Password function
This projector is equipped with the password function that is designed for prevention of wrong operation by children and restriction on operation by other than specified users.
MENU ACCESS ............All the buttons except for the POWER button
To cancel the password function:
1.Display the FEATURE menu.
2.Press the S or T button to select PASSWORD FUNCTION.
3.Press the ENTER button.
• The screen for canceling the password function will appear.
ENGLISH
on the projector are disabled. (The buttons on the remote con- trol are enabled.) You can use this mode as a measure of pre- vention of wrong operation by children and restriction on operation by other than specified users.
opt.
FEATURE
SVGA60
To enable the password function:
1.Display the FEATURE menu.
2.Press the S or T button to select PASSWORD FUNCTION.
3.Press the ENTER button.
• The screen for setting the password function will appear.
UNLOCK | OK |
4.Press the ENTER button.
• The screen for entering the password will appear.
opt.
FEATURE
SVGA60
LOCK | OK |
|
|
•When the password has already been set, the mode won’t be changed. In such cases, press the ENTER button to can- cel the password function and try again.
4.Press the ENTER button.
•The screen for entering a password will appear.
5.Press the W or X button to select a number from 0 to 9.
6.Press the ENTER button.
•You can set the next digit.
7.Repeat steps 5 and 6 to set a
8.Enter the password again for confirmation using the same steps.
9.When the last digit has been entered, the password set up is complete and the password menu will be off.
•If the entered passwords don't match, it will jump to the INPUT PASSWORD field to start over again.
•To cancel the procedure, select Exit and press the ENTER button.
•You can cancel the procedure by pressing the MENU button alternatively.
5.Press the W or X button to select a number from 0. to 9.
6.Press the ENTER button.
•You can set the next digit.
7.Repeat steps 5 and 6 to enter the
8.When the last digit has been entered, the password set up is complete and the password menu will be off.
•If the entered passwords don't match, it will jump to the INPUT PASSWORD field to start over again.
•To cancel the procedure, select Exit and press the ENTER button.
•You can cancel the procedure by pressing the MENU button alternatively.
Important:
•If you forget your password, keep pressing the MENU and ENTER buttons on the control panel at the some time about three seconds to cancel the password function.