Onkyo TX-SR503E, TX-SR8350 Controlling Other Components, Resetting the Remote Mode Buttons

Page 53

Controlling Other Components—Continued

Remote Control Codes for Onkyo Components Connected via

Onkyo components that are connected via can be controlled by pointing the remote controller at the AV receiver. This means that you can control such compo- nents even if they are out of sight, for example, installed in a rack.

1Make sure the Onkyo component is con-

nected with an cable and an analog audio cable (RCA).

See page 29 for details.

2Enter the appropriate remote control code for the [DVD] or [CD] REMOTE MODE but- ton.

[DVD] REMOTE MODE button 1612: DVD player with [CD] REMOTE MODE button

1327: CD player with

1808: MD recorder with

1322: CD recorder with

See the previous page for information on entering remote control codes.

3Press the [DVD] or [CD] REMOTE MODE button, point the remote controller at the AV receiver, and operate the component.

If you want to control an Onkyo component by pointing the remote controller directly at it, or you want to control

an Onkyo component that’s not connected via , enter the following remote control codes:

[DVD] REMOTE MODE button

0627: DVD player without (default) [CD/MD/CDR] REMOTE MODE button

1817: CD player without (default)

0868: MD recorder without

1323: CD recorder without

Note:

If you connect an -compatible Onkyo MiniDisc or CD recorder to the TAPE IN/OUT jacks, for remote operation to work properly, you must set the display to MD or CDR (see page 31).

Resetting the REMOTE MODE Buttons

If you’ve previously entered a code for a REMOTE MODE button but now want to reset it, perform the fol- lowing procedure.

1While holding down the REMOTE MODE button that you want to

reset, press the [L NIGHT] button for 3 seconds.

The REMOTE MODE button lights up.

2Press the REMOTE MODE button again.

The REMOTE MODE button is reset and flashes twice.

The [DVD] and [CD] REMOTE MODE buttons are preprogrammed with remote control codes for control- ling Onkyo components. When one of these buttons is reset, the prepro- grammed code is restored.

Resetting the Remote Controller

You can reset the remote controller to its default settings.

1While holding down the

[RECEIVER] button, press the [L NIGHT] button for 3 seconds.

The [RECEIVER] button lights up.

2Press the [RECEIVER] button

again.

The remote controller is reset and the [RECEIVER] button flashes twice.

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents TX-SR503 TX-SR503E TX-SR8350 Avis Important Safety InstructionsPower PrecautionsSpeaker cable labels Supplied AccessoriesPrecautions Table of Contents FeaturesFront Panel Front & Rear PanelsDisplay Front & Rear PanelsRear Panel Setting the Voltage Selector on some models Before Using the AV receiverInstalling the Batteries Using the Remote ControllerHow to Use the Remote Controller Remote ControllerReceiver Mode ReceiverRemote Controller DVD DVD ModeCDR CD/MD/CDR ModeTV Input Tape ModeTV Control Buttons Enjoying Home Theater Connecting Your SpeakersSpeaker Connection Precautions Connecting Your SpeakersSpeaker Configuration Attaching the Speaker LabelsConnecting a Powered Subwoofer Connecting Speaker Set aConnecting Speaker Set B Speaker Set BConnecting the Indoor FM Antenna Connecting AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor FM Antenna Connecting AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterAbout AV Connections Connecting Your ComponentsOptical Digital Jacks AV Connection Color CodingConnecting Both Audio & Video Connecting Your ComponentsWhich Connections Should I Use? Video Connection FormatsAudio Connection Connecting a TV or ProjectorVideo Connection Connect one or the other Connecting a DVD playerOr the other Connecting a VCR or DVD Recorder for PlaybackDVD recorder Camcorder, games console, etc Connecting a VCR or DVD Recorder for RecordingConnecting a Camcorder, Games Console, or Other Device Video source Connection TX-SR503/503E/8350CD Player, or Turntable with Built-in Phono Preamp Step Connecting a CD Player or TurntableTurntable MM with built-in phono preamp Phono Preamp MC head amp or MC transformerConnecting the Power Cord of Another Component Connecting a Cassette, CDR, MiniDisc, or DAT RecorderConnecting the Power Cord Connecting Onkyo ComponentsAuto Power On/Standby Direct ChangeTurning On the AV Receiver Turning OnSmooth Operation in a Few Easy Steps Have you connected a component to a digital audio input?Changing the TAPE/MD/CDR Display First Time SetupAssigning Digital Inputs to Input Sources Minimum Speaker Impedance Setup not North American model First Time SetupTesting the Speakers Press the Setup buttonUse the Down button to Left and Right / but- tons to select 2ch or 1chPlaying Your AV Components Select a suitable listening mode and enjoyBasic AV Receiver Operation Start playback on the source componentDisplaying Source Information Using the Multichannel InputPlaying Your AV Components Tuning into Radio Stations Using the TunerAM Frequency Step Setup Not North America and Europe Listening to the RadioPresetting Radio Stations Using the TunerSelecting Preset Stations Deleting PresetsProgram Types Used in Europe PTY Using RDS European models onlyWhat is RDS? Finding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP EnterenterSetting the Display Brightness Adjusting the Bass & TrebleCommon Functions Muting the AV ReceiverUsing Headphones Using the Sleep TimerAdjusting Speaker Levels Common FunctionsSelecting Listening Modes Using the Listening ModesPCM*1 Using the Listening ModesAbout the Listening Modes Onkyo Original DSP Modes Using the Late Night Function Dolby Digital only Adjusting the Listening ModesUsing the CinemaFILTER Using the Audio Adjust FunctionsInput Channel Settings Adjusting the Listening ModesPL II & PL IIx Music Mode Settings DTS Neo6 Music Mode SettingRecording Camcorder Video signal audio signalRecording the Input Source Recording from Different AV SourcesAdvanced Speaker Settings Advanced SetupCrossover Frequency Double BassSpeaker Distance Advanced SetupSpeaker Levels Right Buttons toDigital Input Signal Formats Controlling Other Components Entering Remote Control CodesResetting the Remote Mode Buttons Remote Control Codes for Onkyo Components Connected viaResetting the Remote Controller Controlling Other ComponentsTV VOL CLR ON, STANDBY, TV ON, StandbyCH + PreviousTroubleshooting Troubleshooting Sound changes when I connect my head- phones? Remote controller doesn’t work?Can’t control other components? Can’t record?Amplifier Section SpecificationVideo Section Tuner SectionMemo Onkyo Europe UK Office Onkyo Europe Electronics GmbHPage Page Page Page Page Page Page Page Page Page Page Page Page Page

TX-SR503E, TX-SR503, TX-SR8350 specifications

The Onkyo TX-SR8350, TX-SR503, and TX-SR503E represent a trio of high-performance A/V receivers that cater to audiophiles and home theater enthusiasts alike. Each model offers unique features and characteristics, ensuring an immersive audio and visual experience.

Starting with the Onkyo TX-SR8350, it's known for its robust power output, delivering 100 watts per channel to ensure dynamic sound across all frequencies. This model includes an advanced Dolby Pro Logic II decoder, enabling listeners to enjoy rich, multi-dimensional audio from stereo recordings. Additionally, the TX-SR8350 supports both DTS and Dolby Digital 5.1 formats, providing detailed sound staging for movie enthusiasts. Its comprehensive connectivity options, including multiple HDMI inputs and component video inputs, make it a versatile choice for modern home entertainment systems. The receiver's integration with Onkyo's proprietary technology enhances video quality, ensuring that high-definition sources are presented with clarity and precision.

The TX-SR503 offers a slightly more compact solution while still preserving many of the features that make Onkyo receivers stand out. With a power output of 75 watts per channel, this model supports a range of surround sound formats, including Dolby Digital and DTS, making it perfect for small to medium-sized rooms. The receiver is equipped with Audyssey 2EQ automatic room calibration technology, which optimizes speaker placement and performance for an enhanced auditory experience tailored to the listener’s space. The TX-SR503’s user-friendly interface and intuitive setup process appeal to both seasoned audio enthusiasts and those just beginning their home theater journey.

The TX-SR503E, while similar to the TX-SR503, is designed for European markets and includes additional features that cater specifically to that audience. It meets the rigorous European safety and performance standards while maintaining the core functionalities and sound quality of its counterpart. Features like stereo pre-outs make it easier for users to integrate additional amplification or powered speakers, enhancing overall audio fidelity.

Together, the Onkyo TX-SR8350, TX-SR503, and TX-SR503E showcase a commitment to quality sound performance, diverse connectivity options, and user-friendly technology. Whether you are building a full home theater system or just want an upgrade from standard audio equipment, these receivers are equipped to deliver outstanding listening experiences tailored to various preferences and environments. With Onkyo’s reputation for high fidelity and reliability, these models stand out as excellent choices for music and movie lovers.
Top Page Image Contents