produits Ne pas actionner l’appareil si le couvercle est enlevé Ne pas toucher la fiche avec les mains mouillées’appareil ne doit jamais être exposé à l’eau Ne jamais placer l’appareil près des sources de chaleur Vis ComposantsLaveuse et/ou sécheuse Couvercle de sécuritéAffichage DEL numérique MoniteurDevant du moniteur Dos du moniteur Support de fixationModem PL Modem PLCDevant du modem PLC Dos du modem PLCModem PLC communication de ligne d’alimentationa Déballer les pièces du moniteur Moniteur RLM moniteur de lessive à distanceBouton Réglage du code résidentielQu’est-ce qu’un code résidentiel ? Panneau arrière Effacement du code résidentielPage Pour un seul appareil Explicationdel’affichage’ dumoniteurLorsqu’une erreur survient, le moniteur affiche Pour deux appareilsLe modem de PLC pourrait provoquer le scintillement Câblage 2 phases à la résidenceGuide de dépannage Si la position de la laveuse est affichée, celle de laWarranty Memo Memo No ER3040H