LG Electronics W2600HP manual Using the Computer, Power Cord 2 1 Signal Cable

Connecting the Display

Using the Computer

1. Make sure to turn off the computer and product.

Connect signal cable 1 and power cord 2 in order, then tighten the screw of the signal cable.

AConnect D-sub Cable (PC)

BConnect D-sub Cable (Mac)

CConnect DVI-D Cable

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

Power Cord 2 1 Signal Cable

Varies according to model.

Wall-outlet type

PC

MAC

PC

DVI-D(This feature is not available in all countries.)

Mac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

2. Touch the power button on the front of panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode)

NOTE

Power button

'Self Image Setting Function'? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. 'AUTO/SET Function'? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, touch the AUTO/SET function button to improve resolution.

A6