Mitsubishi Electronics SD105U Preparation for projection, Adjustment of the projection angle

Page 12

Preparation

Preparation for projection

1.Attach the provided power cord to the projector.

2.Plug the power cord in the wall outlet.

3.Remove the lens cap.

Warning:

•Do not look into the lens directly when the projector is on.

•The lens cap is for protecting the lens. If you leave the lens cap on the lens with the projector turned on, it may be deformed because of heat build-up. Remove the lens cap when you turn on the projector.

•One of power cords for the U.S., Europe and U.K. is provided appropriately.

•This projector uses the power plug of three-pin grounding type. Do not remove the grounding pin from the power plug. If the power plug doesn’t fit your wall outlet, ask an electrician to change the wall outlet.

•In case that the power cord for the U.S. is provided with this projector, never connect this cord to any outlet or power supply using other voltages or frequencies than rated. If you want to use a power supply using other voltage than rated, prepare an appropriate power cord separately.

•Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.

•Do not place any objects on the power cord or do not place the projector near heat sources to prevent damage to the power cord. If the power cord should be damaged, contact your dealer for replacement because it may cause fire or electric shock.

•Do not modify or alter the power cord. If the power cord is modified or altered, it may cause fire or electric shock.

Caution:

•Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord.

•Do not plug in or out the power cord with your hand wet. It may cause electric shock.

Adjustment of the projection angle

For the best projection, project images on a flat screen installed at 90 degrees to the floor. If necessary, tilt the projector using the two adjustment feet on the bottom of the projector.

Screen

Adjustment feet

1.Tilt up the project to the appropriate angle.

2.Press the foot adjustment buttons next to the adjustment feet, and the adjustment feet will come out.

3.Release the buttons to lock the adjustment feet to that position.

4.Rotate the adjustment feet for fine adjustment.

After using the projector:

5.Put the adjustment feet back into the projector by pressing the foot adjustment buttons.

Important:

•If necessary, rotate the adjustment feet (front) for fine adjustment.

•Install the screen on a flat wall at 90 degrees to the floor.

•Slanting the projector more than ±10° (right and left) or ±15° (front and rear) may cause trouble or explosion of the lamp. You can tilt the projector up to 7 degrees using the adjustment feet only.

•Images may not be projected in a shape of a regular rectangle or with its aspect ratio 4:3, depending on the installation conditions of the projector and the screen.

•To correct vertical keystone distortion, press the KEYSTONE but-

ton on the projector or the remote control to display KEYSTONE, and adjust the image by pressing the S, T button (or VOLUME +,

- button on the remote control).

In the following cases:

Press the T

Press the S

(or -) button.

(or +) button.

•When the keystone adjustment is carried out, the adjustment value is indicated. Note that this value doesn’t mean a projection angle.

•The allowable range of the adjustment value in the keystone adjustment varies depending on the installation conditions.

•When the keystone adjustment takes effect, the resolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns. They are not due to product malfunctions.

•Noise may appear on the screen during the keystone adjustment because of the type of the video signal being projected and the setting values of the keystone adjustment. In such cases, set the keystone adjustment values in the range where the image is dis- played without noise.

•When the keystone adjustment is carried out, the image may not be displayed correctly because of the type of input signal.

•The keystone adjustment doesn't work when no signal.

EN-12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents SD105U When using the projector in Europe ShockContents Important safeguards Do not keep using the damaged projector Do not look into the lens when the projector is operat- ingDo not unplug the power cord during operation Place of installationOverview Control panel Terminal board11 13 Bottom side Remote control Lamp cover Adjustment feet frontRemote control Battery installationOperation range of the remote control Installation Layout of the projectorFront projection Front projection, ceiling mountingBasic connections Projector + AV deviceProjector + DVD player or Hdtv decoder Projector + Computer For computer with Mini D-SUBFor Macintosh Adjustment of the projection angle After using the projectorPreparation Preparation for projectionPower-on Basic operationPower-off Volume from the speakerAnamorphic mode Instant Shut DownMenu operation Basic operationMenu operation Feature Image adjustment Image adjustmentColor temperature Adjustment of the image from the computer Simple adjustment methodWhen the image flickers or the image is out of focus To move the image horizontallyAdvanced feature StillTo resume the motion in the image Page-up and page-downPassword function To cancel the password functionTo enable the password function Lamp replacement Reset of the lamp operation timeInterval of lamp replacement Troubleshooting Images aren’t projected on the screenTroubleshooting Images aren’t projected correctlyMaintenance Cleaning of the projector and the ventilation slotsCleaning of the lens OthersIndicators Normal conditionAbnormal condition Specifications Kensington LockConnectors Dimensional drawings unit mmReplacement part What’s included in the boxTV60 and TV50 are equivalent to 480I and 576I respectively Mitsubishi Projector Contact Information
Related manuals
Manual 30 pages 62.12 Kb

SD105U specifications

The Mitsubishi Electronics SD105U is a cutting-edge projector designed to cater to a variety of presentations and display needs, blending portability with advanced features that enhance user experience. This model stands out in several areas, such as brightness output, resolution, and connectivity options, making it suitable for business, educational institutions, and even home use.

At the heart of the SD105U is its high brightness output of 3,000 ANSI lumens, which ensures that presentations remain vivid and clear even in well-lit rooms. This feature is critical for auditoriums or conference rooms where ambient light can often wash out visuals. Coupled with a contrast ratio of 2,000:1, the projector produces deep blacks and vibrant colors, contributing to sharp images and detailed presentations.

The SD105U supports a native resolution of XGA (1024x768), making it ideal for displaying high-quality images, graphics, and text. This resolution is well-suited for PowerPoint presentations and academic lectures, providing clarity that captures and retains audience attention. Additionally, the projector features a range of aspect ratios, including 16:9 for widescreen displays, allowing for versatility depending on the content being projected.

One of the key technologies incorporated into the SD105U is the 3LCD system, which employs three separate LCD panels for red, green, and blue light. This design not only enhances color reproduction but also minimizes the risk of color breakup, leading to smoother and more realistic visuals. As a result, users can expect impressive color accuracy and lifelike images.

In terms of connectivity, the SD105U is equipped with multiple input options, including HDMI, VGA, and USB ports. This range of connectivity allows for seamless integration with various devices, whether it's laptops, media players, or even smartphones, ensuring that users can easily share their content. Additionally, the projector supports digital and analog signals, enhancing its compatibility with older equipment.

The SD105U is also designed with user convenience in mind. Features like a lightweight chassis and robust carry handle make it portable, perfect for professionals on the go. It also includes a quick-start option, allowing users to power up the device rapidly and get started without delays, crucial for time-sensitive presentations.

Moreover, its lamp life spans up to 5,000 hours in economy mode, reducing the need for frequent replacements and lowering overall maintenance costs. This longevity is a significant benefit for institutions and businesses looking to minimize downtime and expenses.

In summary, the Mitsubishi Electronics SD105U is a versatile projector that combines high brightness, excellent image quality, and practicality, making it an ideal solution for various applications. Whether used in business, education, or entertainment, its advanced technologies and features ensure that users can deliver impactful presentations that leave a lasting impression.
Top Page Image Contents