LG Electronics 19MB35DB Mounting on a wall, Modeli, Vesa a x B, Vidë standarde Numri i vidave

Page 9

8ASSEMBLING AND PREPARING

ENGLISH

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

Modeli

19MB35D

22MB35D

 

 

24MB35D

VESA (A x B)

75 x 75

100 x 100

Vidë standarde

M4

M4

Numri i vidave

4

4

10 cm

10 cm

10 cm

10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

1Please, Use the screw and wall mount interface in accordance with VESA Standards.

2If you use screw longer than standard, the monitor might be damaged internally.

3If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it.

4VESA compatible.

5Please use VESA standard as below.

y y784.8 mm (30.9 inch) and under

*Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.7 mm x

Length 10 mm

y y787.4 mm (31.0 inch) and above

*Please use VESA standard wall mount pad and screws.

CAUTION

y yDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

y yIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.

y yUse only an authorized LG wall mount and contact the local dealer or qualified personnel.

y yDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.

y yUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

y yUse the screws that are listed on the VESA standard screw specifications.

y yThe wall mount kit will include an installation manual and necessary parts.

y yThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

y yThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

y yFor more information, refer to the instructions supplied with the wall mount.

Image 9
Contents IPS LED Monitor LED LCD Monitor Page Contents Assembling and Preparing Power Cord Stand Body Stand BaseUnpacking SUB Cable DVI-D CableParts and buttons Power Indicator Attaching the Stand Base Setting up the Monitor set Detaching the Stand Base Stand Body Stand BaseMounting on a table Using the Kensington locking device Modeli Mounting on a wallVesa a x B Vidë standarde Numri i vidaveConnecting to a PC Using the Monitor SETSUB connection DVI-D connection‘AUTO’ Function YSelf Image Setting FunctionBest display mode 19MB35D1280 x 1024 22MB35D/24MB35D1920 x Customizing SettingsPower Indicator Monitor set ButtonsMenu Settings Customizing SettingsPicture Menu Next Menu Color Description Gamma Color ResetColor Temp Custom Six ColorNoise and clear or sharpen the image of characters Display~ 24 hours OthersReader Mode Description Reader SettingReader Reader OffDisplay the Super Energy Saving OSD Off Disables Super Energy SavingHigh LowCheck Control Panel Display Settings and adjust the display TroubleshootingNo image appears Do you see a OSD Locked message on the screen?Recommend resolution Settings19MB35D Specifications22MB35D 24MB35D Indicator Preset Modes ResolutionMode LED Color Horizontal Vertical PolarityH/V FrequencykHz FrequencyHzProper Posture Proper posture for using the Monitor setDeclaration of Conformity