Using the menu (Continued)
■The image adjustment menu
Use this menu to adjust
Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”.
Item | Description | Computer | Y/PB/PR | Video | ||
Contrast | Lower | Higher | Yes | Yes | Yes | Yes |
|
|
|
|
|
|
|
Brightness | Darker | Brighter | Yes | Yes | Yes | Yes |
|
|
|
|
|
|
|
Color | Lighter | Deeper | No | Yes | Yes | Yes |
|
|
|
|
|
|
|
Tint [Note 1] | Reddish | Greenish | No | No | Yes | Yes |
Sharpness | Softer | Sharper | No | Yes | Yes | Yes |
|
|
|
|
|
|
|
Less red | More red | Yes | Yes | Yes | Yes | |
|
|
|
|
|
|
|
Less green | More green | Yes | Yes | Yes | Yes | |
|
|
|
|
|
|
|
Less blue | More blue | Yes | Yes | Yes | Yes | |
|
|
|
|
|
|
|
Up/down shift [Note 2] | Shift down | Shift up | No | Yes | Yes | Yes |
|
|
|
|
|
|
|
Notes
1:Tint can only be adjusted when Video mode p.24 is set to NTSC or NTSC4.43.
2:Up/down shift can only be adjusted when Screen size p.31 is set Wide.
■The default setting menu
This menu shows placement status and other settings.
Item |
| Description |
|
|
|
|
|
| |||||
Projection | Sets projection mode in accordance with Placement Style p.18 | |||||
mode | (Placed | (Rear) | (Hung from |
|
| (Back hung |
| on floor) | ceiling) |
|
| from ceiling) | |
|
|
|
| |||
|
| |||||
No signal | Sets the period of time to wait until turning off the power after signal input stops: | |||||
power off | Off (not turned off) | 1 min | 2 min | ... | 60 min | |
| ||||||
|
| |||||
Power on | Sets whether to turn on the power when the ON/STANDBY button is pressed | |||||
| (Manual), or when the AC power cord is plugged in (Auto). Manual | Auto | ||||
|
|
|
|
|
| |
Lamp power [Note 1] | Sets the lamp power |
| Standard |
| Low | |
Note
1:When Lamp power is set to low, the screen becomes a little darker, but the cooling fan noise gets quieter.
Notes
•Note that if Power on is set to Auto, then if the AC power cord is plugged in when power is restored after a power outage, the projector power will come on.
•Even if Power on is set to Auto, press the ON/STANDBY button to turn off the power. Unplugging the AC power cord to cut off the power will shorten the life of the lamp.
■The display setting menu
Use this menu to set screen
Item |
| Description |
|
|
|
| |
|
|
|
|
|
|
|
|
Screen size |
|
|
|
|
|
|
|
| (Full): Display with LCD panel’s resolution |
|
|
|
| ||
| (Thru): Display with sampling resolution (for computer input) | ||||||
| (Wide): | ||||||
|
|
|
| ||||
Language | Select one of the languages below to use for displaying menus and messages | ||||||
| [ : Enter setting mode] [ | :Selection] |
| [Apply: | ] | ||
| English/Français/Deutsch/Italiano/Español/ |
|
|
|
| ||
| Português/ | / | / | / |
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
| |
Background | Screen to display when there is no input signal | (Logo) |
|
| (Blue) | (None) | |
Icon | Display icons as function guides |
|
| On | Off | ||
Display |
| On | Off | ||||
Notes
•If “Thru” is selected for screen size, portions exceeding the pixel count of the LCD panel p.37 will not appear on the screen. Note that for RGB signals with clock speeds SXGA3_60 p.38 or lower, all input pixel signals are sampled. However, if the clock speed is higher than this, the RGB pixel signal is reduced before sampling.
•Displaying the images with the aspect ratio different from the original with the purpose of other than the personal and private viewing, using the screen size menu may violate the copyright protected by the law.
■Reset menu (Special menu)
When other menus are not displayed and the 
button is held down, the menu appears.
•Select Reset All and press the 
button to return all menu items to the factory settings.
Item | Description |
|
|
| |
Reset all | Reset all menu items to their factory settings | |
| [ : Enter execution mode] [Yes | No] [Apply: ] |
|
|
|
Operations
30 | 31 |