Mitsubishi Electronics CP9800DW operation manual Contents

Page 3

CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense.

Operation is subject to the following two conditions;

(1)this device may not cause interference, and

(2)this device must accept any interference, including interference that may cause undesired operation of the device.

WARNING:

In the USA or Canada, use the AC power cord according to the recommendations as below, in order to comply with UL60950-1 and CAN/CSA C22.2 No. 60950-1-03. Connect to the 120V receptacle of the room or the host equipment.

The AC power cord should be UL or CSA approved and consist of type SVT, size 16 or 18AWG, length 2 m or shorter cord with IEC60320-1/C13 type, 125V 10A or higher rating connector and NEMA 5-15 type, 125V 10A or higher rating plug.

Use the AC power cord as specified above, so as not to interfere with radio and television reception.

If you use other cables, it may cause interference with radio and television reception.

WARNING:

In Europe, use the AC power cord according to the recommendations as below, in order to comply with EN60950-1.

Connect to the 230V receptacle of the room or the host equipment.

The AC power cord should be VDE approved and consist of core size 1mm2 or bigger, length 2 m or shorter cord with IEC60320-1/C13 type, 250V 10A or higher rating connector and CEE(7)VII type, 250V 10A or higher rating plug.

Use the AC power cord as specified above, so as not to interfere with radio and television reception.

If you use other cables, it may cause interference with radio and television reception.

WARNING:

The socket outlet shall be installed near the equipment and shall be easily accessible.

Note: This symbol mark is for EU countries only.

This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and compo- nents which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

Please, dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic product. Please, help us to conserve the environment we live in!

PRECAUTIONS

FEATURES

 

CONNECTIONS

PREPARATION

SHOOTING

TROUBLE-

 

OTHERS

 

 

CONTENTS

Page 2 Page 4
Image 3
Page 2 Page 4
Contents CP9800DW Information ContentsContents Contents Protective Measures Safety PrecautionsSafety Precautions Installation LocationsFor Long Operating Life Other Cautions Special Features Special FeaturesUnpacking UnpackingUnwrap the packing Front Panel Features and FunctionsSide and Rear Panel Features and FunctionsConnection with USB Data Signal Equipment Connecting to Personal Computer ExampleConnections Setting of DIP Switches Setting DIP SwitchesConnections Before Operation Installation of Print PaperBefore Operation Install the print paper into the unitHOW to Shift the Adjustable Paper Guides Positioning of Adjustable Paper GuideLoad the ink ribbon in the ink cassette as shown below Installation of INK RibbonInstalling the INK Ribbon Installing the INK CassetteWhen the manual & cut mode has been selected 2Push the ink cassette toward the back of the unitPush the center of the door to close Storage of Paper / INK Ribbon SET Handling of Paper / INK Ribbon SETBefore Printing After PrintingInstallation of Printer Driver Indications on the Front Panel and Countermeasures Error Messages and CountermeasuresOvercoming Paper Jams Error Messages and CountermeasuresBefore Calling for Service Instructions for TransportationUse the original packaging Thermal Head Cleaning CleaningPreparations for Cleaning Filter CleaningCleaning Roller CleaningPaper Flange Cleaning Specifications SpecificationsContents of CD-ROM Mitsubishi Electric Europe B.V UK Branch

CP9800DW specifications

The Mitsubishi Electronics CP9800DW is a high-performance printer that is notable for its advanced features and technologies designed to meet the demanding needs of professional print environments. This color digital printer is particularly revered in settings such as photography studios and graphic design shops, where print quality and reliability are paramount.

One of the standout features of the CP9800DW is its ability to produce stunningly vivid images with a maximum resolution of 1200 x 1200 dpi. This level of precision ensures that every print showcases rich colors and sharp details, making it an excellent choice for printing high-quality photographs as well as promotional materials. The printer utilizes a sophisticated four-color dye sublimation technique that enhances color vibrancy and depth, allowing for lifelike reproductions.

Moreover, the CP9800DW supports a wide range of media types and sizes, from standard 4”x6” prints to larger formats. This versatility makes it an appealing option for businesses and professionals who require flexibility in their print jobs. The printer is compatible with various paper types, including matte, glossy, and fine art papers, enabling users to achieve the desired finish for their projects.

In terms of speed, the CP9800DW does not disappoint. It is capable of producing high-quality prints quickly, significantly reducing wait times during busy print runs. The printer's efficient design ensures that it can handle large volumes without sacrificing quality.

Another critical characteristic of the CP9800DW is its user-friendly interface. The device comes equipped with an intuitive control panel that simplifies operation, making it accessible even for those who are not technically inclined. Additionally, the printer supports various connectivity options, such as USB and network connections, facilitating easy integration into existing workflows.

The CP9800DW also emphasizes reliability, featuring robust construction and high-quality components designed to withstand the rigors of continuous use. This durability is paired with low maintenance requirements, allowing users to focus on their creative endeavors rather than equipment upkeep.

In summary, the Mitsubishi Electronics CP9800DW combines advanced printing technologies, exceptional image quality, versatility in media handling, and user-friendly operation. Its features make it an ideal choice for professionals who demand nothing but the best in their printing needs, ensuring that every project boasts remarkable quality and efficiency.
Top Page Image Contents