PLUS Vision V-1100Z user manual White, Color System, Color Space

Color

White

When projecting, this function is used to emphasize the whites of text or diagrams on the personal computer.

Select item name “White” and select the setting contents with the cursor ( ) buttons.

Select the desired degree of white from among “Low”, “Medium”, and “High”.

Quick Color Adj.	Custom
Gamma	Normal
Color Temp.	Normal
White	High

Color System

This function sets the color system of the video signal. Normally, this should be set to Auto. Set this function when the system cannot be identified with Auto.

Select item name "Color System" and select the setting contents with the cursor ( ) buttons.

Auto	Automatic identification
NTSC	Fixes the setting to NTSC
PAL	Fixes the setting to PAL
SECAM	Fixes the setting to SECAM

Quick Color Adj.	Standard
Gamma	Normal
Color Temp.	Normal
White	High
Color System	Auto

Color Space

Set this function when a component signal (YCbCr or YPbPr) is projected and the image is extremely red or extremely green.

Select the item name "Color Space" and use the cursor ( ) buttons to select a color space setting that provides a normal im- age.

Selection contents at the time of YCbCr input

YCbCr601, YCbCr709, YCbCrSMPT

Selection contents at the time of YPbPr input

YPbPr601, YPbPr709, YPbPrSMPT

Quick Color Adj.	Standard
Gamma	Normal
Color Temp.	Normal
White	High
Color System	Auto
Color Space	YCbCr601
Quick Color Adj.	Standard
Gamma	Normal
Color Temp.	Normal
White	High
Color Space	YPbPr601

Note

*When the component signal undergoes conversion processing to red, green, and blue which express the image of the projector, the correct color cannot be reproduced unless a system compliant with the color difference conversion system of the input signal is used. Color Space serves to make this selection.

E-50