Mitsubishi Electronics HC6800 Viewing video images continued, Connecting to a video player, etc

Page 15

Viewing video images (continued)

Viewing video images (continued)

Connecting to a video player, etc.

Video player, or the like

Video cable (option)

1 To VIDEO	2	To video output
1 To VIDEO		terminal
IN terminal

S-video cable (option)		Video player, or the like
S-video cable (option)
1	2	To S-video
1	To S-VIDEO	output terminal
	IN terminal

1.Connect one end of the optional video cable to the VIDEO IN terminal of the projector.

2.Connect the other end of the video cable to the video output terminal of the video equipment.

When the video equipment is equipped with the S-video output terminal, make the connection as follows:

1.Connect one end of the optional S-video cable to the S-VIDEO IN terminal of the projector.

2.Connect the other end of the S-video cable to the S- video output terminal of the video equipment.

•Also read the instruction manual of the equipment to be connected.

•Contact your dealer for details of connection.

When a TV tuner or VCR is connected:

When you use this projector with a TV tuner or VCR connected, no image may appear or a message of NO SIGNAL may appear on the screen when you change the channel via any channel that is not being received. In such a case, set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its channel skip function (that is a function not to display channels that are not being received) enabled.

Connecting to a DVD player or HDTV decoder

To connect this projector to video equipment that has component video output terminals, such as a DVD player, use the COMPONENT VIDEO IN terminals.

Component cable (option)

Y

Y

PR/CR

PB/CB

PR/CR PB/CB Y

DVD player or HDTV decoder

•The terminal’s names Y, PB, and PR are given as examples of when a HDTV decoder is connected.

•The terminal’s names vary depending on the connected devices.

•Images may not be projected correctly depending on the type of the DVD player you use.

•Though it may take some time before an image is displayed on the screen depending on the type of the input signal, such symptom is not a malfunction.

•When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu.

EN-15

Image 15

Contents LCD PROJECTOR MODELHC6800 HC6800CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK NO USER-SERVICEABLE PARTS INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL THE PROJECTOR IS IN THE POWER ON MODETrademark, Registered trademark ContentsEN-4 Important safeguardsDo not unplug the power cord during operation Important safeguards continuedDo not keep using the damaged projector Do not look into the lens when it is operatingChecking accessories Inserting the batteries into the remote controlPreparing your projector Attaching the lens cap Indicator areaPreparing your projector continued OverviewAdjustment feet Remote controlUsing the picture quality adjusting buttons Bottom sideFront of projector Using the remote controlOperational range of the remote control Reception angleScreen size and projection distance Setting up your projectorSetting up the screen When the aspect ratio of the screen isWhen the aspect ratio of the image is Setting up your projector continuedWhen the aspect ratio of the screen is 2.351 CinemaScope Screen size and projection distance continuedCorrecting skewed or distorted image Adjusting the position of the projected imageWhen fine streaks are seen on projected images When projected images are distorted to a trapezoidFront projection, ceiling mounting TRIGGER terminalRear projection Preparation A. Connecting the projector to video equipmentViewing video images Basic home theater system connectionWhen a TV tuner or VCR is connected Connecting to a video player, etcConnecting to a DVD player or HDTV decoder Viewing video images continuedConnecting to video equipment having a HDMI terminal EN-16Connection for video equipment having an HDMI terminal EN-17 B. Plugging in the power cordEN-18 C. Projecting imagesEN-19 To stop projectingEN-20 Setting the aspect ratioHow to change the settings With the remote controlWith the FEATURE menu See page 26 for menu setting About DDC A. Connecting the projector to a computerB. Plugging the power cord Viewing computer imagesViewing computer images continued Example of the setting procedure for external output When connecting to a notebook computerSetting of the resolution AUTO POSITION buttonEN-25 Menu operation1. IMAGE menu How to set the menusAvailable settings in the menus Menu operation continuedEN-27 2. INSTALLATION menuEN-28 3. FEATURE menu4. SIGNAL menu EN-295. USER menu 6. INFORMATION menu AV memoryTo store the settings To enable the stored image quality settingsTo sharpen or soften the projected image SHARPNESS Adjusting projected imagesTo adjust the brightness CONTRAST and BRIGHTNESS To adjust the color COLOR and TINTAbout color temperature Adjusting projected images continuedTo adjust the tone of white COLOR TEMP To adjust the tone of white To customize the color temperatureTRNR temporal recursive noise reduction To adjust the ratio of change in brightness GAMMA MODENoise reduction To enable the stored gamma modeTo adjust the horizontal position How to adjust the image supplied from the computer using the menuLPF Progressive filter Simple method to adjust the image positionTo cancel the password function Advanced featuresPassword function To enable the password functionReplacing the lamp Interval of lamp replacementReplacing the lamp continued To replace the lampReset of the lamp operation time EN-38 When removing the lamp from the ceiling-mounted projectorFor the air-filter white Cleaning of the projector and the ventilation slotsCleaning of the lens EN-39EN-40 TroubleshootingProblem SolutionTroubleshooting continued No image appears on the screen. continuedImages are not displayed correctly Others Images are not displayed correctly. continuedIndicators Normal conditionAbnormal condition Dimension drawings unit mm SpecificationsSpecifications continued Specification of RGB signals in each computer mode of the projectorEN-45 Connectors Replacement part option/not included in the boxEN-46 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan MITSUBISHI ELECTRIC CORPORATION