LG Electronics W2600HP manual Troubleshooting, Is the power cord of the display connected?

Page 19

Troubleshooting

Check the following before calling for service.

No image appears

●Is the power cord of the display connected?

●Is the power indicator light on?

●Is the power on and the power indicator blue or green?

●Is the power indicator amber?

●Do you see an "OUT OF RANGE" message on the screen?

●Do you see a "CHECK SIGNAL CABLE" message on the screen?

•Check and see if the power cord is connected properly to the power outlet.

•Touch the Power button.

•Adjust the brightness and the contrast.

•If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.

•Try to turn on the PC.

•This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.

•This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.

Do you see a "OSD LOCKED" message on the screen?

●Do you see “OSD LOCKED” when you push MENU button?

•You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message

“OSD UNLOCKED” will appear.

A18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents W2600H W2600HP On Safety Important PrecautionsOn Disposal On InstallationOn Cleaning On RepackingConnecting the stand base or Removing the stand base Connecting the DisplayScrew Turn the screw by using the screw handle Ergonomic Positioning your displayPower Cord 2 1 Signal Cable Using the ComputerUSB downstream Port x Connecting the USBUniversal Serial Bus CableTo arrange the cables Menu Button Control Panel FunctionsFront Panel Controls ZoomingSource Hot key Auto Image AdjustmentPower Indicator ButtonsScreen Adjustment On Screen Display OSD Control AdjustmentMain menu Sub-menu Reference On Screen DisplayOSD Selection and AdjustmentTouch the Menu Button, then the main menu of the OSD appears Green PresetContrast Gamma REDPosition OSD PowerIndicator Reset LanguageUser MovieText SETIs the power cord of the display connected? TroubleshootingDo you see OSD Locked when you push Menu button? Display image is incorrect Screen color is mono or abnormal Screen blinksDisplay SpecificationsUSB Indicator Preset Modes ResolutionWall mount plateSeparate purchase Installing the Wall mount plateKensington Security Slot Digitally yours
Top Page Image Contents