Preparing your projector
What’s included in the box
AC power cord | for US | 1 | Remote control |
| for EU | 1 | User Manual/Quick Start up (English only) |
| for UK | 1 | Safety Manual/Quick Start up |
1 RGB cable for PC | 1 | ||
|
| 2 | Battery |
|
| 1 | Lens cap |
|
| 1 | Lamp replacement attachment |
Important:
•The attached power cords are to be used exclusively for this product. Never use them for other products.
Inserting the batteries into the remote control
1 | 1. | Remove the back lid of the remote control. |
. | Check the polarity (+), | |
| 3 | correctly, inserting their |
|
| • If the battery is inserted from the (+) side first, inserting |
|
| the |
|
| on the battery side. If the battery is forced in this way, |
| 2 | the outer label of the battery may get ripped and it may |
| cause a | |
|
| |
| . Attach the back lid. | |
| Important: | |
|
| • Use two |
|
| • Replace the two batteries with new ones when the |
|
| remote control is slow to respond. |
Removing the batteries from the remote control
Remove the back lid of the remote control and take out the batteries.
Caution:
•Use of a battery of wrong type may cause explosion.
•Only
•Dispose of used batteries according to your local regulations.
•Batteries may explode if misused. Do not recharge, disassemble, or throw them in fire.
•Be sure to handle the batteries according to the instructions.
•Load the batteries with its positive (+) and negative
•Keep batteries out of reach of children and pets.
•Remove the batteries, if the remote control is not used for a long time.
•Do not combine a new battery with an old one.
•If the solution of batteries comes in contact with your skin or clothes, rinse with water. If the solution comes in contact with your eyes, rinse them with water and then consult your doctor.
EN-