Replacing the lamp (continued)
When removing the lamp from the ceiling-mounted projector
When removing the lamp from the
•Assemble the lamp replacement tray according to the procedure shown on it.
1.Follow steps 1 to 5 on page 37.
2.Attach the lamp replacement tray to the projector as shown in the figure.
3.Secure the lamp replacement tray on the projector using the tape
packed with the tray. | Tape |
4. Pull out the lamp box by the handle while holding the projector.
•Hold the lamp replacement tray to prevent glass fragments from scattering.
•Don’t put the lamp directly on the lamp replacement tray because it may fall.
5.Detach the lamp replacement tray together with the removed lamp.
6.Follow steps 7 to 13 on page 37.