Mitsubishi Electronics SD206U user manual Basic operation, Power-on

Page 13

Basic operation

4

6

ENGLISH

31, 2

5

5

3, 1, 2

5

Power-on

1.Turn on the device connected to the projector first.

2.Plug the power cord in the wall outlet.

•The POWER indicator lights up.

•If the power cord is unplugged from the wall outlet before the projector is cooled down completely after use, the fans may start rotating when the power cord is plugged in and the POWER button is pressed next time.

3.Press the POWER button on the control panel or the ON button on the remote control.

•It may take about one minute for the lamp to light up.

•The lamp occasionally fails to light up. In this case, wait for the re-try. Still fails after retry, try to light the lamp again. If the temperature of lamp is high, wait a few minutes and try to light the lamp again.

•After the POWER button is pressed, the image may flicker before the lamp becomes stable. This is not a product mal- function.

•Regardless of the setting of LAMP MODE in the INSTALLA- TION menu, the STANDARD lamp mode is activated by default whenever the projector is turned on.

Indicator

STATUS

POWER

REMARKS

Condition

 

 

 

 

 

 

 

Stand-by

-

Red

-

 

 

 

 

Turn on process of the power

-

Blinking red

About 4

seconds

 

 

 

 

 

 

 

 

 

 

Can not turn

Turn on process of the lamp

Blinking green

Green

off about 60

seconds after

 

 

 

 

 

 

turning on.

 

 

 

 

When the lamp is on.

Green

Green

-

 

 

 

 

Important:

•Do not cover the lens with the lens cap while the lamp is on.

•The projector starts warming up when the POWER button is pressed. During the warm-up process, images may appear dark and no commands are accepted. The projector cannot be turned off within 60 seconds after the lamp is turned on.

•By blinking red, the STATUS indicator indicates that the lamp should be replaced soon. Replace the lamp when the STATUS indicator blinks red. (See page 23 and 26.)

•Images may not be projected with good quality in an extremely hot or cold environment. (This is not a product malfunction.)

4.Adjust the focus by turning the focus ring.

5.Choose your desired external input source using the COM- PUTER or VIDEO button.

•The input source is switched from VIDEO to COMPUTER at the press of the COMPUTER button on the control panel.

•The input source is switched between VIDEO and S-VIDEO at every press of the VIDEO button on the control panel.

•If you use a remote controller, press the VIDEO or S-VIDEO button to directly switch to VIDEO or S-VIDEO.

•The projector automatically selects the appropriate signal format. The selected signal format is displayed on the screen.

•To avoid permanently imprinting a fixed image onto your pro- jector, please do not display the same stationary images for long period.

6.Adjust the image size by turning the zoom ring.

•If necessary, adjust the focus and zoom again.

•If you move the zoom, the screen will be out of focus. If this is the case, adjust the focus again.

EN-13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents SD206U Shock When using the projector in EuropeContents Important safeguards Do not look into the lens when the projector is operat- ing Do not keep using the damaged projectorDo not unplug the power cord during operation Place of installationControl panel Terminal board Overview11 13 Lamp cover Adjustment feet front Bottom side Remote controlBattery installation Remote controlOperation range of the remote control Layout of the projector InstallationFront projection Front projection, ceiling mountingProjector + AV device Basic connectionsProjector + DVD player or Hdtv decoder For computer with Mini D-SUB Projector + ComputerFor Macintosh After using the projector Adjustment of the projection anglePreparation Preparation for projectionBasic operation Power-onVolume from the speaker Power-offAnamorphic mode Instant Shut DownBasic operation Menu operationMenu operation Feature Image adjustment Image adjustmentColor temperature Simple adjustment method Adjustment of the image from the computerWhen the image flickers or the image is out of focus To move the image horizontallyStill Advanced featureTo resume the motion in the image Page-up and page-downTo cancel the password function Password functionTo enable the password function Reset of the lamp operation time Lamp replacementInterval of lamp replacement Images aren’t projected on the screen TroubleshootingImages aren’t projected correctly TroubleshootingCleaning of the projector and the ventilation slots MaintenanceCleaning of the lens OthersNormal condition IndicatorsAbnormal condition Kensington Lock SpecificationsDimensional drawings unit mm ConnectorsReplacement part What’s included in the boxEN-29 Mitsubishi Projector Contact Information

SD206U specifications

The Mitsubishi Electronics SD206U is a versatile and powerful projector designed to meet the demanding needs of corporate presentations, educational environments, and various other settings where high-quality visuals are essential. Renowned for its compact design and advanced features, the SD206U ensures that users can deliver impactful presentations with ease.

One of the standout features of the SD206U is its impressive brightness level, reaching up to 3,200 ANSI lumens. This high brightness capability ensures that visuals remain clear and vibrant even in well-lit rooms, making it suitable for various lighting conditions. Coupled with a high contrast ratio, the projector achieves deep blacks and bright whites, enhancing image quality for both video and presentations.

The projector utilizes DLP (Digital Light Processing) technology, known for its reliability and sharp image reproduction. This technology minimizes color distortion and provides excellent color accuracy, ensuring that images appear true to life. The SD206U supports a resolution of XGA (1024 x 768), making it effective for displaying detailed graphics, charts, and text.

Another significant aspect of the SD206U is its connectivity options. It is equipped with multiple input ports including HDMI, VGA, and composite video, allowing users to easily connect various devices such as laptops, Blu-ray players, and gaming consoles. This wide range of connectivity ensures compatibility with different media sources, accommodating the diverse needs of users.

In addition to its impressive visual capabilities, the SD206U features a long-lasting lamp life of approximately 5,500 hours in normal mode, extending to 10,000 hours in eco mode. This longevity reduces maintenance costs and enhances the usability of the projector over time. The projector also boasts a lightweight design, making it portable and easy to integrate into different environments.

The SD206U incorporates multimedia functionality, supporting various formats including JPEG for images and MPEG for video playback. This feature allows users to project media directly from USB drives, providing convenience without the need for additional hardware.

In summary, the Mitsubishi Electronics SD206U is a robust projector that excels in brightness, connectivity, and image quality. Its DLP technology, long lamp life, and user-friendly features make it an ideal choice for professionals and educators looking for a reliable solution for impactful presentations.
Top Page Image Contents