Mitsubishi Electronics XD280U-G, XD250U-G Menu operation, Menu Options, Information menu

Menu operation (continued)

Menu Options

Set the following options provided in the respective menus.

1. QUICK MENU

Menu option	Setting	Feature description
	AUTO	Automatically sets an optimal color balance based on the input signal.
		Use this setting for most cases.
COLOR ENHANCER	PRESENTATION	Makes projected images bright and crisp.
	STANDARD	Makes projected images look natural.
	THEATER	Makes projected images soft and smooth. Best suited for movies.
	USER	Reflected by the value set in IMAGE menu. (See page 25.)
CONTRAST	±30	Adjusts the contrast of projected images. (See page 25.)
BRIGHTNESS	±30	Adjusts the brightness of projected images. (See page 25.)
		Adjusts the color temperature. You cannot select this setting when
COLOR TEMP.	4 options	WALL SCREEN in the INSTALLATION menu is set to a setting other
		than OFF. (See page 25.)
SHARPNESS	±5	Adjusts the sharpness of projected images. (See page 25.)
	STANDARD	Select this setting when you want to view images in a well-lit room.
		Select this setting when you want to view images at a moderate light
LAMP MODE		intensity. The operating sound is consequently reduced, and the lamp
	LOW	lifetime becomes longer.
		• When this mode is switched, projected images may flicker.
		• If this mode is frequently switched, the lamp may be deteriorated.
	NORMAL	Automatically sets the aspect ratio in relative to the input signal. Use this
		setting for most cases.
ASPECT	16:9	Selects a desired screen position for anamorphically squeezed or hori-
		zontally compressed images stored on DVD disks.
	FULL	Select this setting when you want to project images in the full screen.
USER MENU		Displays the menu item selected in SELECT USER MENU.
SELECT USER MENU		Select the item to display in USER MENU.
DETAIL MENU		Moves to DETAIL MENU.

QUICK MENU
COLOR	AUTO
ENHANCER
CONTRAST	0
BRIGHTNESS	0
COLOR TEMP.	STANDARD
SHARPNESS	0
LAMP MODE	STANDARD
ASPECT	NORMAL
USER MENU
SELECT	COLOR
USER MENU
DETAIL MENU	OK

•You cannot adjust COLOR TEMP. when WALL SCREEN is set to other than OFF.

•When COLOR ENHANCER is switched, projected images may be distorted.

•By default, the LAMP MODE is set to STANDARD. The LAMP MODE is set to either STANDARD or LOW depending on the setting last selected, and you cannot switch the LAMP MODE in about one minute after the lamp is on.

2. INFORMATION menu

Menu option	Feature description
	This menu shows a lamp operating time (hour) calculated assuming that LAMP MODE is LOW.
	• When the LAMP MODE is STANDARD, this menu shows a longer lamp operating time than
	the actual time. (See page 34 for the interval of lamp replacement.)
LAMP TIME (LOW)	• When the lamp operating time is 0 to 10 hours, "0H" is displayed. When the lamp operating
	time exceeds 10 hours, the actual hours are displayed.
	• When the lamp operating time reaches 3750 hours, the bar turns yellow. When it reaches
	4750 hours, the bar turns red.
	(The lamp lifetime is 6000 hours.)
INPUT	Indicates the name of the terminal to which the currently projected video signal is being input.
RESOLUTION	Indicates the resolution of the currently projected video signal.
VERTICAL FREQUENCY	Indicates the vertical frequency of the currently projected video signal.
HORIZONTAL FRE-	Indicates the horizontal frequency of the currently projected video signal.
QUENCY
SYNC. TYPE	Indicates the type of the sync signal for the currently projected video signal.

INFORMATION
	LAMP TIME (LOW)	0 H
	INPUT	COMPUTER2
	RESOLUTION	1024x768
	VERTICAL	75.04 Hz
	FREQUENCY
	HORIZONTAL	60.02 KHz
	FREQUENCY
R G	B
H V	SYNC. TYPE	5wire

EN-18