Before Operation

INSTALLATION OF PRINT PAPER

The paper tray adjusts to the size of the paper you are installing. Do not force paper that is too long or too wide into the tray.

NOTE

•Use only the tray designed for this printer.

•A spacer for protection during transport is attached inside the paper tray when the

PRECAUTIONS

1printer is shipped from the factory. Remove this spacer when using the printer.

Plate lever

FEATURES

Pull down the plate lever of the paper tray until you hear a click.

2If necessary, adjust the paper tray to fit the paper you are installing.

Move the paper width adjuster and paper length adjuster according to the paper size you are installing. Move them as shown below.

	paper size	Paper width adjuster	Paper length adjuster
	A4	Raise	Raise

3Letter long		Lay down	Lay down

Paper width Paper length adjuster adjuster

CONNECTIONS

PREPARA

TION

SHOOTINGTROUBLE

Take the print paper out of the packaging together with the cardboard for protecting the printing surface.

NOTE

•The paper may be stuck together. Loosen the pages well before unpacking.

• The cardboard is placed on the top of the print paper to protect the printing surface. Take the cardboard together with print paper so that you do not touch the printing

4surface.

Loosen the paper before unpacking.

Tab

Place the paper in the tray with the cardboard on the top.

Make sure that the front corners of the stack are under the metal tabs.

OTHERS