LG Electronics RLM20K, RLM10 Components, Washing Machine and/or Dryer, Safety Cover, Housing

Page 8

Components

1Washing Machine (and/or) Dryer

1)Safety Cover ( )

Safety Cover :

To be removed only when installing a PLC Modem.

Screw(2)

WARNING

Do not remove the Safety Cover except when using the RLM.

Be sure to keep the Safety Cover and be careful not to lose the Gasket on the back of the Safety Cover .

When installing the Safety Cover, make sure two screws are reinstalled.

Unplug, when removing or installing Safety Cover.

Failure to follow these instructions can damage your appliance and can be dangerous for the user.

2) Housing ( )

Housing :

The PLC Modem connector is protected by a plastic Safety Cover, which must be removed to install the modem. Leave the cover in place if no modem is installed. Retain it for future use in the event the modem must be removed for repair or replacement.

WARNING

Do not touch the pins in the connector.

Do not allow any water into the Housing.

Do not use excessive force or impact on the Housing.

Failure to follow these instructions can damage your appliance

8

and can be dangerous for the user.

Image 8

Contents PLC Modem What is a Remote Laundry Monitor? Contents Always grasp the plug when you unplug the power cord Important Safety InstructionsConnecting the Power When Using Products Do not install the unit in a dusty environmentDo not place heavy objects on the power cord Do not cover the power cord with a rugDo not operate the unit with the cover removed Do not touch the plug with wet handsUnit should not be exposed to water Do not place the power cord near a heating device Stop using the unit if smoke or strange smell occursInstall the unit by following Operating Instructions Never place the unit near heat sourcesSafety Cover HousingComponents Washing Machine and/or DryerMonitor Front of the MonitorRear of the Monitor Hanger Holder Screws Monitor StandGasket Housing PLC ModemFront of the PLC Modem Rear of the PLC ModemInstallation PLC Power Line Communication ModemRLM Remote Laundry Monitor Setting Home Code What is Home Code?Rear Panel Home Code ClearFront Panel See Page 13, Setting the Home Code Home Code Clear is PROCESSING....DONEWhen power is turned on, the RLM displays When all of the operation is over, the RLM displaysWhen the operation is paused, the RLM displays Monitor Display ExplanationCase of two products When error is occurred, the RLM displaysWhen Child Lock is set, the RLM displays Two-Phase WiringIn Your Home TroubleshootingWhen RLM doesn’t operate Page Qu’est’ -ce qu’un’ moniteur de lessive à distance ? Table des matières Instructions de sécurité importantes Connexion de l’alimentationNe pas placer d’objets lourds sur le cordon d’alimentation ServiceAu moment d’utiliser des produits Ne pas actionner l’appareil si le couvercle est enlevé Ne pas toucher la fiche avec les mains mouillées’appareil ne doit jamais être exposé à l’eau Ne jamais placer l’appareil près des sources de chaleur Composants Laveuse et/ou sécheuseCouvercle de sécurité VisMoniteur Devant du moniteurDos du moniteur Support de fixation Affichage DEL numériqueModem PLC Devant du modem PLCDos du modem PLC Modem PLModem PLC communication de ligne d’alimentationa Moniteur RLM moniteur de lessive à distance Déballer les pièces du moniteurBouton Réglage du code résidentielQu’est-ce qu’un code résidentiel ? Effacement du code résidentiel Panneau arrièrePage Explicationdel’affichage’ dumoniteur Pour un seul appareilPour deux appareils Lorsqu’une erreur survient, le moniteur afficheCâblage 2 phases à la résidence Guide de dépannageSi la position de la laveuse est affichée, celle de la Le modem de PLC pourrait provoquer le scintillementWarranty Memo Memo No ER3040H