Mitsubishi Electronics XL2U user manual Never remove the cabinet, Do not modify this equipment

Page 5

WARNING:

Unplug immediately if there is something wrong with your projector.

Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in the Owner's Guide, do not attempt to service this product yourself. Please contact your dealer when you want to fix, adjust or inspect the projector.

Do not modify this equipment.

It can lead to fire or electric shock.

If you break or drop the cabinet.

Do not keep using this equipment if you break or drop it. Unplug the projector and contact your dealer for inspection. It may lead to fire if you keep using the equipment.

Do not face the projector lens to the sun.

It can lead to fire.

Use correct voltage.

If you use incorrect voltage, it can lead to fire.

Do not place the projector on uneven surface.

Place the projection on a leveled and stable surface only. Please do not place equipment on unstable surfaces.

Do not look into the lens when it is operating. It may hurt your eyes.

Never let children look into the lens when it is on.

Do not turn off the main power abruptly or unplug the projector during operation.

It can lead to lamp breakage, fire, electric shock or other trouble. It is best to wait for the fan to turn off before turning main power off.

Do not touch Air outlet grille and Bottom plate which becomes hot.

Do not touch them or put other equipment in front of Air outlet grille. The heated Air outlet grille and Bot- tom plate may cause injury or damage to other equip- ment.

Also, do not set the projector on the desk which is eas- ily

affected by heat.

Clean the air-filter once a month.

Clean the air-filter frequently. If the filter or ventila- tion slots become clogged with dirt or dust, the tem- perature inside of the projector may rise and cause some troubles, such as damage of inside parts, and shortening the life of panel.

Do not look into the air outlet grille when projector is operating.

Heat, dust etc. may blow out of it and hurt your eyes.

Place of installation

For safety’s sake, refrain from setting the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as specified below.

•Operating temperature: between +41° F (+5° C) and +95° F (+35° C)

•Operating humidity: between 30 and 90%

•Never put any heat-producing device under the pro- jector so that the projector does not overheat.

•Do not attach the projector to a place that is un- stable or subject to vibration.

•Do not install the projector near any equipment that produces a strong magnetic field. Also refrain from installing near the projector any cable carrying a large current.

•Place the projector on a solid, vibration free sur- face: otherwise it may fall, causing serious injury to a child or adult, and serious damage to the prod- uct.

•Do not stand the projector: it may fall, causing seri- ous injury and damage to the projector.

•Slanting the projector more than ± 10˚(right and left) or ± 15˚ (front and rear) may cause trouble or explo- sion of the lamp.

•Do not place the projector near air-conditioning unit or heater to avoid hot air to the exhaust and venti- lation hole of the projector.

ENGLISH

COMPLIANCE NOTICE OF FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced Radio / TV technician for help.

Changes or modifications not expressly approved by Mitsubishi could void the user's authority to operate this equipment.

COMPLIANCE NOTICE OF INDUSTRY CANADA

This Class B digital apparatus complies with Canadian ICES-003.

EN – 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents LCD Compliance Notice When using the projector in EuropeContents Important safeguards Never remove the cabinet Clean the air-filter once a monthDo not modify this equipment If you break or drop the cabinetControl panel OverviewAbout the laser beam Lamp cover Adjustment footHow to enable the Laser button Operation area Using the remote controlBattery installation Orientation of the projector InstallationFront projection Front projection, ceiling mountProjector + DVD player or Hdtv decoder Basic connectionsProjector + AV equipment About DDC For using MacintoshProjector + Personal computer Getting ready for projection Adjusting the angle of projectionPreparing the projector for operation Auto Position button Mute button To operate projector power onButton Anamorphic mode Volume from the speakerTurning off the projector Sound from the speakerBasic operation Menu operationGamma Mode can’t be adjusted When sRGB is ON, Color MATRIX, Color TempColor TEMP. ... Adjusts the color temperature. See Automatically adjusts the brightness and contrastAudio input terminal when Computer is selected as Expand Mode .... Select the mode for enlarging screen. SeeAutomatically selected depending on the input signal. If Image may become blurred. In this case, adjust ClampUser memory for signal setting Picture adjustmentAdjusting the image Color matrixAdjustment from personal computer Color temperatureExpand Advanced features for presentationPicture in Picture PinP StillProjector + PC with USB connector Mouse remote controlProjector + PC with PS/2 connector ConnectionHow to reset the operation time meter Lamp replacementInterval of the lamp replacement Projector automatically shuts off when the lampCleaning the air-filter MaintenanceCleaning the lens Cleaning the projector and the ventilation grilleProblems Cause Possible Solutions TroubleshootingTemp indicator IndicatorsNormal condition Abnormal conditionRated input LCD panels SpecificationsDimensional drawings mm ConnectorsReplacement part Option / Not included in the box What’s included in the boxSpecifications

XL2U specifications

The Mitsubishi Electronics XL2U is an advanced display projector known for its versatility and performance in various settings, making it a popular choice for both business and educational environments. This projector combines state-of-the-art technology with user-friendly features, providing an exceptional viewing experience.

One of the standout features of the XL2U is its outstanding image quality. It boasts a brightness of 2700 ANSI lumens, ensuring vivid and clear images even in well-lit rooms. Coupled with a native XGA resolution of 1024 x 768 pixels, the projector delivers sharp and detailed visuals, which is essential for presentations, lectures, and multimedia displays. The high contrast ratio further enhances image quality, providing deeper blacks and more vibrant colors.

In terms of connectivity, the XL2U is equipped with various input options, including HDMI, VGA, and composite video, allowing users to connect different devices effortlessly. This flexibility ensures compatibility with laptops, desktops, and other multimedia sources, making it an ideal choice for dynamic presentations. The projector also supports a range of video formats, ensuring that users can display content in the format that best suits their needs.

Another key characteristic of the XL2U is its portability. Weighing in at just a little over 5 pounds and featuring a compact design, this projector is easy to transport between locations, making it convenient for professionals who frequently travel for meetings or training sessions. The setup is straightforward, allowing for quick installation and adjustment, which is essential for time-sensitive environments.

Mitsubishi has also incorporated advanced technologies into the XL2U to enhance user experience. The projector features a long lamp life of up to 5000 hours in eco mode, which reduces maintenance costs and downtime. Moreover, the built-in speaker provides adequate audio output for smaller settings, eliminating the need for additional audio equipment in certain situations.

The XL2U's energy efficiency is also noteworthy. It utilizes Mitsubishi's Eco Mode technology, which not only extends the life of the lamp but also reduces power consumption, contributing to environmental sustainability.

In summary, the Mitsubishi Electronics XL2U is a feature-rich, reliable projector that excels in both performance and portability. Its high brightness, excellent image quality, versatile connectivity options, and user-friendly design make it a compelling choice for a wide range of applications, from corporate boardrooms to classroom settings. With its robust build and advanced technologies, the XL2U stands out as a dependable tool for effective presentations and engaging visual displays.
Top Page Image Contents