Specifications
FIG. 50
Intermittent flow rate does not represent the maximum service flow rate used for determining the soften- ers rated capacity and efficiency. Continuous operation at flow rates greater than the service flow rate may affect capacity and efficiency performance.
OTHER SPECIFICATIONS | MODEL 38356 | MODEL 39356 |
|
|
|
Type of ion exchange material (resin) | high capacity | high capacity |
|
|
|
Amount of resin (cu. ft.) | 0.92 | 0.92 |
|
|
|
Rated Softening Capacity (Grains @ Pounds Salt Dose) | 14,200 @ 2.8 | 14,200 @ 2.8 |
| 29,900 @ 8.8 | 29,900 @ 8.8 |
| 35,600 @ 14.7 | 35,600 @ 14.7 |
|
|
|
Efficiency Rating (Grains / Pound of Salt @ Minimum Salt Dose) | 5060 @ 2.8 | 5060 @ 2.8 |
|
|
|
Rated Service Flow Rate (gpm) | 8.0 | 8.0 |
|
|
|
Pressure Drop at Rated Service Flow Rate (psi) | 14 | 14 |
|
|
|
Intermittent Flow Rate @ 15 psi (gpm) | 8.5 | 8.5 |
|
|
|
Max. Drain Flow Rate (gpm) | 2.0 | 2.0 |
|
|
|
These systems conform to NSF / ANSI 44 for the specific performance claims as verified and substantiat- ed by test data.
The efficiency rating is only valid at the minimum stated salt dosage. These softeners were efficiency rated acocording to NSF / ANSI Standard 44.
Questions? Call The Kenmore Water Line
34
