Mitsubishi Electronics XD211U user manual Menu operation

Menu operation

* Menus are not displayed when no signal is supplied to the projector.

Picture	Brightness*1
	Contrast*2
	Color Setting
	Keystone
	Aspect
	Image
	White Intensity*3 *4
	Gamma*3 *4

0 - 100

0 - 100

Red, Green, Blue

-20-+20

4:3, 16:9

PC, Movie, Standard, User

0 - 10

0 - 6

ENGLISH

Computer Image*6

Video Image*8

Tracking*5 *7	-50 - +50
Fine sync*5	0 - 31
H Position*5 *7	-10 - +10
V Position*5 *7	-10 - +10
Color*1 *2	0 - 100
Sharpness	0 - 31
Tint*9	0 - 100
	0%, 7.5%
Set up*10

Sound

Setting

Volume

Menu Position

Mounting

Logo

Signal Type*6

Lamp Time

Lamp Time Reset

Auto Power On

Auto Power Off

Auto Source

Lamp Mode

OSD Timeout

0 - 31

On, Off

RGB, YCbCr/YPbPr

Yes, No

Yes, No

Yes, No

Standard, Low

5, 15, 30, 45, 60 Sec

Language

Factory Default Yes, No

*1 Default setting varies depending on input signals.

*2 Available only when the input signal is PC or Video or S-Video 4/5 line component signal. *3 Setting value varies depending on the setting of Image.

*4 Only adjustable when Image setting is User.

*5 Adjustable range and default setting vary depending on signal type.

*6 Not available when the input signal is Video or S-Video.

*7 Only available when the input signal is PC.

*8 Not available when the input signal is PC.

*9 Only available when the input signal is Video / S-Video 480i 480p.

*10 Only available when input signal is NTSC.

Important:

•When the menu is turned on and the signal is lost or not input, the system will not search for the signal even if the signal is input again. In this case, turn off the menu.

•The setting will be saved even if the menu is closed.

•The setting will not be saved when the menu is closed in a no signal state.

EN-15