6ASSEMBLING AND PREPARING
ENGLISH
Mounting on a table
1Lift the monitor and place it on the table in an upright position.
Install at least 10 cm away from the wall to ensure sufficient ventilation.
10 cm
10 cm
10 cm
10 cm
WARNING
When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.
Do not touch or press the screen when adjusting the angle of the monitor.
2Connect the Power cord to the monitor, then plug the power cord into the wall outlet.
Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.
NOTE
Tilt from +20 to
3 Press the (Power) button on the front of the monitor to turn on the monitor.
CAUTION
y yUnplug the power cord prior to moving or installing the monitor. There is risk of electric shock.
Front Rear