6) Keystone commands (Not executable in
The keystone commands are used for the keystone setting of this projector with the value. The value will vary depending on the installation conditions, etc.)
ITEM | ASCII |
|
| HEX | VALUE |
KEYSTONE (vertical) | KS | 4Bh | 53h |
| ±35 |
KEYSTONE (horizontal) | KSH | 4Bh | 53h | 48h | ±25 |
How to set the value
Use the ASCII or HEX code as shown below to set the value.
ASCII | ‘+’ | ‘0’ | ‘1’ | ‘2’ | ‘3’ | ‘4’ | ‘5’ | ‘6’ | ‘7’ | ‘8’ | ‘9’ | |
HEX | 2Bh | 2Dh | 30h | 31h | 32h | 33h | 34h | 35h | 36h | 37h | 38h | 39h |
7) Mute commands (Not executable in
The mute commands are used for the mute setting of this projector with the 0 (30h) and 1 (31h).
ITEM | ASCII | HEX | VALUE |
MUTE | MUTE | 4Dh 55h 54h 45h | 0 (OFF), 1 (ON) |
8)Remote commands (Not executable in
Some remote control operations can be achieved by the remote command codes. The remote commands have no data codes.
Button’s name on remote | ASCII |
|
| HEX |
+ VOLUME | r06 | 72h | 30h | 36h |
- VOLUME | r07 | 72h | 30h | 37h |
KEYSTONE | r43 | 72h | 34h | 33h |
EXPAND | r02 | 72h | 30h | 32h |
PinP | r04 | 72h | 30h | 34h |
MUTE | ra6 | 72h | 61h | 36h |
| r53 | 72h | 35h | 33h |
| r2b | 72h | 32h | 62h |
| r4f | 72h | 34h | 66h |
| r59 | 72h | 35h | 39h |
MENU | r54 | 72h | 35h | 34h |
ENTER | r10 | 72h | 31h | 30h |
AUTO POSITION | r09 | 72h | 30h | 39h |
STILL | ra4 | 72h | 61h | 34h |
ASPECT | re2 | 72h | 65h | 32h |
WALL SCREEN | rd7 | 72h | 64h | 37h |
CE | re7 | 72h | 65h | 37h |
[Example] When displaying the MENU selection bar. (Figures and symbols enclosed in quotation marks are ASCII codes.):
Sending commands | Status code | Description |
from the PC, etc. | from the projector |
|
30 30 72 35 34 0D |
| Command operating the same as the |
‘0’ ‘0’ ‘r’ ‘5’ ‘4’ ‘ ’ |
| MENU button |
| 30 30 72 35 34 0D | Command receipt confirmation |
| ‘0’ ‘0’ ‘r’ ‘5’ ‘4’ ‘ ’ | (Command echo back) |
3