Mitsubishi Electronics XL9U user manual Basic operation

Page 14

Basic operation (continued)

Power-off

Use the following procedure to turn off the projector. Do not turn off the projector by unplugging the power cord while the lamp is on. Unplugging while the lamp is on degrades the lampÕs performance and causes failure in the projector.

1.Press the POWER button.

¥The message ÒPOWER OFF? YES : PRESS AGAINÓ appears on the screen.

¥To cancel, press any button except the POWER button. (Some buttons on the remote control donÕt function for cancel.)

2.Press the POWER button within 10 seconds again.

¥The lamp will go out and the STATUS indicator will start blinking.

¥Though the lamp goes out at this second press of the POWER button, the air outlet fans continue operating for one minute to cool down the lamp and LCD panels. The STATUS indicator will stop blinking.

3.Unplug the power cord.

¥The POWER indicator will go out.

¥If the power cord should be unplugged accidentally while either the air inlet fan or the air outlet fans are operating or the lamp is on, allow the projector to cool down for 10 minutes with the power off. To light the lamp again, press the POWER button. If the lamp doesnÕt light up immediately, repeat pressing the POWER button two or three times. If it should still fail to light up, replace the lamp.

Important:

¥When storing the projector in the provided carrying case, the lens should face up.

AUTO POSITION button

When the image isnÕt projected in the right position with COMPUTER selected as the input source, follow the procedure below.

1.Project a bright image such as the ÒRecycle BinÓ window on the full screen.

2.If the screen saver is running, turn it off.

3.Press the AUTO POSITION button.

¥If the image is still not in the right position, adjust the image position using the SIGNAL menu.

Volume from the speaker

Press the VOLUME + or Ð button to change the volume from the speaker.

The volume control bar will appear on the screen.

VOLUME

15

¥The volume control bar will disappear about 10 seconds after the VOLUME button is released.

¥The VOLUME buttons donÕt function while the menu selection bar or the menu is being displayed.

¥When a high-level audio signal, such as a DVD audio signal, is supplied to the AUDIO IN terminal, the output from the speaker may be distorted.

AV mute

The video and audio signals are temporarily muted when the MUTE button is pressed. To cancel muting, press the MUTE button again.

¥If MUTE MODE in the INSTALLATION menu is set to IMAGE, the splash screen will appear when the MUTE button is pressed.

¥You can alter the splash screen optionally. See page 21.

¥When muting starts, the lamp mode becomes LOW, darkening the displayed image. This is not a product malfunction.

ANAMORPHIC mode

When playing DVD discs containing data of letterboxed image, press the 16:9 button. Exit the ANAMORPHIC mode by pressing the 16:9 button again.

Caution:

¥After using the projector, wait 1 minute for the air outlet fans to stop. Then unplug the power cord from the wall outlet.

¥The lamp canÕt be lit again for 1 minute after turned off for safety purpose. It will take another 1 minute for the STATUS indicator to go out. If you want to turn on the projector again, wait until the indicator goes out, and then press the POWER button.

¥The air outlet fans rotate faster as the temperature around the projector rises.

¥When the temperature around the projector rises high, the sign ÒTEMPERATURE!!Ó blinks red on the screen. If the temperature stays high, the lamp will go out automatically.

EN Ð 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents XL9U When using the projector in Europe Compliance NoticeContents Important safeguards Do not unplug the power cord during operation Do not keep using the damaged projectorDo not look into the lens when the projector is operating Clean the air-filter once a monthTerminal panel OverviewControl panel Remote control Bottom sideOperation range of the remote control Remote controlBattery installation Reception angle verticalFront projection InstallationLayout of the projector Front projection, ceiling mountingProjector + DVD player or Hdtv decoder Basic connectionsProjector + AV device VCR, etcComputer Projector + ComputerFor Macintosh About DDCPreparation for projection Adjustment of the projection anglePreparation Following casesPower-on Basic operationBasic operation Basic operation InstallationMenu operation Menu operation Computer Video mode to always output the audio that is Expand Mode .. Choose the mode for enlarging the image. SeeTerminal when Video is chosen as the source. Select Activated when a film source signal is input. When OFF isColor temperature Image adjustmentImage adjustment About color temperatureAdjustment of the image from the computer Simple adjustment methodStill Advanced featuresExpand Set the background color Setting of the image displayed during startup or mutingSetting procedure Set the image sizeTo cancel the password function Advanced featuresPassword function To enable the password functionInterval of lamp replacement Lamp replacementReset of the lamp operation time Cleaning of the projector and the ventilation slots MaintenanceCleaning of the air-filter Cleaning of the lensTroubleshooting Images arent projected on the screenTroubleshooting Images arent projected correctlyOthers Normal condition IndicatorsPower Status Abnormal conditionSpecifications Kensington LockDimensional drawings unit mm SpecificationsConnectors Replacement part Option / Not included in the boxCGA70 Mitsubishi Electric Corporation

XL9U specifications

The Mitsubishi Electronics XL9U is a cutting-edge air conditioning solution designed for optimal climate control in residential and commercial spaces. This model stands out in the competitive HVAC market primarily due to its impressive blend of energy efficiency, advanced technology, and user-friendly features.

One of the main features of the XL9U is its Energy Efficiency Rating (EER) and Seasonal Energy Efficiency Ratio (SEER), which significantly surpasses many traditional air conditioning units. This high efficiency not only reduces electricity bills but also minimizes environmental impact, aligning with Mitsubishi's commitment to sustainability. The XL9U utilizes inverter technology, allowing the compressor to adjust its speed according to the cooling demand, which translates to quieter operation and enhanced energy savings.

The XL9U employs the use of advanced filtration systems that improve indoor air quality. With multi-layer filters, including a deodorizing filter and a HEPA filter, it effectively captures dust, allergens, and other particulates, providing clean and healthy air circulation. This is particularly beneficial for individuals with respiratory issues or allergies.

Another characteristic that sets the XL9U apart is its compact and stylish design. The unit’s sleek appearance allows it to blend seamlessly into a variety of interior decors, making it a tasteful addition to any room. Despite its small footprint, the XL9U is robust and capable of delivering superior cooling or heating performance, ensuring comfort in all seasons.

The XL9U also incorporates smart technology features, being compatible with Wi-Fi control. This allows users to manage their air conditioning settings remotely via a smartphone app, enabling greater convenience and flexibility. Voice control integration with popular smart home systems further enhances user interaction, allowing for an intuitive and hands-free experience.

In addition to its performance and technology features, the XL9U is designed with quiet operation in mind. The noise levels during operation are minimized, making it an exceptional choice for bedrooms or quiet workspaces. This focus on user comfort extends to its ease of installation and maintenance, with straightforward servicing options that reduce downtime and costs.

Overall, the Mitsubishi Electronics XL9U represents an ideal solution for consumers seeking an efficient, stylish, and technologically advanced air conditioning unit that meets modern lifestyle needs. Its combination of energy efficiency, advanced filtration, smart technology, and quiet operation makes it a top contender in the HVAC market.
Top Page Image Contents