LG Electronics W2284F manual Auto Image Adjustment

Control Panel Functions

Control		Function
Buttons		Use these buttons to select or adjust functions in the On
		Screen Display.
Button		For more information, refer to page A16.
(	)

Button

(SOURCE)

Use this button to make either D-Sub or DVI connector active. This feature is used when two computers are connected to the display. The default setting is D-Sub.

AUTO/SET Button

Use this button to select an icon in the On Screen Display.

AUTO IMAGE ADJUSTMENT

When adjusting your display settings, always press the AUTO/SET button prior to entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).

The best display mode is: 1680 x 1050

Power Button	Use this button to turn the display on or off.
Power Indicator	This Indicator lights up as blue when the display is
	operating normally(On Mode). If the display is in
	Sleep Mode (Energy Saving), this indicator color
	changes to blue LED blinking state.

A7