Mitsubishi Electronics HC3000 user manual EN-29, To adjust the vertical position

Page 29

This projector automatically and properly projects video signals supplied from the computer. However, some video signals may not be projected, depending on the type of the computer. In such a case, press the AUTO POSITION button. (See page 22.) When the signal is still not projected properly, adjust the projected image using the SIGNAL menu.

How to adjust the image supplied from the computer using the menu:

Carry out the following procedures according to the symptoms.

Wide strips appear. ……………………………………… Adjust TRACKING in the SIGNAL menu.

The projected image flickers.

The projected image is blurred. ………………………… Adjust FINE SYNC. in the SIGNAL menu.

The projected image is displaced horizontally. ……… Adjust HORIZ.POSITION in the SIGNAL menu. Every time the

button is pressed, the image moves to the right. Every time the button is pressed, the image moves to the left.

The projected image is displaced vertically. ………… Adjust VERT.POSITION in the SIGNAL menu. Every time the

 

button is pressed, the image moves down. Every time the

 

button is pressed, the image moves up.

The top part of the image flags. ………………………

Change the setting of HOLD in the SIGNAL menu. Select ON

 

,

 

 

press the ENTER button, and adjust BEGIN or END to minimize

 

the flagging.

Wide strips appear. ………………………………………

Adjust CLAMP POSITION or CLAMP WIDTH in the SIGNAL -

 

USER menu.

The motion doesn't run smoothly.………………………

Adjust VERT. SYNC. in the SIGNAL - USER menu. Select

 

AUTO for normal use.

Noise appears on the right or left half of the image. … Adjust SHUTTER (LS) or SHUTTER (RS) in the SIGNAL - USER

menu.

Noise appears on the top or bottom part of the image. Adjust SHUTTER (U) or SHUTTER (L) in the SIGNAL - USER

 

menu.

1.

Display the SIGNALmenu.

2.

Press the or button to select an item to adjust.

3.

Adjust the selected item by pressing the or button.

To cancel the menu:

4. Press the MENU button.

• Do not change the settings of the SIGNAL menu in normal use.

Simple method to adjust the image position

To adjust the horizontal position:

1.Align the left edge of the image with the left side of the screen by adjusting HORIZ.POSITION. Then, align the right edge of the image with the right side of the screen by adjusting TRACKING.

2.Repeat step 1 above to complete the adjustment of the horizontal position.

To adjust the vertical position:

3. Align the upper edge of the image with the upper side of the screen by adjusting VERT.POSITION.

LPF

You can select whether or not to enable the LPF. This item is set to OFF normally.

Vertical or horizontal streak noise may appear on the projected image, depending on the type of the DVD player you use. In such a case, you can reduce such streak noise by enabling the LPF. However, projected images become softened slightly.

1.

Display the SIGNAL menu.

 

 

 

 

 

 

 

 

 

 

LPF

OFF

 

 

 

 

 

 

 

 

 

 

 

2.

Press the

or

button to select USER.

 

 

 

 

3.

Press the ENTER button.

 

 

 

 

4.

Press the

or

button to select LPF.

 

 

 

 

5.

Press the

or

button to choose ON or OFF.

 

 

 

 

To cancel the menu:

6. Press the MENU button.

ENGLISH

EN-29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents HC3000 EN-2 When using the projector in EuropeContents EN-4 Important safeguardsEN-5 Inserting the batteries into the remote control Checking accessoriesPreparing your projector CablesEN-7 OverviewControl area Terminal panel Using the picture quality adjusting buttons Remote controlPreparing your projector Continue Bottom sideOperational range of the remote control Using the remote controlReception angle EN-9Setting up the screen Setting up your projectorBasic setup Adjusting the projection angleTo cancel the menu With the Installation menu See page 24 for menu settingTrigger terminal EN-11When the aspect ratio of the screen is Setting up your projectorScreen size and projection distance EN-12Viewing video images Connecting the projector to video equipmentBasic home theater system connection EN-13Connecting to a DVD player or Hdtv decoder Connecting to a video player, etcWhen a TV tuner or VCR is connected Viewing video imagesConnection for video equipment having a DVI-D terminal EN-15Connection for video equipment having a Hdmi terminal EN-16 Plugging in the power cordEN-17 Projecting imagesTo stop projecting When projected images are distorted to a trapezoidEN-18 Following casesHow to change the settings Setting the aspect ratioIris button EN-19Plugging the power cord Connecting the projector to a computerViewing computer images EN-20EN-21 Projecting imagesExample of the setting procedure for external output When connecting to a notebook computerViewing computer images Auto Position buttonEN-23 Menu operationAvailable settings in the menus How to set the menusMenu operation EN-24EN-25 Installation menuFeature menu EN-26 AV memoryTo adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To sharpen or soften the projected image SharpnessTo adjust the tone of white Color Temp Adjusting projected imagesAbout color temperature To adjust the ratio of change in brightness Gamma ModeEN-29 To adjust the vertical positionPassword function Advanced featuresTo enable the password function To cancel the password functionInstallation Using filterCleaning Cleaning the filterEN-32 Interval of lamp replacementReplacing the lamp Cleaning of the lens Cleaning of the projector and the ventilation slotsReset of the lamp operation time To replace the lampNo image appears on the screen Problem TroubleshootingSolution EN-34Problem Solution No image appears on the screen Problem SolutionEN-35 Images are not displayed correctlyEN-36 TroubleshootingOthers Problem Solution Normal condition IndicatorsAbnormal condition EN-37EN-38 Dimension Drawings unit mmSpecifications EN-39 ConnectorsReplacement part Option / Not included in the box Mitsubishi Projector Contact Information
Related manuals
Manual 40 pages 11.21 Kb

HC3000 specifications

The Mitsubishi Electronics HC3000 is a cutting-edge projector designed to deliver high-quality visuals for both home theater enthusiasts and professional presentations. Known for its exceptional image clarity and versatility, the HC3000 stands out in the crowded market of digital projection.

One of the key features of the HC3000 is its superior resolution capability. With support for Full HD (1920 x 1080), it ensures that images are sharp and vibrant, making it ideal for cinematic experiences and detailed presentations. The high brightness level, which reaches up to 3000 ANSI lumens, allows for clear visibility in various lighting conditions, whether in a dimly lit home theater or a well-lit conference room.

The HC3000 employs advanced DLP (Digital Light Processing) technology, which enhances color accuracy and reduces the possibilities of rainbow effects that can occur in some projection technologies. This DLP technology is complemented by Mitsubishi's proprietary color wheel, which enhances color reproduction, providing deep blacks and rich colors that make images pop.

Another standout characteristic is its flexible connectivity options. The HC3000 includes multiple input terminals, including HDMI, VGA, and composite inputs, making it compatible with a range of devices such as Blu-ray players, gaming consoles, and laptops. This multitude of options ensures that users can easily integrate the projector into their existing systems and switch between different sources without hassle.

Portability is another strength of the HC3000. Weighing in at a manageable size, it can be transported easily, making it a great option for business professionals who need to present on the go. Its compact design does not sacrifice performance for size, maintaining high-quality output even in a portable format.

Additionally, the HC3000 incorporates a robust cooling system designed to extend the life of the projector's lamp. This feature not only enhances durability but also minimizes operational noise, allowing for an immersive viewing experience without distracting sounds.

In summary, the Mitsubishi Electronics HC3000 is a versatile and high-performing projector, offering Full HD resolution, advanced DLP technology, excellent connectivity options, and portability. Whether for home entertainment or professional use, it delivers outstanding image quality, making it a popular choice among consumers seeking reliability and performance.
Top Page Image Contents