Mitsubishi Electronics XD80 user manual Mount the new lamp cartridge, Mount the lamp cover

Page 60

Replacing the Lamp Cartridge

5 Mount the new lamp cartridge.

(1)Push the lamp cartridge in slowly.

(Line it up with the screw holes in the projector.)

(2)Turn the lamp cartridge’s two screws clockwise to tighten them.

6 Mount the lamp cover.

(1)Set the tip of the lamp cover in place, then close the lamp cover.

(2) Turn the lamp cover’s screw clockwise to tighten it.

2

1

7 Reset the Lamp Timer.

Connect the power cable, switch on the power, and then reset.

Select [Info.] → [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization verification display. Press the ENTER button again. See “Lamp Timer Reset” on Page E-52.

Note:

After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should this happen, while the projector is in the standby mode, simultaneously holding down the projector’s SOURCE button and AUTO button for more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared.

Contact a store that sells the XD80U for a replacement lamp. Indicate you need a VLT-XD80LP replacement lamp for the XD80U (order code 915P051-10).

E-59

Image 60

Contents XD80 Important Safety Information When using the projector in EuropeImportant Safety Information Do not look into the lens when it is operating Place of installationNever remove the cabinet Do not modify this equipmentMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Names of the Main Unit Parts Built-in Security SlotNames of the Main Unit Parts Names of the Remote Control Parts Precautions Handling of the Remote ControlPreparing the Remote Control Button Battery ReplacementRemote Control Range Using the remote control for the first timeProcedure Up to Projecting to the Screen Placement Guide Screen Size and Projection DistancePersonal computer RGB signal cable Supplied item Connections with Personal ComputerTo Output the External Output Signal of a Notebook Computer Connecting Personal Computers and Video EquipmentManufacturer Model Key Connections with Composite Signals Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors Ferrite core CableConnections with Component Signals Projecting component signalsConnections with the Audio Jack Audio cable Mini plug Not supplied Mounting the Ferrite CoreSwitch on the projector power Switch on the power of the connected equipmentOperating Projector is now capable of regular projectionPower Cable Connections and Switching the Power On/Off Press the Enter button to setThis completes the selection of the display language CursorUnplug the power cable FinishingButton on main unit Instant Shut DownAdjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Auto Keystone FunctionMaking Adjustments with the Adjusters Adjuster button Lowering the projection imageFocus ring Raising the projection imageAutomatic Adjustment When Auto Source is OnWhen Auto Source is Off General OperationVideo Signals / Component Signals Selection of Aspect RatioGeneral Operation Cancelling Video and Audio Temporarily Lamp ModeSelection of the Color Mode DCM Freezing a Moving PictureKeystone Manual Adjustment Adjustment of the VolumeEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesPress the Zoom button to enlarge the image Using the Presentation Timer Press the Enter button and start the timerTimer Display Moving the Position of the Timer DisplayProtecting the Projector with the Security Lock Input the password using the number buttons 1 to Canceling the password/Changing the passwordCanceling the password Changing the passwordUsing the Quick Menu Content of Adjustments and SettingsMenu Operation Method Names and Functions of Buttons Used for Menu OperationsMenu Screen Names and Functions Menu Operation MethodPerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation Color ViewMenu name Item Name Sub Menu Setup OptionInfo Picture Adj. Picture Adjustment ImageBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionReset Fine PicturePosition ImageDual Color Mode ColorGamma Selection contents at the time of YPbPr input Color TempWhite Color SpaceWhite Balance Video Signals ViewAspect FilterVertical Flip / Horizontal Flip KeystoneAuto Keystone ViewSetup Auto Power OffAuto Source Setup Menu PositionThis function sets the display position of the menu Presentation Timer VolumeTo start the timer Input FormatOption LanguageOn Screen BackgroundStartup Screen Security LockOption Factory Default Lamp Timer ResetInfo StatusResolution / Frequency Lamp TimerInfo When an Indicator is Lit or Blinking Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeReset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Specifications OpticalElectrical MechanicalSignal Resolution Frequency VideoTable of Supported Frequency Digital AnalogCabinet Dimensions Mitsubishi Electric Corporation