Mitsumi electronic HC3800 user manual Plugging in the power cord

Page 17

Viewing video images (continued)

B. Plugging in the power cord

•In order to ensure the safety in case of trouble with the projector, use an electrical outlet having an earth leakage breaker to supply the power to the projector. If you do not have such outlet, ask your dealer to install it.

1.Plug the attached power cord into the power cord inlet of this projector.

. Plug the other end of the power cord into a power outlet.

Earthing terminal

2

1

Power cord (example)

•The power cords for use in the U.S. and Europe are included with this projector. Use the appropriate one for your country.

•This projector uses the power plug of three-pin grounding type. Do not take away the grounding pin from the power plug. If the power plug doesn’t fit your wall outlet, ask an electrician to change the wall outlet.

•The provided power cord for the U.S. is rated at 120 V. Never connect this cord to any outlet or power supply using other voltages or frequencies than rated. If you use a power supply using other voltage than rated, prepare an appropriate power cord separately.

•Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.

•Do not place any objects on the power cord or do not place the projector near heat sources to prevent damage to the power cord. If the power cord should be damaged, contact your dealer for replacement because it may cause fire or electric shock.

•Do not modify or alter the power cord. If the power cord is modified or altered, it may cause fire or electric shock.

Caution:

•Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord.

•Do not plug in or out the power cord with your hand wet. It may cause electric shock.

EN-17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents HC3800 Risk of Electric Shock Do not Open When using the projector in EuropeContents Important safeguards Important safeguards Removing the batteries from the remote control Inserting the batteries into the remote controlPreparing your projector What’s included in the boxOverview Preparing your projectorControl panel Terminal panelBottom side Remote controlUsing the picture quality adjusting buttons Reception angle Using the remote controlOperational range of the remote control Setting up the screen Setting up your projectorWhen the aspect ratio of the screen is Screen size and projection distanceWhen the aspect ratio of the image is Setting up your projectorWhen the aspect ratio of the screen is 2.351 CinemaScope When projected images are distorted to a trapezoid When fine streaks are seen on projected imagesWith the Installation menu See page 26 for menu setting To cancel the menuFront projection, ceiling mounting InstallationRear projection Trigger terminalViewing video images Connecting the projector to video equipmentBasic home theater system connection PreparationConnecting to a DVD player or Hdtv decoder Connecting to a video player, etcWhen a TV tuner or VCR is connected Viewing video imagesConnection for video equipment having an Hdmi terminal Connecting to video equipment having a Hdmi terminalPlugging in the power cord Projecting images To stop projecting ZOOM1 ZOOM2 Stretch ANAMORPHIC1 ANAMORPHIC2 Setting the aspect ratioWith the Feature menu See page 26 for menu setting How to change the settingsWith the remote control Plugging the power cord Connecting the projector to a computerViewing computer images About DDCComputer Viewing computer imagesSetting of the resolution When connecting to a notebook computerExample of the setting procedure for external output Auto Position buttonMenu operation Feature Signal Keystone Lamp ModeAvailable settings in the menus How to set the menusSetting Function Menu operationInstallation menu Feature menu User menu Signal menuTo enable the stored image quality settings To store the settingsAV memory Information menuTo adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint How to Use BrilliantColorTMTo adjust the tone of white Color Temp Adjusting projected imagesAbout color temperature To enable the stored color temperatureTo adjust the ratio of change in brightness Gamma Mode How to Use Color ManagementBlue Magenta RED HighLPF Progressive filter To enable the stored gamma modeTo adjust the vertical position Password function Advanced featuresTo enable the password function To cancel the password functionReplacing the lamp Interval of lamp replacementTo replace the lamp When the projector is mounted to the ceilingReplacing the lamp Reset of the lamp operation time Cleaning of the lens MaintenanceCleaning of the projector and the ventilation slots No image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution TroubleshootingOthers Problem Solution EN-43 Status Condition Possible Solution IndicatorsNormal condition Abnormal conditionDimension drawings unit mm SpecificationsSpecifications Replacement part option/not included in the box ConnectorsComputer IN/COMPONENT Video VLT-HC3800LPMitsubishi Electric Corporation

HC3800, HC3800 specifications

The Mitsumi Electronic HC3800 is a versatile and innovative device that plays a crucial role in enhancing connectivity and signal transmission in various electronic applications. Designed to meet the demands of modern technology, the HC3800 stands out due to its robust features, cutting-edge technology, and reliable performance.

One of the main features of the HC3800 is its high-speed data transmission capabilities. It supports advanced protocols that allow for quick and efficient communication between devices. This is particularly important in applications such as telecommunications, automotive systems, and industrial automation where speed and reliability are paramount. The HC3800 ensures minimal latency, enabling real-time data processing and response.

Another highlight of the HC3800 is its compact and efficient design. With a small footprint, it can easily be integrated into a wide range of devices, from handheld gadgets to larger industrial equipment. This versatility makes it a preferred choice for manufacturers looking to optimize space without compromising on performance.

The HC3800 employs advanced modulation techniques, which enhance signal integrity and reduce interference. This is critical in environments where electromagnetic interference (EMI) can disrupt communications. By utilizing robust error detection and correction algorithms, the HC3800 maintains high levels of data integrity, ensuring that information is transmitted accurately even in challenging conditions.

Moreover, the Mitsumi HC3800 boasts an impressive power efficiency profile. It is engineered to operate effectively at lower power levels, making it suitable for battery-operated devices. This not only extends the longevity of devices using the HC3800 but also complies with green technology initiatives aimed at reducing energy consumption.

The technology within the HC3800 is continually evolving, ensuring compatibility with future advancements. Mitsumi's commitment to research and development means that users can expect regular updates and improvements in performance features. Additionally, the HC3800 provides extensive support for a wide array of interfaces, making it adaptable to various system architectures.

In conclusion, the Mitsumi Electronic HC3800 is a state-of-the-art component that combines high-speed data transmission, compact design, superior signal integrity, and energy efficiency. Its features make it an ideal choice for a multitude of applications across different industries, ensuring that users benefit from enhanced connectivity and reliable performance in their electronic systems. Whether it's for personal or industrial use, the HC3800 continues to meet and exceed market demands while shaping the future of electronic connectivity.
Top Page Image Contents