Mitsubishi Electronics MIM-G01, MIM-A01 manual Sending Internet E-Mail Smtp, AT+T Send=Email

Page 51

Appendix

AT Commands MIM-A01

 

 

Sending Internet E-Mail (SMTP)

AT+T Send="Email;..."

AT+T Send="Email; To: Recipient; Dial: Number;From: Sender; Flags:flag PPPUser: User; PPPPassword: Password; SMTPMailServer: SMTPServer"

>Subject

>MessageText line#1 >MessageText line#n ><CTRL>+<Z>

This command sends an Internet e-mail or sets the parameters.

After closing the command line using <CR/LF>, your Tixi modem displays a prompt (>) where you can specify the subject line.

The actual message text is entered in the subsequent lines. To close this message, press <CTRL>+<Z>.

If you skip the message text, the parameters are saved for later use until replaced by new parameters.

Number:

Dialup number of the Internet service provider.

 

Enter characters which can be dialled (0-9,*,#, comma) only.

Sender:

Internal e-mail address of the message sender, for example,

 

paul@example.com.

 

This address is used for the From: field of the outgoing message.

Recipient:

Internet e-mail address of the message recipient, recipient

 

otto@example.net. This address is used for the To: field of the

 

outgoing message.

flag:

Enter “PbS“ here if POP-before-SMTP is to be used.

 

(otherwise you can omit the parameter.)

User:

PPP user name to dial into the Internet service provider.

Password:

PPP password.

SMTPServer:

Name or address of the SMTP server that is to send the message,

 

for example, mail.provider.com.

Subject:

Subject line of the e-mail.

 

This is always generated from the first line that is entered after the

 

prompt.

MessageText line#1...n:

Other lines of the e-mail text.

 

Each line is entered at the prompt character displayed by the mo-

 

dem and closed by <ENTER>. The message text must not con-

 

tain umlauts.

Example:

 

An Internet e-mail is sent:

 

AT+T Send="EMail; Dial: 0191011; From: user@example.com;

To: info@example.net;

PPPUser: 00012345678445566; PPPPassword: Rose;

SMTPMailServer: smtp.t-online.de"

>Hello Paul,

>This is the important message sent by e-mail. ><CTRL>+<Z>

Short modem reply:

OK

Mitsubishi Industrial Modem

8 - 17

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Draft Page About this Manual Page Industrial Modems MIM-A01 and MIM-G0 Art-NoVersion Changes / Additions / Corrections Mitsubishi Electric Proper use Security AdviceSafety instructions Intended Target AudienceMitsubishi Electric Equipment Versions Mounting and InstallationPower supply Operation Mitsubishi Industrial Modems at a glanceConfiguration Technical DataAppendix Mitsubishi Industrial Modems at a glance Mitsubishi Normal Modem GSM MIM-G01Mitsubishi Super Modem 56k MIM-A01 Tab -1Mitsubishi Industrial Modems at a glance Teleservice via PCEquipment Versions Modem TypTab -2Description of the connectors of the modems Mounting and InstallationInterfaces and Connectors Overview of all connectors of the Normal Modem GSMTab -3Two LEDs are used to show the state of the modem Meaning of the LEDsConnecting the GSM antenna Inserting the SIM cardPush down the button until the card holder is released 027954 Overview of all connectors of the Super Modems 56k Tab -4Description of the connectors of the ModemsSuper Modem 56k MIM-A01 Line Tab -5Five LEDs are used to show the state of the modemMitsubishi Super Modem 56k supports the a/b leads 3 Testing the Telephone ConnectionConnection to the Telephone Network Telephone Exchange SystemMounting Power supply LEDs on MIM-A01 OperationMIM-G01 MIM-A01Options GSM and serial communication ConfigurationProject Settings MIM and Mitsubishi Alpha XLFunction Block SMS send GSM SMS Short Message ServiceSMS Setting SMS Service CenterRecipient Initialisation of a GSM Modem PLC ConnectionMIM-G01 and FX Messenger MIM for FX Remote AccessMIM and Mitsubishi Melsec FX Connection to other Mitsubishi ProductsRS 232-Transparent-Mode TransMode Time delays during modem transmissionsExample TransMode CommandTransMode Login Command AT+T SEND=TransModeLogin with password and parameters Login without parametersSystem Architecture Technical DataMain Features TabTab -5General Data FirmwareTab -4 Firmware General DataMIM-G01 DimensionsSuper Modem 56k MIM-A01Appendix AT Commands MIM-G01Important AT Commands +CSQ Signal QualityAlphax NumberxTypex DCEbyDTE DTEbyDCE +ICF Data FormatFormat Parity +IFC Flow Control+CMGS Send SMS Mode Format+COPS GSM Network StatV24-V35 Commands Overview of AT-CommandsService Commands Tab -10 Service CommandsTab -15 Security Tab -14 NetworkSMS Commands Data CommandsPhonebook Fax Commands CLASS1 Fax Commands CLASS2Special AT Commands AT Commands MIM-A01 Overview of AT CommandsTab -22Overview of AT Commands Select Serial Port Flow Control AT Command Descriptions+TFORMAT Sets the data format +TBAUD Set the baudrateResult Code Display Control Dial CommandCommand Mode Echo Switch Hook ControlTab -24Overview of S-Registers +VCID Caller ID SettingsOverview of S-Registers Store Active ProfileOverview of the Commands Message CommandsAT+T Send=Fax Setting General Message ParametersAT+T Send=All Sending a FaxAT+T Send=SMS Sending an SMS MessageSubject Sending an Express E-MailAT+T Send=Express SenderAT+T Send=Email Sending Internet E-Mail SmtpSize of messages received Retrieving Internet E-Mail POP3AT+T Send=POP3 Size of detected messagesAT+T Delete=Number AT+TList Displaying Received MessagesAT+T List = type AT+T Delete Deleting a Stored MessageParameterList AT+T Read Reading a Stored MessageAT+T Read=Number +T Read Number, type, time ParameterList MessageAT+T Time=time Modem CommandsAT+T Answer=OnOff AT+T Answer?AT+T Verbose=OnOff AT+T Time?AT+T Echo=OnOff AT+T Echo?AT+T Redial AT+T Mode=ModeAT+T Help AT+T EraseAT+T DialRules? AT+T RedialDelayAT+T RedialDelay? AT+T DialRules=DialMethod,DialToneAT+ T Speaker Adjusting the Modem Speaker Volume AT+T Speaker=VolumeAT+T Speaker? MIM G01 MIM-A01 IndexPage Headquarters

MIM-G01, MIM-A01 specifications

Mitsubishi Electronics has long been a frontrunner in the realm of advanced technology, particularly in the development and optimization of automation solutions. Two of their standout offerings in the field of air conditioning technology are the MIM-A01 and MIM-G01 systems, which cater to both residential and commercial applications.

The MIM-A01 is an indoor unit featuring a sleek design that blends seamlessly with modern interior aesthetics. This unit is engineered for energy efficiency, boasting an impressive seasonal energy efficiency ratio (SEER) that significantly reduces electricity consumption. One of its key features is the V-Flow design technology, which allows for enhanced airflow distribution, ensuring that every corner of the room receives adequate cooling or heating. The MIM-A01 also comes with advanced filtration systems, including a high-performance filter that captures dust and allergens, promoting a healthier indoor environment.

On the other hand, the MIM-G01 represents Mitsubishi's commitment to high-quality outdoor units. This model is known for its compact size and robust design, making it suitable for a variety of installation spaces. With its advanced inverter technology, the MIM-G01 can adjust its cooling or heating output according to the changing conditions, thereby optimizing energy usage. One of its hallmark technologies is the Hyper Heating feature, which allows the unit to maintain its performance even at extremely low outdoor temperatures, making it ideal for colder climates.

Both units share a common thread of smart technology integration. They are equipped with wireless control capabilities, allowing users to adjust settings remotely via smartphone apps or smart home systems. This feature not only enhances user convenience but also facilitates better energy management by allowing users to monitor and control energy use from anywhere.

In summary, the Mitsubishi Electronics MIM-A01 and MIM-G01 systems epitomize modern air conditioning technology with their focus on energy efficiency, innovative airflow design, and advanced smart features. Whether for a small residential space or a larger commercial application, these units align with the evolving demands of energy-conscious consumers while delivering optimal performance and comfort. Their commitment to quality and advanced technology solidifies Mitsubishi's position as a leader in the HVAC industry.
Top Page Image Contents