Mitsubishi Electronics XL9U Preparation for projection, Adjustment of the projection angle

Page 12

Preparation

Preparation for projection

1.Attach the provided power cord to the projector.

2.Plug the power cord in the wall outlet.

3.Remove the lens cap.

Warning:

¥Do not look into the lens directly when the projector is on.

¥The lens cap is for protecting the lens. If you leave the lens cap on the lens with the projector turned on, it may be deformed because of heat build-up. Remove the lens cap when you turn on the projector.

¥The power cords for use in the U.S. and Europe are provided with this projector. Use the appropriate cord for your country.

¥This projector uses the power plug of three-pin grounding type. Do not remove the grounding pin from the power plug. If the power plug doesnÕt fit your wall outlet, ask an electrician to change the wall outlet.

¥The provided power cord for the U.S. is rated at 120 V. Never connect this cord to any outlet or power supply using other voltages or frequencies than rated. If you want to use a power supply using other voltage than rated, prepare an appropriate power cord separately.

¥Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.

¥Do not place any objects on the power cord or do not place the projector near heat sources to prevent damage to the power cord. If the power cord should be damaged, contact your dealer for replacement because it may cause fire or electric shock.

¥Do not modify or alter the power cord. If the power cord is modified or altered, it may cause fire or electric shock.

Caution:

¥Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord.

¥Do not plug in or out the power cord with your hand wet. It may cause electric shock.

Adjustment of the projection angle

For the best projection, project images on a flat screen installed at 90 degrees to the floor. If necessary, tilt the projector using the two adjustment feet on the bottom of the projector.

Important:

¥Install the screen on a flat wall at 90 degrees to the floor.

¥Slanting the projector more than ±10û (horizontally) or ±30û (vertically) may cause trouble or explosion of the lamp. You can tilt the projector up to 7 degrees using the adjustment feet only.

¥Images may not be projected in a shape of a regular rectangle or with its aspect ratio 4:3, depending on the installation conditions of the projector and the screen.

¥To correct vertical keystone distortion, press the KEYSTONE button on the projector or the remote

control to display KEYSTONE, and adjust the image by pressing the } or { button (or VOLUME + or - button on the remote control).

In the following cases:

Press the }

Press the {

(or -) button.

(or +) button.

Important:

¥When the keystone adjustment is carried out, the adjustment value is indicated. Note that this value doesnÕt mean a projection angle.

¥The allowable range of the adjustment value in the keystone adjustment varies depending on the installation conditions.

¥When the keystone adjustment takes effect, the resolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns. They are not due to product malfunctions.

¥Noise may appear on the screen during the keystone adjustment because of the type of the video signal being projected and the setting values of the keystone adjustment. In such cases, set the keystone adjustment values in the range where the image is displayed without noise.

¥When the keystone adjustment is carried out, the image may not be displayed correctly because of the type of input signal.

¥When the 1080i signal is input, the keystone adjustment ranges are limited.

Adjustment feet

Screen

1.Tilt up the project to the appropriate angle.

2.Press the foot adjustment buttons next to the adjustment feet, and the adjustment feet will come out.

3.Release the buttons to lock the adjustment feet to that position.

4.Rotate the adjustment feet for fine adjustment.

After using the projector:

5.Put the adjustment feet back into the projector by pressing the foot adjustment buttons.

EN Ð 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents XL9U When using the projector in Europe Compliance NoticeContents Important safeguards Do not keep using the damaged projector Do not look into the lens when the projector is operatingDo not unplug the power cord during operation Clean the air-filter once a monthOverview Control panelTerminal panel Remote control Bottom sideRemote control Battery installationOperation range of the remote control Reception angle verticalInstallation Layout of the projectorFront projection Front projection, ceiling mountingBasic connections Projector + AV deviceProjector + DVD player or Hdtv decoder VCR, etcProjector + Computer For MacintoshComputer About DDCAdjustment of the projection angle PreparationPreparation for projection Following casesPower-on Basic operationBasic operation Installation Menu operationBasic operation Menu operation Expand Mode .. Choose the mode for enlarging the image. See Terminal when Video is chosen as the source. SelectComputer Video mode to always output the audio that is Activated when a film source signal is input. When OFF isImage adjustment Image adjustmentColor temperature About color temperatureAdjustment of the image from the computer Simple adjustment methodAdvanced features ExpandStill Setting of the image displayed during startup or muting Setting procedureSet the background color Set the image sizeAdvanced features Password functionTo cancel the password function To enable the password functionLamp replacement Reset of the lamp operation timeInterval of lamp replacement Maintenance Cleaning of the air-filterCleaning of the projector and the ventilation slots Cleaning of the lensTroubleshooting Images arent projected on the screenTroubleshooting Images arent projected correctlyOthers Indicators Power StatusNormal condition Abnormal conditionSpecifications Kensington LockSpecifications ConnectorsDimensional drawings unit mm Replacement part Option / Not included in the boxCGA70 Mitsubishi Electric Corporation

XL9U specifications

The Mitsubishi Electronics XL9U is a cutting-edge air conditioning solution designed for optimal climate control in residential and commercial spaces. This model stands out in the competitive HVAC market primarily due to its impressive blend of energy efficiency, advanced technology, and user-friendly features.

One of the main features of the XL9U is its Energy Efficiency Rating (EER) and Seasonal Energy Efficiency Ratio (SEER), which significantly surpasses many traditional air conditioning units. This high efficiency not only reduces electricity bills but also minimizes environmental impact, aligning with Mitsubishi's commitment to sustainability. The XL9U utilizes inverter technology, allowing the compressor to adjust its speed according to the cooling demand, which translates to quieter operation and enhanced energy savings.

The XL9U employs the use of advanced filtration systems that improve indoor air quality. With multi-layer filters, including a deodorizing filter and a HEPA filter, it effectively captures dust, allergens, and other particulates, providing clean and healthy air circulation. This is particularly beneficial for individuals with respiratory issues or allergies.

Another characteristic that sets the XL9U apart is its compact and stylish design. The unit’s sleek appearance allows it to blend seamlessly into a variety of interior decors, making it a tasteful addition to any room. Despite its small footprint, the XL9U is robust and capable of delivering superior cooling or heating performance, ensuring comfort in all seasons.

The XL9U also incorporates smart technology features, being compatible with Wi-Fi control. This allows users to manage their air conditioning settings remotely via a smartphone app, enabling greater convenience and flexibility. Voice control integration with popular smart home systems further enhances user interaction, allowing for an intuitive and hands-free experience.

In addition to its performance and technology features, the XL9U is designed with quiet operation in mind. The noise levels during operation are minimized, making it an exceptional choice for bedrooms or quiet workspaces. This focus on user comfort extends to its ease of installation and maintenance, with straightforward servicing options that reduce downtime and costs.

Overall, the Mitsubishi Electronics XL9U represents an ideal solution for consumers seeking an efficient, stylish, and technologically advanced air conditioning unit that meets modern lifestyle needs. Its combination of energy efficiency, advanced filtration, smart technology, and quiet operation makes it a top contender in the HVAC market.
Top Page Image Contents