LG Electronics MT-50PZ40/, MT-50PZ41/, MT-50PZ43/, MZ-50PZ42/, MZ-50PZ43 owner manual PIP Function

PIP Function

-PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other source will show a smaller inset image.

-When you select RGB1 or RGB2 for main picture in PIP, you can watch video (AV1 or AV2), S-Video or Component 480i for sub picture.

ENGLISH

Watching PIP

Press the PIP button to switch on the sub pictures.

• Press this button again to switch it off.

PIP Aspect Ratio

Press the PIP ARC button.

• The sub picture appears as below.

Moving the PIP

Press the WIN.POSITION button.

Repeatedly press the D / E or F / G button until desired position is achieved. The sub picture moves up/down or left/right.

Swapping the PIP

Press the SWAP button to exchange the main and sub pic- tures.

Win. Position

D

F G

E

Main Picture Size Adjustment

Press the ZOOM+/ZOOM- button to enlarge or reduce the main picture size when viewing the PIP.

Zoom In

100 %

D

F G

E

PIP Size

Press the WIN.SIZE button and then F / G button to adjust the sub picture size.

With WIN.SIZE button in twin picture mode, main and sub picture is adjusted simultaneously. With WIN.SIZE button in PIP mode, sub picture is adjusted.

Selecting a source input signal for the PIP

Press the SUB INPUT button to select the input mode for the sub picture.

•In RGB1 and RGB2 for main picture, you can select COMPO- NENT 480i, VIDEO (AV1 or AV2) and S-VIDEO for sub picture.

•In VIDEO (AV1 or AV2) and S-VIDEO for main picture, you can select COMPONENT 480p/720p/1080i, RGB1 and RGB2 for sub picture.

•In COMPONENT 480p/720p/1080i for main picture, you can select VIDEO (AV1 or AV2) and S-VIDEO for sub picture.

•In COMPONENT 480i for main picture, you can select RGB1 and RGB2 for sub picture.

Main Picture Position Adjustment

Press the ZOOM+/ZOOM- button. Adjust the main picture posi-

tion with the D / E or F / G buttons in enlarged main picture.

Zoom In

100 %

D

F G

E