PLUS Vision V-807, V-1080 user manual Replacing the Lamp Cartridge

Page 66

Replacing the Lamp Cartridge

The lamp as a light source used in the unit has a lifespan. The rated lamp life is about 1,000 hours. The rated lamp life is the average life of the lamps produced and tested (under the test conditions of our company) for a long term, however, it may become shorter depending on the conditions of usage.

After the lamp has been operating for 1000 hours or longer, the STATUS indicator will light and total lamp usage will be displayed on the screen.

The unit will not turn on after 1100 hours. When this happens, replace the lamp cartridge with a new one. Follow the procedures below for replacement.

The rated lamp life is about 1,000 hours. The rated lamp life is the average life of the lamps produced and tested (under the test conditions of our company) for a long term, however, it may become shorter de- pending on the conditions of usage.

After the lamp has been operating for 1000 hours or longer, the STATUS indicator on the control panel will light and the “LAMP USAGE” icon which shows hours of total lamp usage will be displayed on the screen.

When this happens, turn off the unit and replace the lamp cartridge with a new one. The unit will not turn on after 1100 hours. (It will go off if it is in use.)

CAUTION

•DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Allow at least one hour for the lamp to cool before handling.

•DO NOT LOOSEN ANY SCREWS except for those men-tioned in the instructions below. There is danger of electric shock.

CAUTION

Do not use a lamp cartridge other than the PLUS replacement lamp cartridge. Order this from your PLUS dealer using the unit model number (see “Note” below).

Note

•When the lamp usage time reaches 1100 hours, it becomes impossible to switch on the power and menus are not displayed. In such a case, see “If the unit doesn’t go on because lamp usage exceeds 1100 hours” on page 25.

•Obtain a replacement lamp cartridge at the store where the unit was purchased. Please specify the following information when ordering a replacement lamp cartridge:

Model name : V-120

Product code : 28-060

E-66

Image 66

Contents 1080/V-807 Important Safety Information PrecautionsCleaning InstallationPower Supply Lamp ReplacementFire and Shock Precautions Carrying aroundBeautiful reproduction of high-quality images from DVD Major FeaturesSharp, clear picture Heightened effectiveness with picture in pictureTable of Contents Menu Operations Adjustments and SettingsTable of Contents MiscellaneousPower cable 1.8 m / 5.9 feet Checking the Supplied AccessoriesRemote control Includes one button battery RGB signal cable Mini D-sub 15-pin, 2 m / 6.6 feetChecking the Supplied Accessories Accessories ProjectorNames of the Main Unit Parts Names of the Main Unit Parts PC connector E-18,19,22Built-in Security Slot Audio jack E-23 Video jack E-21Freeze button E-31 Power button E-24Infrared transmitter E-14 Mute button E-31Using the remote control for the first time Preparing the Remote ControlButton Battery Replacement Replacement MethodSide View Remote Control RangePreparing the Remote Control Top ViewAdjust the screen or video image Connecting the power cable and switching on the powerFocusing Position the projectorHeight Placement GuideScreen Size and Projection Distance ScreenProjection Distance Placement GuideFeet 200 063.05 13.3210.00 21.72Connections with PC Connectors Personal Computers with a DVI ConnectorMonitor output Personal Computers with a Mini D-Sub 15-Pin Connector Monitor output RGB signal cable Supplied itemPersonal computer To Output the External Output Signal of a Notebook Computer Connecting Personal Computers and Video EquipmentManufacturer Model Key Video Equipment with S-VIDEO Connectors Connections with Video ConnectorsVideo Equipment with Video Connectors Video cable Suppled item Video cable Supplied itemWhen the Video Connectors are Y, Pb, and Pr Connectors Connections with Component SignalsWhen the Video Connectors are Y, Cb, and Cr Connectors Component cable Available as an optionWhite Red Connections with Audio ConnectorsVideo equipment, personal computer Audio cable Supplied itemOperating Switch on the projector powerRemote control operation Press the Power on button Lit amber To wall outlet Firmly plug in all the wayPower Cable Connections and Switching the Power On/Off Unplug the power cableFinishing Adjustment of the Projection Screen Projection Screen Position AdjustmentAdjust the projection image to the screen Adjustment of the Projection Screen Focus AdjustmentMaking Adjustments with the Adjusters Raising the projection imageGeneral Operation When Auto Source is OnWhen Auto Source is Off Input SelectionAutomatic Adjustment of Analog RGB Main unit operation/Remote control operation PressGeneral Operation Full screen in a ratio Projects the input signal without pixel conversionSelection of Aspect Ratio Mum displayable sizeFreezing a Moving Picture Cancelling Video and Audio TemporarilyProjecting a Sub-Picture Sub-picture Main-pictureUsing the Quick Menu Remote control operationContent of Adjustments and Settings Straight on beforehand Adjustment MethodCorrecting Keystone Distortion of the Projection Screen While viewing the screen, press the + button or the butEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesNo enlargement Approximately 2 times enlargement Movement Adjustment of the Volume Press the VOL button Volume adjustment display will appearMenu Operation Method Names and Functions of the PartsNames and Functions of Menu Screen Parts Menu Operation MethodPerforming Menu Operations Menu Display Press the Menu button to display the menuCursor Dark blue This condition allows selection of the item nameWhen a button is pressed, the image will also change Stone example of the description diagramWhen Icon is displayed and depend Displays Icon. The sub menu will beCursor is not displayed will close the menu CursorPress of the Menu button while DisplayPress the Cancel button again and cancel Selecting Another Menu Name with Remote Control OperationWhen a sub menu is displayed, press the can CEL button and close the sub menuName Input SignalMenu Name Item Name ImageStatus Factory Default Lamp Timer Reset Resolution Frequency Sub Menu ItemPicture Brightness / Contrast / Color / Tint / SharpnessItem Name Cursor Button Cursor Button Fine Picture Picture Adj. Picture AdjustmentPicture Adj. / Fine Picture / H Position / V Position PicturePress of the cursor button forces the reset ResetAdjustment/setting value of the Image menu name PositionColor Temp ColorGamma Corrects for natural color tonesColor System Selection contents at the time of YCbCr inputSelection contents at the time of YPbPr input Color SpaceView Personal Computer SignalVideo Signals AspectFilter ProjectionView Keystone Horizontal keystone the dotted screen outlinePicture in Picture Size SettingsPosition Settings Keystone SaveSetup LanguageAuto Source Operation when Function is On Auto Power OffSetup On ScreenBackground Menu PositionYPbPr This function sets the display position of the menuWhite Balance Info Factory DefaultLamp Timer Reset StatusThis function displays the lamp timer Resolution / FrequencyLamp Timer InfoLamp will not light up When the Status Indicator is Lit/FlashesTemperature has become abnormally high Fan is stoppedLamps service life has ended When the Status Indicator is Lit/FlashesIt is timer to replace the lamp Thermal ProtectorTroubleshooting Check the following matters before requesting servicingTroubleshooting Cleaning the Inside of the Projector CleaningCleaning a Soiled Projector Main Unit Dirty LensReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeInstall the new lamp cartridge Install the lamp coverReset the lamp timer to zero Electrical SpecificationsOptical MechanicalSignal Resolution Table of Supported FrequencyDigital Analog KHz 1080 Cabinet Dimensions 141Unit mm inch 180