PLUS Vision V-1080, V-807 Finishing, Power Cable Connections and Switching the Power On/Off

Page 25

Power Cable Connections and Switching the Power On/Off

Finishing

1

2

Switch off the power of the connected equipment

Switch off the power of the projector

Main unit operation: Press and hold the POWER button for a while.

Remote control operation: Press the POWER OFF button.

ON POWER OFF

The "Power Off" indication will appear.

When the red bar extends fully (in about 5 sec-

Power Off

onds), the projection screen will go off and the

OK ?

unit will enter the power off operation.

Note

* The operation can be cancelled by pressing a but-

Power Off

ton other than the POWER button.

* One more press of the POWER (POWER OFF)

OK ?

button will switch off the power.

The POWER indicator changes to flashing am-

STATUS POWER

STATUS POWER

STATUS POWER

ber and lights a steady amber after about 60 sec-

onds (when the unit enters the standby mode).

Flashes amber

Lit amber

(Approximately 60

Standby

3 Unplug the power cable

POWER

seconds)

mode

Check that the POWER indicator is lit in amber and then unplug the power cable.

The POWER indicator will go off when the power cable is unplugged.

Warrning

Under normal circumstances, please do not unplug the power cable unless the POWER indicator is lit in amber. Doing so may shorten the life of the lamp or result in breakdown of the projector.

Do not unplug the power cable while the POWER indicator is flashing amber. Doing so may shorten the life of the lamp or damage the projector.

E-25

Image 25

Contents 1080/V-807 Precautions Important Safety InformationPower Supply InstallationCleaning Lamp ReplacementCarrying around Fire and Shock PrecautionsSharp, clear picture Major FeaturesBeautiful reproduction of high-quality images from DVD Heightened effectiveness with picture in pictureTable of Contents Table of Contents Adjustments and SettingsMenu Operations MiscellaneousRemote control Includes one button battery Checking the Supplied AccessoriesPower cable 1.8 m / 5.9 feet RGB signal cable Mini D-sub 15-pin, 2 m / 6.6 feetAccessories Projector Checking the Supplied AccessoriesNames of the Main Unit Parts Built-in Security Slot PC connector E-18,19,22Names of the Main Unit Parts Audio jack E-23 Video jack E-21Infrared transmitter E-14 Power button E-24Freeze button E-31 Mute button E-31Button Battery Replacement Preparing the Remote ControlUsing the remote control for the first time Replacement MethodPreparing the Remote Control Remote Control RangeSide View Top ViewFocusing Connecting the power cable and switching on the powerAdjust the screen or video image Position the projectorScreen Size and Projection Distance Placement GuideHeight ScreenFeet Placement GuideProjection Distance 200 063.05 13.3210.00 21.72Personal Computers with a DVI Connector Connections with PC ConnectorsMonitor output Monitor output RGB signal cable Supplied item Personal Computers with a Mini D-Sub 15-Pin ConnectorPersonal computer Connecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook ComputerManufacturer Model Key Video Equipment with Video Connectors Connections with Video ConnectorsVideo Equipment with S-VIDEO Connectors Video cable Suppled item Video cable Supplied item When the Video Connectors are Y, Cb, and Cr Connectors Connections with Component Signals When the Video Connectors are Y, Pb, and Pr Connectors Component cable Available as an optionVideo equipment, personal computer Connections with Audio ConnectorsWhite Red Audio cable Supplied itemRemote control operation Press the Power on button Switch on the projector powerOperating Lit amber To wall outlet Firmly plug in all the wayUnplug the power cable Power Cable Connections and Switching the Power On/OffFinishing Projection Screen Position Adjustment Adjustment of the Projection ScreenAdjust the projection image to the screen Making Adjustments with the Adjusters Focus AdjustmentAdjustment of the Projection Screen Raising the projection imageWhen Auto Source is Off When Auto Source is OnGeneral Operation Input SelectionMain unit operation/Remote control operation Press Automatic Adjustment of Analog RGBGeneral Operation Selection of Aspect Ratio Projects the input signal without pixel conversionFull screen in a ratio Mum displayable sizeProjecting a Sub-Picture Cancelling Video and Audio TemporarilyFreezing a Moving Picture Sub-picture Main-pictureRemote control operation Using the Quick MenuContent of Adjustments and Settings Correcting Keystone Distortion of the Projection Screen Adjustment MethodStraight on beforehand While viewing the screen, press the + button or the butImage can also be moved in the following circumstances Enlargement of the Image and Video MovementNo enlargement Approximately 2 times enlargement Movement Press the VOL button Volume adjustment display will appear Adjustment of the VolumeNames and Functions of the Parts Menu Operation MethodMenu Operation Method Names and Functions of Menu Screen PartsMenu Display Press the Menu button to display the menu Performing Menu OperationsThis condition allows selection of the item name Cursor Dark blueWhen Icon is displayed and depend Stone example of the description diagramWhen a button is pressed, the image will also change Displays Icon. The sub menu will bePress of the Menu button while CursorCursor is not displayed will close the menu DisplayWhen a sub menu is displayed, press the can Selecting Another Menu Name with Remote Control OperationPress the Cancel button again and cancel CEL button and close the sub menuMenu Name Item Name Input SignalName ImageSub Menu Item Status Factory Default Lamp Timer Reset Resolution FrequencyBrightness / Contrast / Color / Tint / Sharpness PictureItem Name Cursor Button Cursor Button Picture Adj. / Fine Picture / H Position / V Position Picture Adj. Picture AdjustmentFine Picture PictureAdjustment/setting value of the Image menu name ResetPress of the cursor button forces the reset PositionGamma ColorColor Temp Corrects for natural color tonesSelection contents at the time of YPbPr input Selection contents at the time of YCbCr inputColor System Color SpaceVideo Signals Personal Computer SignalView AspectProjection FilterView Horizontal keystone the dotted screen outline KeystonePosition Settings Size SettingsPicture in Picture Keystone SaveLanguage SetupAuto Source Setup Auto Power OffOperation when Function is On On ScreenYPbPr Menu PositionBackground This function sets the display position of the menuWhite Balance Lamp Timer Reset Factory DefaultInfo StatusLamp Timer Resolution / FrequencyThis function displays the lamp timer InfoTemperature has become abnormally high When the Status Indicator is Lit/FlashesLamp will not light up Fan is stoppedIt is timer to replace the lamp When the Status Indicator is Lit/FlashesLamps service life has ended Thermal ProtectorCheck the following matters before requesting servicing TroubleshootingTroubleshooting Cleaning a Soiled Projector Main Unit CleaningCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeInstall the lamp cover Install the new lamp cartridgeReset the lamp timer to zero Optical SpecificationsElectrical MechanicalTable of Supported Frequency Signal ResolutionDigital Analog KHz 1080 141 Cabinet DimensionsUnit mm inch 180