Mitsubishi Electronics XD221U user manual Installation menu

Menu operation (continued)

2. INSTALLATION menu

Menu option		Setting				Feature description
	OFF/BEIGE				/ LIGHT
	BLUE		/ LIGHT			Selects a desired setting based on the color of the screen or wall on
						which images are projected. (See page 15.) When selecting a setting
WALL SCREEN	GREEN			/ PINK
						/
						other than BLACK BOARD/WHITE BOARD, you can fine-tune the color
	BLACK BOARD/WHITE
	BOARD					tone to the desired level on the 1 to 5 scale.
	STANDARD					Select this setting when you want to view images in a well-lit room.
						Select this setting when you want to view images at a moderate light
LAMP MODE						intensity. The operating sound is consequently reduced, and the lamp
	LOW					lifetime becomes longer.
						• When this mode is switched, projected images may flicker.
						• If this mode is frequently switched, the lamp may be deteriorated.
	STANDARD					LAN and MONITOR OUT can be activated in STANDARD MODE.
STANDBY MODE
	LOW					Power consumption can be lowered when selecting LOW. However, LAN
						and MONITOR OUT cannot be activated.
						If AUTO is selected, selects AUDIO 1 when the input source is COM-
	AUTO					PUTER, while selects AUDIO 2 when the input source is VIDEO/S-
AUDIO INPUT						VIDEO.
	AUDIO 1/AUDIO 2					Select the audio input.
	MIX					Selects MIX signal of AUDIO 1 and AUDIO 2. You can change the bal-
						ance of AUDIO 1/AUDIO 2 using MIX	.
						When this mode is set to ON, the lamp is automatically lit when the
						power cord is plugged in the wall outlet. Select ON when you set the
AUTO POWER ON	ON/OFF					projector at the ceiling.
						• When the lamp is off, the projector is in standby. Use the remote
						control to turn on the lamp.
AUTO POWER OFF	OFF/5-60 min					Selects a desired timer setting until the projector enters the standby
						mode when there is no signal input from the source.
SPLASH SCREEN	ON/OFF					Select ON to display the splash screen when the projector is powered on.
BACK COLOR	BLUE/BLACK					Selects the background color that is displayed when there is no signal
						input from the source.
	OFF					Select this setting when you want to view images from the front with the
						projector set on the floor.
	MIRROR					Select this setting when you want to view images from behind the
						screen with the projector set on the floor.
IMAGE REVERSE
	INVERT					Select this setting when you want to view images from behind the
						screen with the projector set at the ceiling.
	MIRROR INVERT					Select this setting when you want to view images from the front with the
						projector set at the ceiling.
LAMP TIME RESET	OK					Resets LAMP TIME.

	opt.
INSTALLATION
	WALL SCREEN	BEIGE
	LAMP MODE	STANDARD
	STANDBY MODE	STANDARD
	AUDIO INPUT	AUTO
	AUTO POWER	OFF
	ON
	AUTO POWER	OFF
	OFF
ON	SPLASH	ON
	SCREEN
	BACK COLOR	BLUE
	IMAGE	OFF
	REVERSE
	LAMP TIME	OK
	RESET

•By default, the LAMP MODE is set to STANDARD. The LAMP MODE is set to either STANDARD or LOW depending on the setting last selected, and you cannot switch the LAMP MODE in about one minute after the lamp is on.

EN-20