LG Electronics 23ET63V Mounting on a wall, Model, Vesa a x B 75 x Standard screw Number of screws

Page 9

8ASSEMBLING AND PREPARING

ENGLISH

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

10 cm

10 cm

10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

1Please, Use the screw and wall mount interface in accordance with VESA Standards.

2If you use screw longer than standard, the monitor might be damaged internally.

3If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.

4VESA compatible.

5Please use VESA standard as below.

yy784.8 mm (30.9 inch) and under

*Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x

Length 10 mm

yy787.4 mm (31.0 inch) and above

*Please use VESA standard wall mount pad and screws.

Model

23ET63V

VESA (A x B)

75 x 75

Standard screw

M4

Number of screws 4

CAUTION

yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.

yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.

yyUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit will include an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

yyFor more information, refer to the instructions supplied with the wall mount.

Image 9
Contents LED Monitor LED Touch Monitor Page Contents License This cable is not included UnpackingAll countries Depending on the countryParts and buttons Setting up the Monitor Moving and Lifting the MonitorMounting on a table Front Rear Mounting on a wall ModelVesa a x B 75 x Standard screw Number of screws Connecting to a PC Using the MonitorHdmi connection SUB connectionYySelf Image Setting Function USB cable-PC connection Headphone port connection YyPlease install the latest Windows service pack before useBest display mode Customizing SettingsPower Indicator Button DescriptionCustomizing Settings Menu SettingsMenu Analog Menu Next Menu Picture Description Sharpness PictureColor Temp Custom Menu Next Menu Color Description GammaHue SaturationNoise and clear or sharpen the image of characters DisplayMenu Next Description Menu Others Language AutomaticStandby Estimates Off Disables Super Energy Saving ResetPicture Mode Nothing is displayed on the screen TroubleshootingDo you see a OSD Locked message on the screen? Screen retains an imageScreen is flickering Display color is abnormalSetup and click the screen of the second Touch monitor Specifications Indicator Preset Modes ResolutionProper Posture Proper Posture for Using the MonitorDeclaration of Conformity