Use correct voltage | Mitsubishi Electronics XD221U manual

WARNING:

Unplug immediately if there is something wrong with your projector.

Do not operate if smoke, strange noise or odor comes out of your pro- jector. It may cause fire or electric shock. In this case, unplug immedi- ately and contact your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in User Manual, do not attempt to service this product by yourself. Please contact your dealer when you want to fix, adjust, or inspect the projector.

Do not modify the projector.

It can lead to fire or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is damaged, unplug the projector and contact your dealer for inspection. It may lead to fire if you keep using the damaged projector.

Do not face the projection lens to the sun.

It can lead to fire.

Use correct voltage.

If you use incorrect voltage, it can lead to fire.

Do not place the projector on uneven surface.

Place the projector on a level and stable surface only.

Do not look into the lens when the projector is operating.

It may hurt your eyes. Never let children look into the lens when the projector is on.

Do not unplug the power cord during operation.

It can lead to lamp breakage, fire, electric shock or other trouble. Wait for the fan to stop before unplugging the power cord.

Do not touch the air outlet grilles and bottom plate.

Do not touch them or put other equipment close to the air outlet grilles because they become hot during operation. The heated air outlet grilles and bottom plate may cause injury or damage to other equip- ment. Also, do not put the projector on a desk that is easily affected by heat.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the projector, caus- ing deterioration in the projector quality and fire.

Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols near the projector.

Flammable substances may ignite causing fire or breakdown because the temperature inside the projector rises very high while the lamp is illuminating.

Do not use the projector with condensation on it.

It can lead to breakdown or other failure.

Place of installation

For safety’s sake, do not use the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as specified below.

•Operating temperature: between +41°F (+5°C) and +95°F (+35°C)

•Operating humidity: between 30% and 90%

•Never put any heat-producing device under the projector to pre- vent the projector from being overheated.

•Do not install the projector at a place that is unstable or subject to vibration.

•Do not install the projector near any equipment that produces a strong magnetic field. Also refrain from installing the projector near any cable carrying a large amount of current.

•Place the projector on a solid, vibration-free surface. Otherwise it may fall, causing serious injury or damage.

•Do not stand the projector on its end. It may fall, causing serious injury or damage.

•Slanting the projector more than ±10° (right and left) or ±15° (front and rear) may cause trouble or explosion of the lamp.

•Do not place the projector near air-conditioning unit, heater, or humidifier to avoid hot or moist air to the exhaust and ventilation hole of the projector.

Lamp replacement

Be sure to use the lamp attachment unit designed specifically for this projector when replacing the lamp with a new one. Lamp fragments may fall from the inside if the lamp were broken.

ENGLISH

Do not look into the air outlet grilles when projector is operating.

Heat, dust, etc. may blow out of them and hurt your eyes.

COMPLIANCE NOTICE OF FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen- erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm- ful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced Radio / TV technician for help.

Changes or modifications not expressly approved by Mitsubishi could void the user’s authority to operate this equipment.

COMPLIANCE NOTICE OF INDUSTRY CANADA

This Class B digital apparatus complies with Canadian ICES-003.

EN-5

XD221U specifications

The Mitsubishi Electronics XD221U is a remarkable projector that offers an impressive combination of high-quality imaging, advanced technologies, and user-friendly features, making it a popular choice for various settings, including business presentations, educational environments, and home entertainment.

One of the standout features of the XD221U is its brightness capability. With a high lumen output, this projector delivers clear and vibrant images even in well-lit rooms. This makes it particularly suitable for classrooms and conference rooms where ambient light can be a challenge. The projector utilizes 3LCD technology, which ensures rich color reproduction and sharp details. The 3LCD system enables the XD221U to produce both vivid colors and deep blacks, improving overall image quality.

The resolution of the XD221U is XGA (1024 x 768), making it ideal for displaying standard office documents, presentations, and videos. The aspect ratio of 4:3 is well-suited for traditional content formats and provides a good viewing experience. Additionally, the projector supports various input options, including VGA, HDMI, and RCA, making it versatile and compatible with most modern devices such as laptops, tablets, and DVD players.

Portability is another key characteristic of the XD221U. Designed with mobility in mind, it is lightweight and compact, making it easy to transport from one location to another. This portability ensures that users can set up presentations or screenings quickly, enhancing productivity in professional environments.

Mitsubishi Electronics has also integrated several helpful features into the XD221U to enhance user experience. The projector includes an automatic vertical keystone correction feature, which helps to adjust the image automatically when the projector is not perfectly aligned with the screen. This allows for a more straightforward setup and consistent image quality, regardless of projector placement.

Another notable attribute is the long lamp life, which reduces the need for frequent replacements and lowers total cost of ownership. Users can expect a substantial hours of usage before needing to change the lamp, contributing to its appeal for businesses and schools.

In summary, the Mitsubishi Electronics XD221U is a versatile projector that excels in delivering bright, high-quality images and offers a range of features designed for comfort and convenience. Its advanced 3LCD technology, XGA resolution, and ease of use make it a strong candidate for anyone in need of a reliable and effective projection solution.