Mitsubishi Electronics MC100 manual Power Connector, Power Switch, Parallel Port Connector

5 EXTERNAL COMPONENTS

REAR Panel Components

PCI	ETHERNET	ISA/PICMG	ISA
SLOTS	CONNECTOR	SLOT	SLOTS

POWER	POWER	SERIAL	PARALLEL	USB	VIDEO	KEYBOARD	MOUSE
CONNECTOR	SWITCH	PORTS	PORT	PORTS	CONNECTOR	PORT	PORT

Located on the rear of the computer are the following components:

Power Connector

Connects to power cord.

Power Switch

Switches computer power to 115 or 230 VAC.

COM1, COM2

These serial port connectors are 9-pin male D-Sub type sockets. COM1 is a dedicated RS-232 port. COM2 is a RS-232/RS-422/RS-485 port. The manufacturer’s default for COM2 is RS-232. To select RS-422 or RS-485, refer to manual MAN-ACZ85-001 for jumper settings.

Parallel Port Connector

Parallel Port (LPT1) is a 25-pin male D-Sub connector that is used to connect to a printer.

Two USB (Universal Serial Bus) Connectors

There are two USB connectors located on the rear of the unit. Many devices now use this type of connector (i.e., scanner, printer, mouse, etc.). One or both may be used.

14 MC100 Series Rack Mount Computer MAN-RCKPC-001