Mitsubishi Electronics XL2U user manual Turning off the projector, Sound from the speaker, AV mute

Page 14

To operate projector power ON (Continue)

Turning off the projector

7.Press the POWER button.

The message “POWER OFF? YES : PRESS AGAIN” appears on the screen.

•To exit from this mode, press any button except the POWER button. (Some buttons on the remote control do not work for exit from this mode.)

8.Press the POWER button again.

The light source lamp will be turned off.

Pressing the POWER button second time will shut off the light source lamp, but the exhaust fan con- tinues to operate for 60 seconds to cool down the light source lamp and LCD panels. In this time, the lamp indicator will be turned off.

9.Turn off the main power switch. When turning off the main switch, the POWER indicator turns off.

•In cases where the main power switch is acciden- tally turned off when either the intake/exhaust fan or the power source lamp is in operation, allow the unit to cool down for 10 minutes with the power turned off. Repeat step 3 when turning on the power source lamp. If the lamp does not turn on immediately, repeat this step two or three times. Replace the lamp if it should still fail to turn on.

AUTO POSITION button

When the source is selected to COMPUTER and the image is not in the right place, follow as shown below.

1.Set screen to the brightest display as possible (e.g., full-screen display of the “Trash” window).

2.If the screen saver is running, turn off the screen saver.

3.Press the AUTO POSITION button.

•If the image is still not in the right place, adjust the image position by using the SIGNAL menu.

The sound from the speaker

The sound from the speaker is mono.

•The output sound is selected by changing the setting of AUDIO MODE in the FEATURE menu. See page 17 for details.

The volume from the speaker

Press the volume + or – button to change the volume from the speaker.

The volume control bar will appear on the screen.

30

•The volume control bar will disappear about 4 seconds after releasing the volume buttons.

•The volume buttons do not work when MENU selection bar or MENU is displayed.

AV mute

Image and audio are temporarily erased with press- ing the MUTE button. To restore the image and audio to the normal mode, press the MUTE button again.

•If the MUTE MODE in the INSTALLATION menu is set to LOGO, the splash screen will appear by pressing the MUTE button.

•You can alter the splash screen freely. Please contact your dealer or Mitsubishi sales office for further information.

•The lamp mode becomes “LOW” during muting. Therefore, the display of LOGO will darken, which isn’t a failure.

•Muting will be cancelled in 3 hours automatically for the purpose of protecting devices. However, when the mute mode has been set to “LOGO,” muting won’t be cancelled.

ANAMORPHIC mode

When playing DVD discs containing data of letterboxed image, press the 16:9 button. Exit the ANAMORPHIC mode, by pressing the 16:9 button again.

Caution:

•When you have finished using this equipment, wait 60 seconds for the exhaust fans to stop. Then turn off the main switch and unplug the power cable from the wall outlet, for safety purposes.

•After the lamp is turned off, the lamp cannot be switched on again for 60 seconds as a precaution- ary measure. If you wish to turn on the projector again, wait until the indicator is off then press the POWER button.

•The exhaust fan rotates faster when the tempera- ture around the projector rises.

•When the temperature around the projector becomes too high, the sign “TEMPERATURE!!” blinks red on the screen. If the temperature stays too high, the lamp will be shut off automatically .

EN – 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents LCD When using the projector in Europe Compliance NoticeContents Important safeguards Do not modify this equipment Clean the air-filter once a monthNever remove the cabinet If you break or drop the cabinetOverview Control panelAbout the laser beam Lamp cover Adjustment footHow to enable the Laser button Operation area Using the remote controlBattery installation Front projection InstallationOrientation of the projector Front projection, ceiling mountProjector + DVD player or Hdtv decoder Basic connectionsProjector + AV equipment About DDC For using MacintoshProjector + Personal computer Getting ready for projection Adjusting the angle of projectionPreparing the projector for operation Auto Position button Mute button To operate projector power onButton Turning off the projector Volume from the speakerAnamorphic mode Sound from the speakerMenu operation Basic operationColor TEMP. ... Adjusts the color temperature. See When sRGB is ON, Color MATRIX, Color TempGamma Mode can’t be adjusted Automatically adjusts the brightness and contrastAutomatically selected depending on the input signal. If Expand Mode .... Select the mode for enlarging screen. SeeAudio input terminal when Computer is selected as Image may become blurred. In this case, adjust ClampAdjusting the image Picture adjustmentUser memory for signal setting Color matrixColor temperature Adjustment from personal computerPicture in Picture PinP Advanced features for presentationExpand StillProjector + PC with PS/2 connector Mouse remote controlProjector + PC with USB connector ConnectionInterval of the lamp replacement Lamp replacementHow to reset the operation time meter Projector automatically shuts off when the lampCleaning the lens MaintenanceCleaning the air-filter Cleaning the projector and the ventilation grilleTroubleshooting Problems Cause Possible SolutionsNormal condition IndicatorsTemp indicator Abnormal conditionSpecifications Rated input LCD panelsReplacement part Option / Not included in the box ConnectorsDimensional drawings mm What’s included in the boxSpecifications

XL2U specifications

The Mitsubishi Electronics XL2U is an advanced display projector known for its versatility and performance in various settings, making it a popular choice for both business and educational environments. This projector combines state-of-the-art technology with user-friendly features, providing an exceptional viewing experience.

One of the standout features of the XL2U is its outstanding image quality. It boasts a brightness of 2700 ANSI lumens, ensuring vivid and clear images even in well-lit rooms. Coupled with a native XGA resolution of 1024 x 768 pixels, the projector delivers sharp and detailed visuals, which is essential for presentations, lectures, and multimedia displays. The high contrast ratio further enhances image quality, providing deeper blacks and more vibrant colors.

In terms of connectivity, the XL2U is equipped with various input options, including HDMI, VGA, and composite video, allowing users to connect different devices effortlessly. This flexibility ensures compatibility with laptops, desktops, and other multimedia sources, making it an ideal choice for dynamic presentations. The projector also supports a range of video formats, ensuring that users can display content in the format that best suits their needs.

Another key characteristic of the XL2U is its portability. Weighing in at just a little over 5 pounds and featuring a compact design, this projector is easy to transport between locations, making it convenient for professionals who frequently travel for meetings or training sessions. The setup is straightforward, allowing for quick installation and adjustment, which is essential for time-sensitive environments.

Mitsubishi has also incorporated advanced technologies into the XL2U to enhance user experience. The projector features a long lamp life of up to 5000 hours in eco mode, which reduces maintenance costs and downtime. Moreover, the built-in speaker provides adequate audio output for smaller settings, eliminating the need for additional audio equipment in certain situations.

The XL2U's energy efficiency is also noteworthy. It utilizes Mitsubishi's Eco Mode technology, which not only extends the life of the lamp but also reduces power consumption, contributing to environmental sustainability.

In summary, the Mitsubishi Electronics XL2U is a feature-rich, reliable projector that excels in both performance and portability. Its high brightness, excellent image quality, versatile connectivity options, and user-friendly design make it a compelling choice for a wide range of applications, from corporate boardrooms to classroom settings. With its robust build and advanced technologies, the XL2U stands out as a dependable tool for effective presentations and engaging visual displays.
Top Page Image Contents