Mitsubishi Electronics XD250U-ST Troubleshooting, No image appears on the screen, Power Status

Page 35

Troubleshooting

Before asking for repair of the projector, check the following. If the symptom persists, stop using the projector, be sure to unplug the power plug, and then contact your dealer.

No image appears on the screen.

Problem

Solution

 

 

Check whether the indicators are on or off and how they are lightning.

 

 

POWER

STATUS

Solution

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connect the power cord to the projector.

 

 

 

Off

 

Off

Plug the power cord into a wall outlet.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If any objects are blocking the air inlet or outlet grille, remove them and carry out

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the following.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Unplug the power cord from the wall outlet.

 

 

 

 

 

 

 

 

 

Off

2. Make sure that the projector has cooled off.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Plug the power cord into the wall outlet.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Press the POWER button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If any objects are blocking the air inlet or outlet grille, remove them.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Don't expose the air outlet grilles to hot air emitted from a heating appliance.

 

Power can not be turned on.

 

 

 

 

 

 

Blinking

 

 

Steady red

 

 

 

orange

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After the STATUS indicator stops blinking, press the POWER button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you unplug the power cord while the fan is rotating, the lamp may not turn on about 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinking

minute when you plug the power cord next time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

green

The lamp can't turn on again for 1 minute after it goes out.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the POWER button several times.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Attach the lamp cover on the top.

 

 

 

 

 

 

 

 

 

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Unplug the power cord from the wall outlet and contact your dealer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinking red

Steady

 

 

 

 

/ green

 

 

or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinking

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Cancel the AV mute by pressing the AV MUTE button.

 

• Check that the lens cap is removed.

 

• It may take about 1 minute for the lamp to light up.

 

• The lamp fails to light up on rare occasions. In such a case, wait for a few minutes and then try again.

 

• If the projector was turned off before the lamp was cooled down sufficiently last time, the fan may start rotat-

No image appears on the screen.

ing and the POWER button may not work after the power cord is plugged. After the fan stops rotating, press

the POWER button to turn back on the POWER indicator.

 

Check that the intake vent is clean.

Check that the lamp cover is closed. (See page 34.)

Check that the cables connected to the external devices are not broken.

When an extension cable is being used, replace it with the supplied cable for check.

When images are displayed correctly, add an RGB signal amplifier to the extension cable.

This problem may occur when the intake vent and/or exhaust vents are blocked. (In such a case, the STATUS

indicator brinks orange.)

Remove the objects blocking the intake vent and/or exhaust vents and then carry out the following proce-

 

 

dure.

 

1.

Wait for the intake fan and/or exhaust fan to stop. (Wait until the STATUS indicator goes out.)

Power turns off.

2.

Unplug the power cord from the wall outlet.

 

3.

Wait about 10 minutes.

 

4.

Plug the power cord into the wall outlet.

 

5.

Press the POWER button.

 

• Check that AUTO POWER OFF has been set to OFF.

 

• If the lamp has deteriorated, it may go out after a while it illuminates.

 

 

 

• PASSWORD FUNCTION in the FEATURE menu has been set to DISPLAY INPUT to enable the password

The screen for entering the password appears.

lock.

Enter the password or contact the person in charge of management of the projector.

 

 

 

(See page 30.)

 

 

 

• Turn on the power of the connected device, or check whether there is something wrong with the connected

 

device.

 

• Check whether the external device output signals. (Check this especially when the external device is a note-

 

book computer.)

"NO SIGNAL" is displayed.

• Check that the cable connected to the external device isn’t defective.

 

• Check that the projector is connected to the external device using the correct terminals.

 

• Check that the connected device is correctly selected as the input source.

 

• When an extension cord is being used, replace it with the supplied cable and check whether images are pro-

 

jected correctly. If images are projected correctly, use an RGB signal amplifier along with the extension cord.

ENGLISH

EN-35

Image 35
Contents XD250U-ST Shock When using the projector in EuropeContents Important safeguards Place of installation Do not keep using the damaged projectorDo not look into the lens when the projector is operating Do not unplug the power cord during operationKensington Lock OverviewControl panel Terminal board Have these functions Bottom side Remote controlOverview This model does notOperation range of the remote control Remote controlBattery installation Layout of the projector InstallationCeiling Mount Installation Projector + DVD player or Hdtv decoder Basic connectionsProjector + AV device Hdmi Basic connectionsConnection for video equipment having an Hdmi terminal Equipment having an Hdmi terminal To Hdmi terminalProjector + Computer Preparation for projection Adjustment of the projection angleUsing the adjustment feet front PreparationBasic operation Power-onWhen fine streaks are seen on projected images Status PowerBasic operation Wall Screen When connecting to a laptop computerQuick Menu Basic operation Menu operationInformation menu Menu operationMenu Options Detail Menu Image Advanced menu Basic operationImage menu Advanced menu Installation menuFeature menu Menu Signal User menuSingal menu Network menuEN-24 Color Enhancer Image adjustmentAdjusting projected images Gamma modeLPF Progressive filter Image adjustmentSimple method to adjust the image position BrilliantColorTMIP Settings Network settingsSetting Projector Name Network Password SettingsNetwork settings Numerical address to identify networked comput How to Use Network FunctionGlossary Freeze Advanced featuresPassword function Magnify Advanced featuresTo cancel the password function To use the Magnify modeConnection Supervising and controlling by computerMajor functions When the projector is mounted to the ceiling Lamp replacementReset of the lamp operation time Lamp replacementInterval of lamp replacement No image appears on the screen TroubleshootingPower Status LPF TroubleshootingImages are not displayed correctly Others MaintenanceCleaning of the projector and the ventilation slots Cleaning of the lensAbnormal condition IndicatorsNormal condition Model Specifications4W when Standby Mode is LOW Type DLP Data projectorReplacement part SpecificationsConnectors Dimensional drawings unit mmVGA72 CGA84CGA85 VGA60Ver.1
Related manuals
Manual 10 pages 47.68 Kb Manual 42 pages 60.16 Kb Manual 2 pages 29.19 Kb

XD250U-ST specifications

The Mitsubishi Electronics XD250U-ST is a versatile and compact projector designed to meet the needs of various professional environments, including classrooms, conference rooms, and small theatres. With its remarkable features and advanced technologies, this projector offers exceptional performance and reliability.

At the core of the XD250U-ST is its impressive resolution. It boasts a native SVGA resolution of 800 x 600 pixels, providing clear and detailed images that are vital for presentations and educational purposes. The projector has a brightness rating of 2500 ANSI lumens, ensuring that even in well-lit rooms, your visuals remain vivid and easily visible. The contrast ratio of 2000:1 further enhances image quality, allowing for deeper blacks and brighter whites, making your content more engaging.

One of the standout features of the XD250U-ST is its ultra-short throw capability. This technology enables the projector to create a large display from a very short distance, reducing the need for extensive installation space. With a throw ratio of just 0.5:1, it can project a 100-inch image from only about 4 feet away. This makes it particularly suitable for smaller rooms where placement options might be limited.

The XD250U-ST also incorporates advanced color reproduction technologies. With Mitsubishi’s proprietary color management system, the projector delivers vibrant colors and accurate color separation. This ensures that presentations, videos, and images appear true to life, enhancing overall visual impact.

In addition to its performance characteristics, the XD250U-ST offers a variety of connectivity options. It comes equipped with multiple input ports, including VGA, HDMI, and composite video, allowing for easy connections to a wide range of devices such as laptops, DVD players, and document cameras. The inclusion of an RS-232 port also allows for integration with control systems, facilitating seamless use in automated environments.

The projector is designed with user convenience in mind. It features an intuitive interface, making navigation and setup straightforward. With its lightweight and portable design, the XD250U-ST can easily be transported between different locations, making it an ideal choice for mobile professionals.

In summary, the Mitsubishi Electronics XD250U-ST combines high-quality projection capabilities with user-friendly features and advanced technologies, making it a reliable choice for anyone looking to enhance their visual presentation experience. Its combination of brightness, resolution, ultra-short throw capabilities, and connectivity options ensures that it can meet the demands of various applications, from education to business environments.