Mitsubishi Electronics SL1U Number increases, Reproducibility, Select OFF, Iris won’t operate

COLOR TEMP.

Menu operation (continued)

1IMAGE

CONTRAST ......... Adjusts the picture contrast. The contrast becomes higher as the	opt.
		XGA60
number increases.
BRIGHTNESS ..... Adjusts the image brightness. The image becomes brighter as	IMAGE
the number increases.	CONTRAST	0
sRGB .................... Select ON to display an image emphasizing on the color	BRIGHTNESS	0
reproducibility.	sRGB	OFF
• When sRGB is ON, COLOR MATRIX, can’t be adjusted.	COLOR MATRIX	COMPUTER

•When sRGB is ON, the image will become darker.

STANDARD

•When COLOR TEMP is set to other than STANDARD

		COLOR	0
	while sRGB is ON, colors won’t be reproduced as per
		TINT	0
	the standard value of sRGB.
		SHARPNESS	0
	• Though sRGB can be ON while a signal is input from
	VIDEO-IN or S-VIDEO IN, reproduced colors won’t be
	in accordance with the sRGB standard value. Use sRGB to suit your color preference.
COLOR MATRIX	Adjusts the color balance in each color of the image. See page 18.
COLOR TEMP	Adjusts the color temperature. See page 18.
COLOR	Adjusts the color intensity of the image. (Available only when VIDEO is selected as the source.)
TINT	Adjusts the color balance of the image. The color balance of the image shifts green as the number
	increases and shifts to purple as the number decreases. (Available only when VIDEO is selected as the
	source.)

•When the TV50 (PAL, SECAM) signal is inputted, TINT can’t be adjusted. SHARPNESS ....... Adjusts the image sharpness. The image sharpness rises as the number increases.

2INSTALLATION

IRIS ...................... Adjusts the sensitivity of the function (IRIS) which				opt.	XGA60
automatically adjusts the brightness and contrast of the image
depending on the degree of the light in the room. When using	INSTALLATION
this projector in a room where the light and shade varies			IRIS		OFF
slightly, select 1. When using this projector in a normally			KEYSTONE		0˚
lighted room, select 2. When using this projector in a room			AUTO POWER		OFF
where the light and shade varies greatly, select 3.When you			ON
			AUTO POWER		OFF
select OFF, IRIS won’t operate.			OFF
			SPLASH SCREEN		ON
		ON
• When the sensitivity is adjusted in a large amount, the
image may be displayed solid white. Adjust the			BACK COLOR		BLUE
sensitivity depending on the operating environment			LAMP MODE		STANDARD
and imges to be displayed.			IMAGE REVERSE		OFF

KEYSTONE ......... Corrects keystone distortion. Select an optimum value for

proper display. For normal use, select 0˚.

AUTO POWER ON ...... Select ON to boot up the projector automatically by turning on an externally connected power switch

such as a breaker even when the main power switch of the projector is off. Use this setting when the projector is hanging from the ceiling.

	• The projector will be in the stand-by mode when the lamp is off. Use the remote control to turn
	on the lamp.
AUTO POWER OFF ....	Set the time elapsed before the projector enters into the stand-by mode when there is no signal
	inputted from the selected source.
SPLASH SCREEN	Select ON to display the splash screen when the power is turned ON.
BACK COLOR	Use to select the color of the background, blue or black, which will be displayed when there is no signal
	inputted from the selected source.
LAMP MODE	Use to change the brightness of the lamp. When LOW is selected, the image will become darker,
	though the power will be saved, operating sound will be reduced.

•The brightness of the lamp will be STANDARD for 3 minutes regardless of the setting of the LAMP MODE when the lamp turns on.

•When the LAMP MODE is changed, the screen may flicker. This is not a failure of the lamp. IMAGE REVERSE ...... Use to reverse or invert the projected image. Select MIRROR in rear projection. Select MIRROR,

INVERT in rear projection with the projector hanging from the ceiling.

3FEATURE

MENU POSITION ....... Use to select the position of the menu on the screen, (upper

left) or (lower right).

EXPAND MODE .. Select the mode for enlarging screen. See page 20.

AUDIO MODE ..... Select COMPUTER to output the sound which is inputted to

the audio input terminal when COMPUTER is selected as the

opt.

FEATURE

MENU POSITION

AEXPAND MODE

A

XGA60

1.

1.

source. Select VIDEO to output the sound which is inputted to the audio input terminal when VIDEO is selected as the source. Select COMPUTER VIDEO mode to always output the sound which is inputted to the audio input terminal. Select MUTE not

?

AUDIO MODE

VIDEO SIGNAL

ANAMORPHIC

COMPUTER

VIDEO

AUTO

OFF

to output the sound at all.

AË LANGUAGE RESET ALL

English

OK

EN – 16