Mitsubishi Electronics XD250U-ST Preparation for projection, Using the adjustment feet front

Page 13

Preparation

Preparation for projection

1.Attach the provided power cord to the projector.

2.Plug the power cord in the wall outlet.

3.Remove the lens cap.

Warning:

•Do not look into the lens directly when the projector is on.

•The lens cap is for protecting the lens. If you leave the lens cap on the lens with the projector turned on, it may be deformed because of heat build-up. Remove the lens cap when you turn on the pro- jector.

•One of power cords for the U.S., Europe and U.K. is provided appropriately.

•This projector uses the power plug of three-pin grounding type. Do not remove the grounding pin from the power plug. If the power plug doesn’t fit your wall outlet, ask an electrician to change the wall outlet.

•In case that the power cord for the U.S is provided with this projec- tor, never connect this cord to any outlet or power supply using other voltages or frequencies than rated. If you want to use a power supply using other voltage than rated, prepare an appropri- ate power cord separately.

•Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.

•Do not place any objects on the power cord or do not place the projector near heat sources to prevent damage to the power cord. If the power cord should be damaged, contact your dealer for replacement because it may cause fire or electric shock.

•Do not modify or alter the power cord. If the power cord is modified or altered, it may cause fire or electric shock.

Caution:

•Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord.

•Do not plug in or out the power cord with your hand wet. It may cause electric shock.

Important:

•Install the screen on a flat wall at 90 degrees to the floor.

•Slanting the projector more than ±10° (right and left) or ±15° (front and rear) may cause trouble or explosion of the lamp. You can tilt the projector up to 8 degrees using the adjustment feet only.

•Images may not be projected in a shape of a regular rectangle or with its aspect ratio 4:3, depending on the installation conditions of the projector and the screen.

•When AUTO KEYSTONE in the INSTALLATION menu is set to ON, this projector automatically corrects vertical keystone distor- tion. For fine adjustment, press the KEYSTONE button on the remote control to display KEYSTONE, and adjust the image by

pressing the or ! button (or VOLUME or ! button) on the remote control.

In the following cases:

Press the !

Press the

button.

button.

•The automatic keystone adjustment may not be carried out cor- rectly because of the ambient temperature and the installation conditions of the projector and the screen. In such cases, correct the keystone manually.

•When the projector is projecting images where acceleration is present, such as in a vehicle and aircraft, the automatic keystone adjustment may not function correctly. In such a case, set AUTO KEYSTONE in the INSTALLATION menu to OFF and correct the keystone manually.

•You can correct the vertical keystones. However, their adjustment ranges are limited in such correction.

ENGLISH

Adjustment of the projection angle

For the best projection, project images on a flat screen installed at 90 degrees to the floor. If necessary, tilt the projector using the two adjustment feet on the bottom of the projector.

Using the adjustment feet (front)

1.Tilt up the projector to the appropriate angle.

2.Rotate the adjustment feet (front) for fine adjustment.

Important:

•When the keystone adjustment is carried out, the adjustment value is indicated. Note that this value doesn’t mean a projection angle.

•The allowable range of the adjustment value in the keystone adjustment varies depending on the installation conditions.

•When the keystone adjustment takes effect, the resolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns. They are not due to product malfunctions.

•Noise may appear on the screen during the keystone adjustment because of the type of the video signal being projected and the setting values of the keystone adjustment. In such cases, set the keystone adjustment values in the range where the image is dis- played without noise.

•When the keystone adjustment is carried out, the image may not be displayed correctly because of the type of input signal.

EN-13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents XD250U-ST Shock When using the projector in EuropeContents Important safeguards Do not look into the lens when the projector is operating Do not keep using the damaged projectorDo not unplug the power cord during operation Place of installationControl panel Terminal board OverviewKensington Lock Overview Bottom side Remote controlThis model does not Have these functionsBattery installation Remote controlOperation range of the remote control Ceiling Mount Installation InstallationLayout of the projector Projector + AV device Basic connectionsProjector + DVD player or Hdtv decoder Connection for video equipment having an Hdmi terminal Basic connectionsEquipment having an Hdmi terminal To Hdmi terminal HdmiProjector + Computer Using the adjustment feet front Adjustment of the projection anglePreparation Preparation for projectionWhen fine streaks are seen on projected images Power-onStatus Power Basic operationBasic operation Wall Screen When connecting to a laptop computerQuick Menu Basic operation Menu operationMenu Options Menu operationInformation menu Detail Menu Image menu Basic operationImage Advanced menu Advanced menu Installation menuFeature menu Singal menu Signal User menuNetwork menu MenuEN-24 Adjusting projected images Image adjustmentGamma mode Color EnhancerSimple method to adjust the image position Image adjustmentBrilliantColorTM LPF Progressive filterSetting Projector Name Network settingsNetwork Password Settings IP SettingsNetwork settings Glossary How to Use Network FunctionNumerical address to identify networked comput Password function Advanced featuresFreeze To cancel the password function Advanced featuresTo use the Magnify mode MagnifyMajor functions Supervising and controlling by computerConnection When the projector is mounted to the ceiling Lamp replacementInterval of lamp replacement Lamp replacementReset of the lamp operation time Power Status TroubleshootingNo image appears on the screen Images are not displayed correctly TroubleshootingLPF Cleaning of the projector and the ventilation slots MaintenanceCleaning of the lens OthersNormal condition IndicatorsAbnormal condition 4W when Standby Mode is LOW SpecificationsType DLP Data projector ModelConnectors SpecificationsDimensional drawings unit mm Replacement partCGA85 CGA84VGA60 VGA72Ver.1
Related manuals
Manual 10 pages 47.68 Kb Manual 42 pages 60.16 Kb Manual 2 pages 29.19 Kb

XD250U-ST specifications

The Mitsubishi Electronics XD250U-ST is a versatile and compact projector designed to meet the needs of various professional environments, including classrooms, conference rooms, and small theatres. With its remarkable features and advanced technologies, this projector offers exceptional performance and reliability.

At the core of the XD250U-ST is its impressive resolution. It boasts a native SVGA resolution of 800 x 600 pixels, providing clear and detailed images that are vital for presentations and educational purposes. The projector has a brightness rating of 2500 ANSI lumens, ensuring that even in well-lit rooms, your visuals remain vivid and easily visible. The contrast ratio of 2000:1 further enhances image quality, allowing for deeper blacks and brighter whites, making your content more engaging.

One of the standout features of the XD250U-ST is its ultra-short throw capability. This technology enables the projector to create a large display from a very short distance, reducing the need for extensive installation space. With a throw ratio of just 0.5:1, it can project a 100-inch image from only about 4 feet away. This makes it particularly suitable for smaller rooms where placement options might be limited.

The XD250U-ST also incorporates advanced color reproduction technologies. With Mitsubishi’s proprietary color management system, the projector delivers vibrant colors and accurate color separation. This ensures that presentations, videos, and images appear true to life, enhancing overall visual impact.

In addition to its performance characteristics, the XD250U-ST offers a variety of connectivity options. It comes equipped with multiple input ports, including VGA, HDMI, and composite video, allowing for easy connections to a wide range of devices such as laptops, DVD players, and document cameras. The inclusion of an RS-232 port also allows for integration with control systems, facilitating seamless use in automated environments.

The projector is designed with user convenience in mind. It features an intuitive interface, making navigation and setup straightforward. With its lightweight and portable design, the XD250U-ST can easily be transported between different locations, making it an ideal choice for mobile professionals.

In summary, the Mitsubishi Electronics XD250U-ST combines high-quality projection capabilities with user-friendly features and advanced technologies, making it a reliable choice for anyone looking to enhance their visual presentation experience. Its combination of brightness, resolution, ultra-short throw capabilities, and connectivity options ensures that it can meet the demands of various applications, from education to business environments.
Top Page Image Contents