Mitsubishi Electronics HC1600 user manual Menu operation

EN-23

* 1: Not available with certain signals.

* 2: Available only when the input signal is TV50, TV60, 480i, or 576i.

* 3: Available only when the input signal is from the VIDEO IN or

S-VIDEO IN terminal. * 4: Setting range differs depending on the input signals.

* 5: Not available when the input signal is from the VIDEO IN or S-VIDEO IN terminal.

* 6: Not available when the input signal is from the HDMI IN terminal.

* 7: Available only when the input signal is 480i, 480p, 576i, or 576p.

* 8: Available only when the input signal is from the COMPUTER IN/COMPONENT VIDEO IN terminal.

VERT.SYNC *1 LPF *6,*7 SHUTTER (U) *1 SHUTTER (L) *1 SHUTTER (LS) *1 SHUTTER (RS) *1

AUTO, OFF

ON, OFF

0 - 32

0 - 32

0 - 95

0 - 95

Menu operation

• Menus are not displayed when no signal is supplied to the projector.

ENGLISH

IMAGE

INSTALLATION

FEATURE

SIGNAL

GAMMA MODE		AUTO, SPORTS, VIDEO, CINEMA
		USER1	REFERENCE		SPORTS, VIDEO, CINEMA
		USER2		HIGH	±5
CONTRAST		±30		MID	±5
BRIGHTNESS		±30		LOW	±5
COLOR TEMP.		HIGH BRIGHTNESS
		COOL
			CONTRAST R			±30
		MEDIUM
			CONTRAST G			±30
		WARM
			CONTRAST B			±30
		USER
			BRIGHTNESS R			±30
COLOR	*1	±10
			BRIGHTNESS G			±30
TINT *1,*6		±10
			BRIGHTNESS B			±30
SHARPNESS	*1	±5
BrilliantColorTM		0 - 10
VERTICAL LOCATION		±26
LAMP MODE		STANDARD, LOW
LAMP TIME (LOW)		****H
AUTO POWER ON		ON , OFF
AUTO POWER OFF		OFF, 5, 10, 15, 30, 60min
SPLASH SCREEN		ON , OFF
BACK COLOR		BLUE, BLACK
IMAGE REVERSE		OFF, MIRROR, INVERT, MIRROR INVERT
TRIGGER OUT		ON , OFF
TEST PATTERN		CROSS HATCH

ASPECT		AUTO, 4:3, 16:9, ZOOM1, ZOOM2, STRETCH, REAL			*4
PASSWORD FUNCTION		DISPLAY INPUT	,MENU ACCESS	LOCK	OK
MENU POSITION		1 (Upper left), 2(Lower right)		UNLOCK	OK
CINEMA MODE *2		AUTO , OFF
VIDEO SIGNAL	*3	AUTO , NTSC , PAL , SECAM, 4.43NTSC, PAL-M, PAL-N, PAL-60
SET UP	*1	AUTO, OFF, 3.75%, 7.5%
SCART INPUT	*8	ON, OFF

LANGUAGE	, English, Español, Deutsch, Français, Italiano,					,	,	,
RESET ALL	OK
HORIZ.POSITION *6	0 - 999	*4
VERT.POSITION *6	0 - 999	*4
FINE SYNC. *5,*6	0 - 31
TRACKING *1*,5,*6	0 - 9999	*4
COMPUTER INPUT *5	AUTO, RGB, YCBCR / YPBPR
OVER SCAN	100 - 90%	*4
HOLD *1*,5,*6	OFF			BEGIN		0 - 99
	ON			END		0 - 99
USER	OK		CLAMP POSITION *6		1 - 255		*4
			CLAMP WIDTH *6			1 - 63	*4