●Connect 232ADP and a personal computer,and exchange data with the PC.
Personal computer
FX0N series sequencer
Send
| Receive | |
• Send data | • Receive data | |
• Send data | ||
• Receive data | ||
|
●Use the communication cable suited to the connector pin configuration of the personal computer.
(For representative wiring see section 4.)
Preparation of software
●Use ordinary communication software (terminal emulator) or dedicated program in the personal computer.
The communication format of the PC for this example is as follows.
Data length | 8 bit |
Parity | Even |
Stop bit | 1 bit |
Baud rate | 2400 |
If the communication format of the software cannot be adjusted to this setting, adjust the PC and the software to be the same.