Mitsubishi Electronics SL1U user manual Basic connections, Projector + AV equipment

Page 10

Basic connections

This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players.

Important:

•Make sure that your equipment is turned off before connection.

•Plug in firmly and unplug by holding the plug, not by pulling the AC power cord.

•If connected units are set too close to one another, the image may be affected.

•Refer to the user manual of each component for details of connections.

Projector + AV equipment

Important:

•Match the color of video and audio plugs on the AV cable with the connections.

RS-232C		S-VIDEO	to S-video input
	L	MAIN	to S-video input
	L
COMPUTER IN	R		to video input
	R		to video input
		VIDEO
		AC IN
	AUDIO IN VIDEO IN		to audio input
COMPUTER OUT			to audio input

to audio output to video output

VCR etc.	to S-video output

•Speaker output is mono.

•Select AUDIO MODE VIDEO to hear and to sound for the VIDEO. (Refer to page 16).

Projector + DVD player or HDTV decoder

Some DVD players have output terminal for 3 line fitting (Y, CB, CR). When connecting them to the projector, connect to COMPUTER IN of the projector.

DVD player or HDTV decoder

AUDIO cable

to AUDIO IN

Y CB(PB) CR(PR)	to AUDIO OUT

BNC - RCA connector (optional)

No connection

G	B	R	HD/CS	VD

to COMPUTER

IN

Mini D-SUB 15 pin-BNC conversion cable (optional)

RS-232C	S-VIDEO
L	MAIN

COMPUTER IN

R

VIDEO

AC IN

AUDIO IN VIDEO IN

COMPUTER OUT

•Y, PB, PR is an example of the terminal names for a HDTV decoder.

•The terminal name is different depending on the connected equipment.

•Use mini D-SUB 15 pin-BNC conversion cable for connection.

•Some DVD players may not project the image correctly.

•When connecting with HDTV equipment which has R, G, B output, set RGB for the COMPUTER INPUT in the SIGNAL setting menu.

•Change the setting in the SIGNAL menu, when 525p signal is inputted. (Refer to page 27).

EN – 10

Image 10

Contents LCD Model SL1UWhen using the projector in Europe Compliance NoticeContents Important safeguards Do not modify this equipment Clean the air-filter once a monthNever remove the cabinet If you break or drop the cabinetOverview Control panelLamp cover Adjustment foot Bottom sideBattery installation Using the remote controlOperation area Orientation of the projector InstallationScreen Projector + AV equipment Basic connectionsProjector + DVD player or Hdtv decoder For using Macintosh Projector + Personal computerPreparing the projector for operation Adjusting the angle of projectionGetting ready for projection Focus ring To operate projector power onLamp Power Zoom ringTurning off the projector Volume from the speakerAnamorphic mode Sound from the speakerBasic operation Menu operationOFF Slightly, select 1. When using this projector in a normally When sRGB is ON, Color MATRIX, can’t be adjustedThis projector in a room where the light and shade varies Lighted room, select 2. When using this projector in a roomInitialite the setting which has been changed Default User memory for signal settingMemorizing the setting Select the user settingColor temperature Picture adjustmentAdjusting the image Color matrixAdjustment from personal computer Real screen display Advanced features for presentationExpand StillInterval of the lamp replacement Lamp replacementHow to reset the operation time meter Cleaning the lens MaintenanceCleaning the air-filter Cleaning the projector and the ventilation grilleTroubleshooting Unusual temperature IndicatorsTemp indicator Normal conditionSpecifications Replacement part Option / Not included in the box ConnectorsDimensional drawings mm What’s included in the boxCGA70 871D341A60 Interface Control projector by using a personal computerControl command diagram ConnectionHow to set the grade Operation commandsVolume commands Control sequenceMenu setting commands Remote commandsReading command diagram Example Display Menu selection bar. is for Ascii codeExample 1 Set the Auto Power on to on