LG Electronics 23CAV42K owner manual Yy Subnet Mask

Page 29

Using CLOUD Solution 29

Network Tab

The Network tab allows the administrator to config- ure the portal network parameters.

NOTE

yyThe Network parameters can also be con- figured using the Webpage Administration Interface.

<Figure 2-7: Network Configuration>

yy Enable DHCP

If the Enable DHCP option is selected, a device will be connected to the DHCP server. that al- locates the IP address, subnet mask, gateway IP address, and DNS server. If this option is disabled, the above parameters must be configured manu- ally.

yy IP Address

The IP Address field contains the IP address of the device. If DHCP is disabled, this field is required. If DHCP is enabled, this field cannot be edited. This field must contain the correct IP address. If an incorrect IP address is provided, an OSD message is displayed prompting the administrator to provide the correct the IP address.

yy Subnet Mask

The Subnet Mask field contains the subnet mask of the device. If DHCP is disabled, this field is required. If DHCP is enabled, this field cannot be edited. This field must have the correct subnet mask. If an incorrect subnet mask is provided, an OSD message is displayed prompting the adminis- trator to provide the correct the subnet mask.

yy Gateway

The Gateway field contains the gateway IP ad- dress of the device. If DHCP is disabled, this field is required. If DHCP is enabled, this field cannot be edited.

yy Primary DNS Server

The Primary DNS Server field contains the primary DNS IP address of the device. This field is option- al. If DHCP is enabled, this field cannot be edited.

yy Secondary DNS Server

The Secondary DNS Server field contains the secondary DNS IP address of the device. This field is optional. If DHCP is enabled, this field cannot be edited.

yy Domain Name

The Domain Name field contains the domain name used, e.g. "domain local". This field is optional. It specifies on which domain the host or portal oper- ates.

yy FQDN

The FQDN field represents the Fully Qualified Do- main Name of the host or portal. The default value is PCoIP-host-MAC or PCoIP-portal-MAC, where MAC is the MAC address of the host or portal. If there is a domain name, it will be added to the FQDN in the format of PCoIP-host-MAC.domain. local.

NOTE

yyIn order to utilize the FQDN feature, a DNS server, configured properly with DHCP option 81, must be used.

yy Ethernet Mode

The Ethernet Mode field specifies the portal's Eth- ernet mode.

The available options are as follows. yy Auto

yy 100 Mbps Full-Duplex

yy 10 Mbps Full-Duplex

If another network device (for example, a switch) is configured to operate under 10 Mbps Full-Duplex, 100Mbps Full-Duplex or 1GbpsFull-Duplex, the administrator should always set the Ethernet Mode field to Auto; and if the device is to operate under only one speed out of multiple settings, select ei- ther 10 Mbps Full-Duplex or 100 Mbps Full-Duplex.

ENGEnglish

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Cloud Monitor Table of Contents Unpacking Power Cord Adaptor Stand Base Pin D-SUB Signal CableAssembling and Preparing Power Button Input Connectors See p.14Front Side Buttons Input Connectors See p.12 to Parts and buttonsLifting and moving the Monitor Setting Up the Monitor setAttaching the Stand Base Place the monitors screen face downDetaching the stand body Detaching the stand baseStand Body Tape Locking Pin Mounting on a tableRear Side Front Side Adjusting the angleUsing the Kensington locking device Be careful with the cables when rotating Using the Pivot functionSwivel stand Head section Stand sectionMounting on a wall Installing the wall mount plateWall Mount Plate YyThe wall mount plate is sold separatelyVesa a x B ModelStand Screw Required Screw Wall Mount Plate OptionalSelf Image Adjustment Using the Monitor SETConnecting Input Signal Cable SUB in connection PCDVI connection Connecting LAN/PeripheralsLAN connection Bottom Peripheral device connectionLeft Accessing The Main Menus Customizing SettingsSelect Exit to leave the OSD menu Front ButtonsYyCLOUD Using PC via a network Customizing SettingsMenu Settings Picture Color Display Others Volume Troubleshooting Or re-insert the PCs video card Panel Display Settings Color QualityOutput 19 Product SpecificationPower Indicator Preset ModeProper Posture Proper posture for using the monitorShows the message displayed when the network is not ready Using Cloud SolutionOSD Connect Screen Connecting OSD Options Menu Yy Subnet Mask IPv6 Tab ENGEnglish Session Tab 13 Advanced Settings for Direct to ENGEnglish Yy Auto Connect 17 Advanced Settings for View ConnectionYy View Connection Server with Auto-Logon ENGEnglish Show Error and Warning Only Shows Display when a session is disconnectedError and warning messages only User is loggedENGEnglish ENGEnglish 27 OSD Configuration 30 Event Log Yy View Event Log Message Yy Round Trip Latency Yy Session Statistics TabUnique portal serial number. yy Firmware Part Number 35 VMware View Yy Warn if the connection may be insecure De- fault37 Keyboard Yy Keyboard Repeat Delay Ary monitor Tor supports the touch screen function Yy Right Click DelayModel Serial

23CAV42K specifications

LG Electronics has long been a prominent player in the consumer electronics market, consistently pushing the boundaries of innovation and design. One of its standout products is the LG 23CAV42K, a versatile and feature-rich display ideal for various applications, from commercial settings to home use. This 23-inch digital signage monitor combines cutting-edge technologies with sleek aesthetics, making it a popular choice for businesses and individuals alike.

The LG 23CAV42K boasts a Full HD resolution of 1920 x 1080 pixels, ensuring that visuals are strikingly clear and vibrant. This high resolution is essential for applications where image quality is paramount, such as retail displays, information kiosks, and corporate signage. The monitor also features an IPS (In-Plane Switching) panel, which delivers consistent color accuracy and wide viewing angles. This technology is particularly advantageous in environments where multiple viewers are present, as it minimizes color distortion and ensures that images remain true to life from any angle.

Another critical aspect of the LG 23CAV42K is its impressive brightness and contrast ratio. With a brightness level of up to 300 cd/m², this display can perform well even in brightly lit environments. The contrast ratio enhances the depth and richness of images, making it ideal for showcasing advertisements, promotional materials, and multimedia content.

The monitor also incorporates advanced connectivity options, including HDMI, DisplayPort, and USB ports, enabling versatile integration with various systems and devices. This feature is particularly helpful for digital signage applications, where content can easily be updated and managed through different platforms. Additionally, the display supports a variety of content formats, ensuring compatibility with a wide range of media.

Designed for durability and longevity, the LG 23CAV42K is built with a robust chassis that can withstand the demands of continuous operation. Whether used as a standalone unit or in a multi-monitor setup, this display is engineered to deliver reliable performance over extended periods.

Overall, the LG 23CAV42K stands out due to its combination of advanced display technologies, excellent image quality, and user-friendly features. Whether it’s for enhancing in-store experiences, delivering information, or presenting dynamic content in corporate settings, this display monitor meets the diverse needs of today’s digital landscape, cementing LG’s reputation as a leader in the electronics industry.
Top Page Image Contents