Mitsubishi Electronics HC1600 user manual To adjust the vertical position, Lpf

Page 29

Adjusting projected images (continued)

This projector automatically and properly projects video signals supplied from the computer. However, some video signals may not be projected, depending on the type of the computer. In such a case, press the AUTO POSITION button. (See page 22.) When the signal is still not projected properly, adjust the projected image using the SIGNAL menu.

How to adjust the image supplied from the computer using the menu:

Carry out the following procedures according to the symptoms.

Wide strips appear. ……………………………………… Adjust TRACKING in the SIGNAL menu.

The projected image flickers.

The projected image is blurred. ………………………… Adjust FINE SYNC. in the SIGNAL menu.

The projected image is displaced horizontally. ……… Adjust HORIZ.POSITION in the SIGNAL menu. Every time the

button is pressed, the image moves to the right. Every time the button is pressed, the image moves to the left.

The projected image is displaced vertically. ………… Adjust VERT.POSITION in the SIGNAL menu. Every time the

 

button is pressed, the image moves down. Every time the

 

button is pressed, the image moves up.

The top part of the image flags.…………………………

Change the setting of HOLD in the SIGNAL menu. Select ON

 

,

 

 

press the ENTER button, and adjust BEGIN or END to minimize

 

the flagging.

A solid black or solid white appears in the image. …

Adjust CLAMP POSITION or CLAMP WIDTH in the SIGNAL -

 

USER menu.

The motion doesn’t run smoothly.………………………

Adjust VERT. SYNC. in the SIGNAL - USER menu. Select

 

AUTO for normal use.

Noise appears on the right or left half of the image. … Adjust SHUTTER (LS) or SHUTTER (RS) in the SIGNAL - USER

menu.

Noise appears on the top or bottom part of the image. Adjust SHUTTER (U) or SHUTTER (L) in the SIGNAL - USER

 

menu.

1.

Display the SIGNALmenu.

2.

Press the or button to select an item to adjust.

3.

Adjust the selected item by pressing the or button.

To cancel the menu:

4. Press the MENU button.

• Do not change the settings of the SIGNAL menu in normal use.

Simple method to adjust the image position

To adjust the horizontal position:

1.Align the left edge of the image with the left side of the screen by adjusting HORIZ.POSITION. Then, align the right edge of the image with the right side of the screen by adjusting TRACKING.

2.Repeat step 1 above to complete the adjustment of the horizontal position.

To adjust the vertical position:

3. Align the upper edge of the image with the upper side of the screen by adjusting VERT.POSITION.

LPF

You can select whether or not to enable the LPF. This item is set to OFF normally.

Vertical or horizontal streak noise may appear on the projected image, depending on the type of the DVD player you use. In such a case, you can reduce such streak noise by enabling the LPF. However, projected images become softened slightly.

1.

Display the SIGNAL menu.

 

 

 

 

 

 

 

 

LPF

OFF

 

 

 

 

 

2.

Press the

or

button to select USER.

 

 

 

 

 

3.

Press the ENTER button.

 

 

 

 

4.

Press the

or

button to select LPF.

 

 

 

 

5.

Press the

or

button to choose ON or OFF.

 

 

 

 

To cancel the menu:

6. Press the MENU button.

ENGLISH

EN-29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents HC1600 Risk of Electric Shock Do not Open Contents Important safeguards Important safeguards Preparing your projector Checking accessoriesInserting the batteries into the remote control Control area Terminal panel Preparing your projectorOverview Using the picture quality adjusting buttons Remote controlAdjustment foot Front Lamp cover Adjustment feet Rear Bottom sideOperational range of the remote control Using the remote controlReception angle Front of projector Rear of projectorSetting up the screen Setting up your projectorBasic setup Adjusting the projection angleWith the Installation menu Setting up your projectorTo cancel the menu Trigger terminalScreen size and projection distance When the aspect ratio of the screen isWhen the aspect ratio of the image is Viewing video images Connecting the projector to video equipmentBasic home theater system connection PreparationConnecting to a DVD player or Hdtv decoder Connecting to a video player, etcWhen a TV tuner or VCR is connected Viewing video imagesConnection for video equipment having a DVI-D terminal Connection for video equipment having an Hdmi terminalPlugging in the power cord Projecting images Following cases When projected images are distorted to a trapezoidTo stop projecting How to change the settings Setting the aspect ratioWith the remote control With the Feature menuPlugging the power cord Connecting the projector to a computerViewing computer images For analog connectionProjecting images Viewing computer imagesAuto Position button When connecting to a notebook computerExample of the setting procedure for external output Menu operation Available settings in the menus How to set the menusMenu operation Image menuFeature menu Installation menuTo store the settings Signal menuTo enable the stored image quality settings AV memoryTo adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To sharpen or soften the projected image SharpnessTo adjust the tone of white Color Temp Adjusting projected imagesAbout color temperature To adjust the ratio of change in brightness Gamma ModeLPF To adjust the vertical positionPassword function Advanced featuresTo enable the password function To cancel the password functionReplacing the lamp Interval of lamp replacementCleaning of the lens Cleaning of the projector and the ventilation slotsReset of the lamp operation time Replacing the lampProblem TroubleshootingSolution No image appears on the screenNo image appears on the screen Problem Solution TroubleshootingProblem Solution Images are not displayed correctlyOthers Problem Solution Images are not displayed correctly Problem SolutionPower Status Condition Possible Solution IndicatorsNormal condition Abnormal conditionSpecifications Dimension drawings unit mmReplacement part Option/not included in the box ConnectorsSpecifications VLT-HC910LPMitsubishi Projector Contact Information
Related manuals
Manual 2 pages 24.68 Kb

HC1600 specifications

Mitsubishi Electronics HC1600 is a powerful projector that combines cutting-edge technology with user-friendly features, making it a popular choice for both home entertainment and professional presentations. This model is designed to deliver impressive image quality, versatility, and reliable performance.

One of the standout features of the HC1600 is its high brightness level, which reaches up to 3,000 lumens. This substantial brightness allows the projector to perform well even in well-lit environments, ensuring that images remain clear and vibrant. Coupled with a high contrast ratio, the HC1600 produces sharp images with excellent color reproduction, enhancing the viewing experience for movies, games, and presentations.

The HC1600 employs advanced DLP (Digital Light Processing) technology, which contributes to its reliability and longevity. DLP projectors are known for their ability to produce smooth, detailed images, minimizing the occurrence of motion blur. This makes the HC1600 an excellent choice for fast-paced content, such as sports or action films.

In terms of resolution, the HC1600 offers a native resolution of 1920 x 1080 pixels, providing full HD clarity. This level of detail allows users to appreciate every intricate aspect of their content, whether it's the subtle textures in a film or the fine print in a presentation. For added convenience, the projector also supports a variety of input formats and resolutions, making it flexible for different multimedia needs.

Connectivity options are abundant in the HC1600. It features multiple HDMI ports, USB connections, and composite video inputs, enabling seamless integration with a range of devices including laptops, gaming consoles, and media players. The inclusion of these connectivity choices enhances its versatility as a multimedia projector.

Additionally, the HC1600 includes a built-in speaker, which, while may not replace a dedicated sound system, offers decent audio quality for less complex presentations or casual movie viewing. For those who desire an immersive audio experience, external audio devices can easily be connected, elevating the overall viewing experience.

The design of the HC1600 is also worth noting. It is lightweight and compact, making it suitable for both stationary setups and portable use. Users can easily transport it to different locations, whether for business meetings, classrooms, or home movie nights.

In summary, the Mitsubishi Electronics HC1600 is a well-rounded projector that brings together brightness, resolution, and connectivity into one package. Its DLP technology ensures high quality images while its diverse input options guarantee compatibility with many devices. Whether for casual viewing or professional presentations, the HC1600 stands out as a reliable option for all multimedia needs.
Top Page Image Contents