Mitsubishi Electronics XD80 user manual Operating, Switch on the projector power

Page 20

Power Cable Connections and Switching the Power On/Off

There is an order in which the power cable is connected and the power is switched on/off.

Operating

1 Connect the AC IN connector of the projector and the power outlet using the supplied power cable.

The STANDBY indicator will light in amber, and the unit will enter the standby mode.

STATUS STANDBY

Lit amber

Firmly plug in all the way.

To wall outlet

2 ￿ Turn the lens cover clockwise.

￿When the lens cover stops with a click, the projector is ready for projection.

1

URSO STANDBY

MODE

COLOR

DUAL

STATUS

 

MENU

RUOS

YBDN ATS

MODE

COLOR

DUAL

SU

 

STAT

 

UNEM

2

3 Switch on the projector power

Press the STANDBY button.

STANDBYMENU

RGBENTER

STATUS STANDBY

(button on main unit)

The first time the power is switched on after purchase, [Menu Language Select] will be displayed. See Page E-20 for informa- tion about language selection.

•When the power is turned on, the STANDBY indicator starts blink- ing green, then stops blinking after about 60 seconds. If the STATUS indicator lights green at this time, the lamp mode is set to “Low”. See E-26 and 48 for instructions on selecting.

•If the power does not come on, see “When the STATUS Indicator is

Lit or Blinking” on Page E-54.

If the “Password” input window is displayed: See E-31. A password is set for this projector.

The projector cannot be used unless the correct password is input. To turn off the power: See E-21.

The projector is now capable of regular projection.

VIDEO CANCEL

QUICK

Q

This indicator is also lit green in Low-mode.

STATUS STANDBYSTATUS STANDBYSTATUS STANDBY

 

Blinking green

Lit green

Lit amber

(Approximately 60

Power is on

 

seconds)

 

 

Note:

The image can be muted quickly by closing the lens cover while the image is being projected.

4 Switch on the power of the connected equipment

Note:

•When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached easily.

•Press the STANDBY button after the STANDBY indicator is lit in amber.

•The included power cable is exclusively for use with the XD80U. Never use it with other products.

•Use the appropriate cord for your country.

•The provided power cord for the U.S. is rated at 120 V. Never connect this cord to any outlet or power supply using other voltages or frequencies than rated. If you want to use a power supply using other voltage than rated, prepare an appropriate power cord separately.

E-19

Page 19 Page 21
Image 20
Page 19 Page 21
Contents XD80 Important Safety Information When using the projector in EuropeImportant Safety Information Do not look into the lens when it is operating Place of installationNever remove the cabinet Do not modify this equipmentMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Names of the Main Unit Parts Built-in Security SlotNames of the Main Unit Parts Names of the Remote Control Parts Precautions Handling of the Remote ControlPreparing the Remote Control Button Battery ReplacementRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen Placement Guide Screen Size and Projection DistancePersonal computer RGB signal cable Supplied item Connections with Personal ComputerManufacturer Model Key To Output the External Output Signal of a Notebook ComputerConnecting Personal Computers and Video Equipment Connections with Composite Signals Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors Ferrite core CableConnections with Component Signals Projecting component signalsConnections with the Audio Jack Audio cable Mini plug Not supplied Mounting the Ferrite CoreSwitch on the projector power Switch on the power of the connected equipmentOperating Projector is now capable of regular projectionPower Cable Connections and Switching the Power On/Off Press the Enter button to setThis completes the selection of the display language CursorUnplug the power cable FinishingButton on main unit Instant Shut DownAdjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Auto Keystone FunctionMaking Adjustments with the Adjusters Adjuster button Lowering the projection imageFocus ring Raising the projection imageAutomatic Adjustment When Auto Source is OnWhen Auto Source is Off General OperationGeneral Operation Video Signals / Component SignalsSelection of Aspect Ratio Cancelling Video and Audio Temporarily Lamp ModeSelection of the Color Mode DCM Freezing a Moving PictureKeystone Manual Adjustment Adjustment of the VolumePress the Zoom button to enlarge the image Enlargement of the Image and Video MovementImage can also be moved in the following circumstances Using the Presentation Timer Press the Enter button and start the timerTimer Display Moving the Position of the Timer DisplayProtecting the Projector with the Security Lock Input the password using the number buttons 1 to Canceling the password/Changing the passwordCanceling the password Changing the passwordUsing the Quick Menu Content of Adjustments and SettingsMenu Operation Method Names and Functions of Buttons Used for Menu OperationsMenu Screen Names and Functions Menu Operation MethodPerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation Color ViewInfo Menu name Item Name Sub Menu SetupOption Picture Adj. Picture Adjustment ImageBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionReset Fine PicturePosition ImageGamma Dual Color ModeColor Selection contents at the time of YPbPr input Color TempWhite Color SpaceWhite Balance Video Signals ViewAspect FilterVertical Flip / Horizontal Flip KeystoneAuto Keystone ViewAuto Source SetupAuto Power Off This function sets the display position of the menu SetupMenu Position Presentation Timer VolumeTo start the timer Input FormatOption LanguageOn Screen BackgroundOption Startup ScreenSecurity Lock Factory Default Lamp Timer ResetInfo StatusInfo Resolution / FrequencyLamp Timer When an Indicator is Lit or Blinking Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeMount the lamp cover Reset the Lamp TimerMount the new lamp cartridge Specifications OpticalElectrical MechanicalSignal Resolution Frequency VideoTable of Supported Frequency Digital AnalogCabinet Dimensions Mitsubishi Electric Corporation
Top Page Image Contents