Onkyo TX-SR8350, TX-SR503 Use the Down button to, Left and Right / but- tons to select 2ch or 1ch

Page 33

First Time Setup—Continued

5

6

7

Use the Down [ ] button to select “Center,” and then use the Left and Right []/[ ] buttons to

select Small, Large, or None.

Small: Select if the center speaker is small.

Large: Select if the center speaker is large.

None: Select if no center speaker is connected.

Note:

•If the Front setting in step 4 is set to Small, the Large option cannot be selected.

Use the Down [ ] button to select “Surround,” and then use the Left and Right []/[ ] but- tons to select Small, Large, or None.

Small: Select if the surround speak- ers are small.

Large: Select if the surround speak- ers are large.

None: Select if no surround speakers are connected.

Note:

•If the Front setting in step 4 is set to Small, the Large option cannot be selected.

Use the Down [

] button to

select “Surr Back,” and use the

Left and Right [

]/[ ] buttons to

select Small, Large, or None.

Small: Select if the surround back speakers are small.

Large: Select if the surround back

speakers are large.

None: Select if no surround back speakers are connected.

Notes:

•If the Surround setting in step 6 is set to None, this setting does not appear.

•If the Surround setting in step 6 is set to Small, the Large option cannot be selected.

8

Use the Down [ ] button to

 

select “Surr Back Ch,” and use

the Left and Right []/[ ] but- tons to select 2ch or 1ch.

2ch: Select if two (left and right) surround back speakers are connected.

1ch: Select if one surround back

speaker is connected.

Note:

•If the Surround and Surr Back set- tings in steps 6 and 7 are set to None, this setting does not appear.

9Press the [SETUP] button.

Setup closes.

TESTING THE SPEAKERS

To test that all of the speakers are working properly,

press the remote controller’s [TEST TONE] but-

ton. The test tone will be output by each speaker in turn and the name of each speaker will appear on the display. To turn off the test tone, press the [TEST TONE] button again.

•If the test tone is not produced by a speaker, or it’s produced by a speaker other than that shown on the display, you may have wired the speakers incorrectly and you should check your connec- tions (see page 17).

•If the test tone is not produced by a speaker and its name does not appear on the display, you may have set the speaker settings incorrectly (see page 32).

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents TX-SR503 TX-SR503E TX-SR8350 Avis Important Safety InstructionsPower PrecautionsSupplied Accessories PrecautionsSpeaker cable labels Table of Contents FeaturesFront Panel Front & Rear PanelsDisplay Front & Rear PanelsRear Panel Setting the Voltage Selector on some models Before Using the AV receiverInstalling the Batteries Using the Remote ControllerHow to Use the Remote Controller Remote ControllerReceiver Mode ReceiverRemote Controller DVD DVD ModeCDR CD/MD/CDR ModeTape Mode TV Control ButtonsTV Input Enjoying Home Theater Connecting Your SpeakersSpeaker Connection Precautions Connecting Your SpeakersSpeaker Configuration Attaching the Speaker LabelsConnecting a Powered Subwoofer Connecting Speaker Set aConnecting Speaker Set B Speaker Set BConnecting the Indoor FM Antenna Connecting AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor FM Antenna Connecting AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterAbout AV Connections Connecting Your ComponentsOptical Digital Jacks AV Connection Color CodingConnecting Both Audio & Video Connecting Your ComponentsWhich Connections Should I Use? Video Connection FormatsConnecting a TV or Projector Video ConnectionAudio Connection Connect one or the other Connecting a DVD playerConnecting a VCR or DVD Recorder for Playback DVD recorderOr the other Connecting a VCR or DVD Recorder for Recording Connecting a Camcorder, Games Console, or Other DeviceCamcorder, games console, etc Video source Connection TX-SR503/503E/8350CD Player, or Turntable with Built-in Phono Preamp Step Connecting a CD Player or TurntableTurntable MM with built-in phono preamp Phono Preamp MC head amp or MC transformerConnecting the Power Cord of Another Component Connecting a Cassette, CDR, MiniDisc, or DAT RecorderConnecting the Power Cord Connecting Onkyo ComponentsAuto Power On/Standby Direct ChangeTurning On the AV Receiver Turning OnSmooth Operation in a Few Easy Steps Have you connected a component to a digital audio input?First Time Setup Assigning Digital Inputs to Input SourcesChanging the TAPE/MD/CDR Display Minimum Speaker Impedance Setup not North American model First Time SetupTesting the Speakers Press the Setup buttonUse the Down button to Left and Right / but- tons to select 2ch or 1chPlaying Your AV Components Select a suitable listening mode and enjoyBasic AV Receiver Operation Start playback on the source componentUsing the Multichannel Input Playing Your AV ComponentsDisplaying Source Information Tuning into Radio Stations Using the TunerAM Frequency Step Setup Not North America and Europe Listening to the RadioPresetting Radio Stations Using the TunerSelecting Preset Stations Deleting PresetsUsing RDS European models only What is RDS?Program Types Used in Europe PTY Finding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP EnterenterSetting the Display Brightness Adjusting the Bass & TrebleCommon Functions Muting the AV ReceiverUsing Headphones Using the Sleep TimerAdjusting Speaker Levels Common FunctionsSelecting Listening Modes Using the Listening ModesPCM*1 Using the Listening ModesAbout the Listening Modes Onkyo Original DSP Modes Using the Late Night Function Dolby Digital only Adjusting the Listening ModesUsing the CinemaFILTER Using the Audio Adjust FunctionsInput Channel Settings Adjusting the Listening ModesPL II & PL IIx Music Mode Settings DTS Neo6 Music Mode SettingRecording Camcorder Video signal audio signalRecording the Input Source Recording from Different AV SourcesAdvanced Speaker Settings Advanced SetupCrossover Frequency Double BassSpeaker Distance Advanced SetupSpeaker Levels Right Buttons toDigital Input Signal Formats Controlling Other Components Entering Remote Control CodesResetting the Remote Mode Buttons Remote Control Codes for Onkyo Components Connected viaResetting the Remote Controller Controlling Other ComponentsTV VOL CLR ON, STANDBY, TV ON, StandbyCH + PreviousTroubleshooting Troubleshooting Sound changes when I connect my head- phones? Remote controller doesn’t work?Can’t control other components? Can’t record?Amplifier Section SpecificationVideo Section Tuner SectionMemo Onkyo Europe UK Office Onkyo Europe Electronics GmbHPage Page Page Page Page Page Page Page Page Page Page Page Page Page

TX-SR503E, TX-SR503, TX-SR8350 specifications

The Onkyo TX-SR8350, TX-SR503, and TX-SR503E represent a trio of high-performance A/V receivers that cater to audiophiles and home theater enthusiasts alike. Each model offers unique features and characteristics, ensuring an immersive audio and visual experience.

Starting with the Onkyo TX-SR8350, it's known for its robust power output, delivering 100 watts per channel to ensure dynamic sound across all frequencies. This model includes an advanced Dolby Pro Logic II decoder, enabling listeners to enjoy rich, multi-dimensional audio from stereo recordings. Additionally, the TX-SR8350 supports both DTS and Dolby Digital 5.1 formats, providing detailed sound staging for movie enthusiasts. Its comprehensive connectivity options, including multiple HDMI inputs and component video inputs, make it a versatile choice for modern home entertainment systems. The receiver's integration with Onkyo's proprietary technology enhances video quality, ensuring that high-definition sources are presented with clarity and precision.

The TX-SR503 offers a slightly more compact solution while still preserving many of the features that make Onkyo receivers stand out. With a power output of 75 watts per channel, this model supports a range of surround sound formats, including Dolby Digital and DTS, making it perfect for small to medium-sized rooms. The receiver is equipped with Audyssey 2EQ automatic room calibration technology, which optimizes speaker placement and performance for an enhanced auditory experience tailored to the listener’s space. The TX-SR503’s user-friendly interface and intuitive setup process appeal to both seasoned audio enthusiasts and those just beginning their home theater journey.

The TX-SR503E, while similar to the TX-SR503, is designed for European markets and includes additional features that cater specifically to that audience. It meets the rigorous European safety and performance standards while maintaining the core functionalities and sound quality of its counterpart. Features like stereo pre-outs make it easier for users to integrate additional amplification or powered speakers, enhancing overall audio fidelity.

Together, the Onkyo TX-SR8350, TX-SR503, and TX-SR503E showcase a commitment to quality sound performance, diverse connectivity options, and user-friendly technology. Whether you are building a full home theater system or just want an upgrade from standard audio equipment, these receivers are equipped to deliver outstanding listening experiences tailored to various preferences and environments. With Onkyo’s reputation for high fidelity and reliability, these models stand out as excellent choices for music and movie lovers.
Top Page Image Contents